Troubleshooting
A.Low Battery Indicator: When the push button designated for the
B.Chime does not sound:
•Make sure push button and chime codes are the same (see Figure 9).
•Check orientation of push button and chime batteries (See diagram inside push button and chime for correct battery orientation.)
•Check charge of push button and chime batteries, replace if necessary.
C.Chime sounds when not intended (false triggers): Chime is receiving interference from another wireless device; change the code setting (see Code Setting below).
D.Batteries seem OK, but the chime does not work when installed:
•Do not mount chime or push button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime or push button off metal surface.
•Concrete floors may reduce range. Move chime away from floor.
•Try locating chime closer to push button.
E.Code Setting:
It is recommended to only change one code position at a time and then check to see if system is functioning properly.
1.Open the cases and locate the jumpers on the push button and the switches on the chime (see Figure 9).
2.The push button has eight different jumper locations and the chime has seven switches. Jumper positions 1 through 7 on the push button and the switches on the chime are used for setting the code.
3.To change the code, either:
•Add a jumper to the push button and set the matching chime switch to “ON” or...
•Remove a jumper on the push button and set the matching chime switch to “OFF” or...
•Move a jumper in the push button from one location to another.Turn “OFF” the chime switch matching the first location and turn “ON” the chime switch matching the new location of the jumper.
Note: Code positions 1 through 7 must be exactly the same for both the push button and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the push button and switch locations 5, 6, and 7 in the “ON” position on the chime (see Figure 9).
The range of the wireless chime can vary with location, temperature, and battery condition.
- - |