5. Mount push button. Use either screws or double sided tape to mount push button.
To mount with screws, remove back of case by push- ing in tab on bottom with a small screwdriver (see Figure 1).
Attach back of case to door jamb or wall (see Figure 4). Snap front of push button on.
| When attaching push button using double sided tape, | |
| make sure the surface of the door jamb or wall is | |
| clean. | |
| 6. Mount chime. There are three different ways to | |
| mount the chime depending upon the model of chime | |
Figure 4 | purchased. Determine which model you purchased | |
below. Mount the chime according to the instructions | ||
| ||
| for your chime. |
Basic | Chime with Separate | Chime with Attached |
Chime | Decorative Cover | Decorative Cover |
Style of push button and chime may vary from illustration.
- - |