Hearth and Home Technologies 820-0721 warranty Wood Stove

Page 1

R

 

Tested and

Portland

5700 WOOD STOVE

Listed by

O-T L Oregon USA

C

US

OMNI-Test Laboratories, Inc.

Advanced Combustion Technology (ACT)

 

 

Owner’s Manual

VERY IMPORTANT!!

Installation and Operation

BEFORE STARTING

 

 

YOUR FIRST FIRE READ

Model:

HOW TO OPERATE

 

THE 2-STEP DOOR

820-0721

HANDLE

ON PAGE 19

 

This manual contains instructions for Installation, Operation & Maintenance.

Please read this entire manual before you install and use your new room heater. Failure to follow

instructions may result in property damage, bodily injury, or even death.

IMPORTANT SAFETY NOTES:

1)When installing your stove, particular attention should be paid to fire protection. If this room heater is not properly installed, a house fire may result. To reduce the risk of fire, follow the installation instructions. Contact local building, fire officials or authority having jurisdiction about restrictions, installation inspection and permit requirements in your area.

2)CAUTION: Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or “freshen up” a fire in this heater. Keep all such liquids well away from the heater while it is in use.

3)During operation, if any part of the stove starts to glow, the stove is in an overfired condition. Close the air controls completely by pulling them out, until the glowing has stopped. OVERFIRING VOIDS YOUR WARRANTY!

4)Cool ashes should be disposed of carefully, using a metal container.

5)Do not burn wet or green wood. Store wood in a dry location.

6)Do not burn garbage OR FLAMMABLE FLUIDS SUCH AS GASOLINE, NAPHTHA OR ENGINE OIL. Do not burn treated wood, or wood with salt (driftwood, etc.). Burning materials other than wood (including charcoal) under adverse conditions may generate carbon monoxide in the home, resulting in illness or possible death.

7)Do not permit creosote or soot to accumulate excessively in the chimney or inside the firebox.

8)Check your chimney system thoroughly when installing into an existing metal or masonry chimney. Seek professional advice if in doubt about its condition.

9)Do not connect this unit to a chimnney flue already serving another appliance.

10)Comply with all minimum clearances to combustibles as shown in this manual for this appliance.

11)Build fire on brick firebox floor. Do not use grates, andirons or other methods to support fuel.

12)HOT WHILE IN OPERATION! Keep children, pets, clothing and furniture away. Contact can cause skin burns.

13)Do not connect to any air distribution duct or system.

14)RISK OF FIRE! Do not operate with stove door or ash removal system door open.

15)For further information refer to NFPA 211 (US) or CAN/CSA-B365 (Canada).

16)Do not operate without fully assembling all components. Burning your stove wthout the legs attached will void your warranty, and could present a serious safety hazard.

17)Do not operate with broken glass.

PRIOR TO FIRST FIRE: Remove all labels from glass. Clean plated surfaces with a glass cleanser and soft

cloth to prevent staining from fingerprint oils.

SAVE THESE INSTRUCTIONS

1445 North Highway

 

www.quadrafire.com

Colville, WA 99114-2008

250-7090E September 1, 2008

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Wood Stove Location On right side of insert as face the appliance Sample of Serial Number / Safety LabelTable of Contents Installation Materials Needed for Safety Listings & Safety CautionsLocating Your Stove DimensionsClearances to Combustibles UL and ULC Serial Number / Safety Label Location On Back of StoveUSA Floor ProtectionAlternate Materials Worksheet Floor Protection Cont’dChimney HEIGHT/DRAFT Masonry Chimney Cont’d Flue SystemsMasonry Chimney Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Cont’d Interior Chimney Connection to a Metal PRE-FABRICATED ChimneyMobile Home Installation ARS Operating and Cleaning ASH Removal System ARS InstallationLEG Model Pedestal ModelLEG Model Pedestal or LEG KIT Installation Pedestal ModelAdjusting the Blower Speed CONTROL, if Necessary Installation of Optional BLOWER, PartPedestal Model Outside AIR KIT InstallationAIR Controls Building a Fire Operating Instructions Cont’dBurn Rates OpacityWood Selection and Storage Blower Operating InstructionsChimney Cleaning Maintenance and Glass CareCreosote Glass CareReplace with 5mm ceramic glass only Glass ReplacementBaffle Removal and Installation Door Handle AssemblySpring Handle Warning Service Parts AccessoriesAppliance Exploded Views DOOR, Glass and Door Handle AssemblyService And Maintenance Log Service And Maintenance Log Cont’d Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d ACT Wood Stove

820-0721 specifications

Hearth and Home Technologies (HHT) 820-0721 is a premium fireplace and heating solution that exemplifies modern design and innovative technology. Designed for comfort and efficiency, the 820-0721 model brings together aesthetic appeal and advanced functionality, making it an ideal choice for homeowners seeking to enhance their living spaces.

One of the key features of the HHT 820-0721 is its advanced heating capabilities. Utilizing cutting-edge technology, this fireplace delivers impressive heating performance while maintaining energy efficiency. The model is engineered to provide consistent warmth, ensuring that any room remains cozy even during the coldest months of the year. With its ability to efficiently convert fuel into heat, users can enjoy optimal warmth while minimizing energy costs.

Additionally, the HHT 820-0721 incorporates a range of customization options. Homeowners can choose from a variety of styles, finishes, and sizes, allowing them to tailor the fireplace to their specific decor preferences. The sleek and modern design complements a wide array of interiors, from traditional to contemporary, making it a versatile addition to any home.

The technology behind the HHT 820-0721 is also noteworthy. Equipped with advanced safety features, this fireplace includes an automated shut-off system that ensures safe operation. The unit is designed to prevent overheating and includes protective screens that mitigate the risk of accidental burns. These safety enhancements provide peace of mind for families who prioritize both style and security.

The HHT 820-0721 is also user-friendly, featuring intuitive controls that make it easy to adjust temperature settings. Moreover, many models come with remote control options, allowing users to operate their fireplace from anywhere in the room. This convenience adds to the overall appeal of the unit, making it simple to create the perfect ambiance without the hassle of manual adjustments.

In summary, the Hearth and Home Technologies 820-0721 is a premium fireplace solution that excels in heating efficiency, design flexibility, and safety features. Its modern aesthetics, combined with advanced technology and ease of use, make it an outstanding choice for those looking to enhance their home's comfort and visual appeal. As homeowners continue to seek innovative heating solutions, the HHT 820-0721 stands out as a leader in the market.
Top Page Image Contents