Hearth and Home Technologies 5100I-GD-B 1Listing and Code Approvals, Appliance Certification

Page 4

R

5100-I ACT WOOD INSERT

1Listing and Code Approvals

A. Appliance Certification

MODEL:

5100-I ACT Wood Insert

 

 

LABORATORY:

OMNI Test Laboratories, Inc.

 

 

REPORT NO.

061-S-59-2

 

 

TYPE:

Wood Stove

STANDARD:

UL1482 and ULC S628 and (UM)

 

84-HUD, Mobile Home Approved.

 

 

The Quadra-Fire 5100-I ACT Wood Inserts meets the U.S. Environmental Protection Agency’s 1990 particulate emis- sion standards.

B. Mobile Home Approved

D. BTU & Efficiency Specifications

EPA Certified

1.98 grams/hour

Efficiency

75.5% on Medium

BTU - EPA

50,800

 

 

Heating Capacity

up to 3,500 sq ft

 

 

Maximum Log Length

21 inches

Firebox Capacity

3.0 cubic feet

 

 

Weight

520 lbs

This appliance is approved for mobile home installations when not installed in a sleeping room and when an outside combustion air inlet is provided. The structural integrity of the mobile home floor, ceiling, and walls must be maintained. The appliance must be properly grounded to the frame of the mobile home and use only listed double-wall connector pipe. An Outside Air Kit comes standard on the appliance and must be installed in a mobile home installation.

NOTE: Hearth & Home Technologies grants no war- ranty, implied or stated, for the installation or mainte- nance of this unit and assumes no responsibility for any consequential damage(s).

C. Glass Specifications

This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please contact your dealer for replacement glass.

NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the UL1482, (UM) 84-HUD and NFPA211 in the U.S.A. and the ULC S628 and CAN/CSA-B365 Installation Codes in Canada.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appli- ance. For assistance or additional information consult a qualified installer, service agency or your dealer.

Page 

438-0380D

September 1, 2008

Image 4
Contents Advanced Combustion Technology ACT Hot glass will cause burnsLocation On right side of insert as face the appliance Serial NumberModel Name Manufactured DateTable of Contents Mobile Home Approved BTU & Efficiency Specifications Glass Specifications1Listing and Code Approvals Appliance CertificationDesign, Installation & Location Considerations Fire SafetyGetting Started Negative Pressure Tools And Supplies Needed Flue Draft ConsiderationsInspect Appliance and Components Appliance Dimensions 3Dimensions and ClearancesPanel Size Installation Masonry, Heat Circulating and *Zero Clearance Clearance to CombustiblesSideWall With 8 Mantel Deflector, Part NoInstallation Considerations Floor Protection USA & CanadaHearth Extension Calculating Alternate Floor Protection MaterialOutside Air Installation Disconnect the appliance from power supply Blower Cord LocationWiring Diagram Optional Offset AdapterVenting Components Chimney RequirementsChimney Systems Ovalizing Round Stainless Steel Liners Installing Chimney ComponentsAir Clearances Chimney Termination Requirements Masonry Fireplace USA Installations only Factory-Built Zero Clearance Fireplace6Mobile Home Installation Requirements for outside combustion air supply toAppliance Set-up Installation Outline Panel & Trim Set InstallationLeveling Bolts Securing Liner to Flue Collar Assembling TrimZero Clearance Adjustable Trim Support Size 12 d x 50 w, 2-10 hIncluded in Kit Tools Needed 22.28Operating Instructions Over-Firing Your ApplianceWood Selection & Storage Burning ProcessAir Controls Second StageFinal Stage Start-Up SystemBurn Rates Heat OutputBuilding a Fire Opacity Smoke Blower Operating InstructionsFrequently Asked Questions Issues SolutionsGeneral Maintenance Creosote Chimney CleaningGlass Cleaning Maintaining & Servicing Your ApplianceCleaning Plated Surfaces Glass Replacement Door AssemblyFrequency As needed Slide Window In / Out Loosen Remove Bolts Firebrick Replacement Nbr Brick Size QtyBlower Replacement Baffle RemovalCorrect Baffle & Blanket Placement Incorrect PositionsTroubleshooting Diagnostic Question Possible Causes of Condition SolutionsDon’t get enough/any heat. What can I do about it? Exploded Views Reference MaterialsBeginning Manufactured Date November 1 Service Parts & Accessories BRICK-438Accessories Service And Maintenance Log Date of Service Performed By Description of ServiceService And Maintenance Log Cont’d Homeowner’s Notes Warranty Policy Hearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of LiabilityHearth & Home Technologies Limited Warranty Cont’d Contact Information Dealer Telephone

5100I-NL-B, 5100I-GD-B specifications

Hearth and Home Technologies has established itself as a leader in the home heating industry, offering a wide range of high-quality fireplaces. Among their standout products are the 5100I-GD-B and 5100I-NL-B models. These two direct vent gas fireplaces not only enhance the aesthetics of a home but also provide efficient heating solutions.

The 5100I-GD-B model boasts a contemporary design that fits well in modern interiors. Equipped with a glass front, it allows for an unobstructed view of the flames, creating a cozy atmosphere in any space. The unit's high-efficiency burner maximizes heat output while minimizing gas consumption, making it an eco-friendly choice for homeowners. Additionally, the electronic ignition system ensures reliable startups, while the integrated control panel offers easy adjustments for flame height and heat settings.

On the other hand, the 5100I-NL-B model presents a more traditional design, featuring a clean face that blends seamlessly with various décor styles. Like its counterpart, this model is also engineered for efficiency, offering an impressive Annual Fuel Utilization Efficiency (AFUE) rating. This makes it an excellent choice for those looking to reduce energy costs without sacrificing comfort. The 5100I-NL-B is also equipped with an advanced combustion system that ensures complete fuel combustion, resulting in fewer emissions and a cleaner burn.

Both models feature optional accessories, including decorative media options like logs or stones, allowing homeowners to customize the look of their fireplaces. The direct vent system allows for easy installation in various locations, as it vents gases directly outside, ensuring indoor air quality is maintained.

Safety is a priority with Hearth and Home Technologies, and both models come with a safety screen and an automatic shut-off feature. This ensures peace of mind while enjoying the warmth and ambiance these fireplaces provide.

Overall, the Hearth and Home Technologies 5100I-GD-B and 5100I-NL-B gas fireplaces exemplify the perfect blend of functionality and style, making them ideal choices for anyone looking to enhance their home's heating options. With their impressive features and efficient performance, these models are designed to keep homes warm and inviting while offering options to match personal tastes.