Heatiator CL36D H. Glass Doors, I. Outside Air optional, K. Optional Components, L. Clear Space

Page 9
H. Glass Doors

H. Glass Doors

Glass doors are optional.

Refer to Figure 2.2 for how to properly use them.

Warning! Risk of Fire! Install ONLY doors ap- proved by Hearth & Home Technologies, Inc.

Warning! Risk of Fire and Smoke! Fireplaces equipped with doors should be operated only with doors fully open or doors fully closed. If doors are left partly open, gas and flame may be drawn out of the fireplace opening.

CORRECT

CORRECT

INCORRECT

Figure 2.2 Operating Positions of Bi-fold Doors

I. Outside Air (optional)

The outside air kit supplies some combustion air for your fireplace. It may help reduce the effects of negative air pressure. (See Section 5.D.)

Refer to Figure 2.1 for location of control

Close the inlet to prevent cold drafts when the fireplace is not being used.

Caution! Risk of Burns! The outside air control handle is HOT when fireplace is in operation. Adjust BEFORE lighting fire.

J. Vented Gas Log Sets & Gas Log Lighters

Optional

Vented gas logs or gas log lighters can be installed in this fireplace. Follow the instructions provided with the accessory for operation.

Warning! Risk of Fire or Asphyxiation!

Do NOT install unvented gas logs.

Damper must be locked open.

Gas flame may generate fumes.

K. Optional Components

Other options may be available

Consult your dealer/distributor

Warning! Risk of Fire! Do NOT install and or use any component not approved by Hearth & Home Tech- nologies Inc.

L. Clear Space

Do not place combustible objects within areas indicated in Figure 2.3.

Warning! Do NOT place combustible objects in front of the fireplace. High temperatures may ignite clothing, furniture or draperies.

Mantel - avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects.

18 in. (45.7 cm)

Clear Space

from

Opening of

Fireplace

48 in. (121.9 cm)

Clear Space

Front of Fireplace

Figure 2.3 Clear Space

Heatilator • CL36D, CR36D • 12538 • Rev Z 7/12

9

Image 9
Contents Wood Burning Fireplace Owner’s ManualModels CL36D CR36D Homeowner Reference Information CongratulationsListing Label Information/Location FIREPLACE NOInstaller Guide Table of ContentsSafety Alert Key User GuideLIMITED LIFETIME WARRANTY Limited Warranty Hearth & Home Technologies IncWARRANTY COVERAGE WARRANTY PERIODWARRANTY EXCLUSIONS WARRANTY CONDITIONSThis warranty is void if LIMITATIONS OF LIABILITYA. Appliance Certification 1Listing and Code ApprovalsB. Non-CombustibleMaterials C. Combustible Materials2Operating Instructions User GuideA. Your Fireplace Hot glass will cause burnsC. Starting a Fire B. Seasoned WoodD. Grate E. FirescreenI. Outside Air optional H. Glass DoorsJ. Vented Gas Log Sets & Gas Log Lighters K. Optional ComponentsHardwood vs Softwood M. Wood FuelMoisture Seasoned WoodB. Chimney Inspection/Cleaning 3Maintenance and ServiceA. Disposal of Ashes Creosote - Formation and Need for RemovalC. Check Firebox Refractory E. Glass CleaningD. Inspect Grate Frequency: As desiredStart Fire Problems 4Troubleshooting GuideSolution Possible Cause5Getting Started Installer GuideA. Typical Fireplace System •Illustrations/diagrams are not drawn to scaleB. Design and Installation Considerations C. DraftD. Negative Pressure E. Locating Fireplace & Chimney F. Tools and Supplies Needed G. Fireplace System RequirementsH. Inspect Fireplace and Components A. Select Fireplace Location 6Framing & ClearancesHeatilator • CL36D, CR36D • 12538 • Rev Z 7/12 B. Clearances20 in C. Sidewalls/Surrounds39 deg 50 degD. Frame the Fireplace A. Things to Consider 7Installation of FireplaceB. Position the Fireplace C. Place Protective Metal Hearth Stripsshown, but required in Note: Chimney air kit notCanada Heatilator • CL36D, CR36D • 12538 • Rev Z 7/12E. Install Outside Air Kit 8Chimney Assembly Table A. Chimney RequirementsB. Using Offsets/Returns TableExample D. Install Chimney Air Kit E. Install Ceiling FirestopsC. Assemble Chimney Sections F. Install Attic Insulation Shield H. Complete Installation I. Install FlashingG. Cut out Hole in Roof J. Chimney Termination Requirements A. Construct the Chase 9Chase InstallationsD. Install Termination Cap B. Install Fireplace & ChimneyC. Install Chase Top •Warning! Risk of Fire! The minimum overlap of•TS345/TS345P Square Termination Cap •TR342 Round Telescoping Termination Cap•ST375 Square Termination Cap •TCT375 Terra Cotta Cap10 Shrouds A. Radiation ShieldB. Field Constructed Shrouds Mailbox Style Shroud radiation shield required Figure 10.4 Roofed Style Shroud DimensionsRoofed Style Shroud radiation shield required Heatilator CL36D, CR36D 12538 Rev Z 7/12A. Non-combustibleMaterials 11 FinishingB. Combustible Materials C. Hearth ExtensionWarning! Risk of Fire D. Finishing MaterialMantel E. Combustible MantelSidewalls/Surrounds A. Gas Log/Lighter Provision 12 AccessoriesB. Wood Burning Inserts Gas Code, ANSI Z223.1A. Fireplace Dimensions 13 Reference MaterialsB. Optional Components Catalog # C. Chimney Components368 mm 14-1/2inHeatilator • CL36D, CR36D • 12538 • Rev Z 7/12 CL36D D. Service PartsStocked at DepotCR36D D. Service Parts continuedStocked at DepotE. Contact Information – NOTES –DO NOT DISCARD THIS MANUAL DO DISCARDNOT
Related manuals
Manual 48 pages 11.28 Kb