Hearth and Home Technologies 820-0721 Pedestal or LEG KIT Installation Pedestal Model, LEG Model

Page 16

5700 ACT Wood Stove

R

PEDESTAL OR LEG KIT INSTALLATION

WARNING: DO NOT OPERATE STOVE BEFORE FULLY ASSEMBLING ALL COMPONENTS. BURNING YOUR STOVE WITHOUT A PEDESTAL OR LEG KIT ATTACHED WILL VOID YOUR WARRANTY AND COULD PRESENT A SAFETY HAZARD.

PEDESTAL MODEL

1 Place protective pad or stove pallet on floor.

2.Lay body of stove on its back on protective pad or pallet.

3.Loosen screws on adapter and slide pedestal over adapter on bottom of stove

4.Line up holes in sides of pedestal with holes in adapter.

5.Securely tighten pedestal into place.

6.Carefully stand stove up and place in desired loca- tion.

7.Slip wooden decorative strips onto pedestal edges.

8.Open door of stove and check to make sure firebricks and ceramic blanket are in their proper locations (see pages 23-24).

)FFINSTALLING LEGS REMOVEE THESEESCREWSSTOOATTACHA LEGEBRACKETSTTOOBOTTOM OF STOVE

FIGURE 16A

LEG MODEL

1.Remove leg mounting brackets packaged inside fire- box.

2.Place protective pad or stove pallet on floor.

3.Lay body of stove on its back on protective pad or pallet.

4Remove the bolts, using a 9/16” Hex Head socket or wrench, from the adapter and save.

5.Secure mounting brackets to the bottom of the stove with 1/4”-20 Phillips screws. See Figure 16A. These screws are located on the outer skin at the bottom rear of the stove.

6.Loosely assembly bolts into the corner of the mounting brackets.

7.Slide legs onto mounting brackets and tighten.

8.Carefully stand stove up and place in desired location.

9.Use leveling bolts on legs to stabilize and level stove.

10.Open door of stove and check to make sure firebricks and ceramic blanket are in their proper locations (see pages 23-24).

Leg MOUNTINg brACKeTS

(packaged inside stove firebox).

FIGURE 16B

CAUTION! DO NOT TILT THE UNIT ON THE CAST IRON LEGS. Lift the unit upright and place it into position on the floor protector.

Page 16

250-7090E

September 1, 2008

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Wood Stove Sample of Serial Number / Safety Label Location On right side of insert as face the applianceTable of Contents Listings & Safety Cautions Installation Materials Needed for SafetyDimensions Locating Your StoveSerial Number / Safety Label Location On Back of Stove Clearances to Combustibles UL and ULCFloor Protection USAFloor Protection Cont’d Alternate Materials WorksheetChimney HEIGHT/DRAFT Masonry Chimney Cont’d Flue SystemsMasonry Chimney Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Cont’d Connection to a Metal PRE-FABRICATED Chimney Interior ChimneyMobile Home Installation ASH Removal System ARS Installation ARS Operating and CleaningLEG Model Pedestal ModelPedestal or LEG KIT Installation Pedestal Model LEG ModelInstallation of Optional BLOWER, Part Adjusting the Blower Speed CONTROL, if NecessaryOutside AIR KIT Installation Pedestal ModelAIR Controls Operating Instructions Cont’d Building a FireOpacity Burn RatesWood Selection and Storage Blower Operating InstructionsMaintenance and Glass Care Chimney CleaningCreosote Glass CareGlass Replacement Replace with 5mm ceramic glass onlyBaffle Removal and Installation Door Handle AssemblySpring Handle Warning Service Parts AccessoriesAppliance DOOR, Glass and Door Handle Assembly Exploded ViewsService And Maintenance Log Service And Maintenance Log Cont’d Homeowner’s Notes Warranty Policy CONDITIONS, Exclusions & Limitation of LiabilityHearth & Home Technologies Limited Warranty Cont’d ACT Wood Stove

820-0721 specifications

Hearth and Home Technologies (HHT) 820-0721 is a premium fireplace and heating solution that exemplifies modern design and innovative technology. Designed for comfort and efficiency, the 820-0721 model brings together aesthetic appeal and advanced functionality, making it an ideal choice for homeowners seeking to enhance their living spaces.

One of the key features of the HHT 820-0721 is its advanced heating capabilities. Utilizing cutting-edge technology, this fireplace delivers impressive heating performance while maintaining energy efficiency. The model is engineered to provide consistent warmth, ensuring that any room remains cozy even during the coldest months of the year. With its ability to efficiently convert fuel into heat, users can enjoy optimal warmth while minimizing energy costs.

Additionally, the HHT 820-0721 incorporates a range of customization options. Homeowners can choose from a variety of styles, finishes, and sizes, allowing them to tailor the fireplace to their specific decor preferences. The sleek and modern design complements a wide array of interiors, from traditional to contemporary, making it a versatile addition to any home.

The technology behind the HHT 820-0721 is also noteworthy. Equipped with advanced safety features, this fireplace includes an automated shut-off system that ensures safe operation. The unit is designed to prevent overheating and includes protective screens that mitigate the risk of accidental burns. These safety enhancements provide peace of mind for families who prioritize both style and security.

The HHT 820-0721 is also user-friendly, featuring intuitive controls that make it easy to adjust temperature settings. Moreover, many models come with remote control options, allowing users to operate their fireplace from anywhere in the room. This convenience adds to the overall appeal of the unit, making it simple to create the perfect ambiance without the hassle of manual adjustments.

In summary, the Hearth and Home Technologies 820-0721 is a premium fireplace solution that excels in heating efficiency, design flexibility, and safety features. Its modern aesthetics, combined with advanced technology and ease of use, make it an outstanding choice for those looking to enhance their home's comfort and visual appeal. As homeowners continue to seek innovative heating solutions, the HHT 820-0721 stands out as a leader in the market.
Top Page Image Contents