Heatiator CL36D owner manual C. Chimney Components, Catalog #

C. Chimney Components

The following pictures show only those chimney components which may be safely used with this fireplace.

Catalog #	Description
CAK4A	Chimney Air Kit
ID4	Insulated Duct/Outside Air
UD4	Uninsulated Duct/Outside Air
SL306	Chimney Section - 6 in. (152 mm) long
SL312	Chimney Section - 12 in. (305 mm) long
SL318	Chimney Section - 18 in. (457 mm) long
SL324	Chimney Section - 24 in. (610 mm) long

ID4 Insulated Duct

4 in. (102 mm) i

42 in.

(1067 mm)

UD4 Uninsulated Duct

SL336	Chimney Section - 36 in. (914 mm) long
SL348	Chimney Section - 48 in. (1219 mm) long
SL3	Chimney Stabilizer

42 in. (1067 mm)

4 in. (102 mm) i

	SL315		Chimney Offset/Return - 15 deg
	SL330		Chimney Offset/Return - 30 deg
	FS338		Ceiling Firestop - Straight
	FS339		Ceiling Firestop - 15 deg
	FS340		Ceiling Firestop - 30 deg
	AS8		SL300 Straight Attic Insulation Shield, 24 in. (610 mm)
	JB877		Chimney Joint Band
	CB876		Chimney Bracket
	RF370		Roof Flashing - Flat to 6/12 Pitch
	RF371		Roof Flashing - 6/12 to 12/12 Pitch
	TR344		Round Termination Cap
	TR342		Round Telescoping Termination Cap
	ST375		Square Termination Cap
	TS345		Square Termination Cap
	TS345P		Square Termination Cap - Painted
	TCT375		Terra Cotta Termination Cap
 DTO134			Short Octagon Decorative Cap
	DTO146		Tall Octagon Decorative Cap
	DTS134		Short Square Decorative Cap
	DTS146		Tall Square Decorative Cap
	CT35		Chase Top
	LDS33		Decorative Shroud - 3 ft x 3 ft (.91 m x .91 m)
	LDS46		Decorative Shroud - 4 ft x 6 ft (1.22 m x 1.83 m)
	LDS-BV		Decorative Shroud - 26 in. x 26 in. (660 mm x 660 mm)
			Field Constructed Shrouds (See “Woodburning
			Termination Cap”)
	CT-3A		Adapter - May be used with the following copper caps
			CT-Series
			DT-Series
		12 in.		12 in.
				(305 mm)
	(305 mm)
	5-1/4 in.
	(133 mm)			4 in. (102 mm)

10-1/2 in.

(287 mm)

	A
8 in.	10-1/2 in.
	(267 mm)
(203 mm)
	B
	Chimney Sections

	A			B
Catalog #	in	mm	in	mm
SL306	6	152	4-3/4	121
SL312	12	305	10-3/4	273
SL318	18	457	16-3/4	425
SL324	24	610	22-3/4	578
SL336	36	914	34-3/4	883
SL348	48	1219	46-3/4	1187
A = Actual Length
B = Effective Length (length of
chimney part after it has
been snapped to another)
				Inside
	20-3/4 in.			Diameter
				8 in.
	(527 mm)		(203 mm)
4-3/4 in. (121 mm)				Outside
				Diameter
Effective Height				10-1/2 in.
SL3 Vent	Stabilizer			(267 mm)
			Inside
			Diameter
			8 in. (203 mm)
Effective			Outside
Height			Diameter
4-3/4 in.			10-1/2 in.
(121 mm)			(267 mm)

SL315/SL330 Offset/Return

CAK4A Chimney Air Kit

Heatilator • CL36D, CR36D • 12538 • Rev Z 7/12 43