Hearth and Home Technologies 820-0721 warranty Installation of Optional BLOWER, Part

Page 17

R

5700 ACT Wood Stove

 

INSTALLATION OF OPTIONAL BLOWER, Part 831-1701

The blower is shipped fully assembled and ready for installation.

1.Remove the three bolts (1/4”-20 Phillips Head) on the outer skin at the bottom rear of stove.

2.Align holes in mounting flange of blower with bolt holes in stove. Blower should be positioned around bottom of rear outer skin as shown in drawing below.

3.Re-insert and tighten bolts, securing blower onto outer wall of stove.

Do not remove ground from plug. Plug blower cord into a grounded outlet. Route power cord away from stove in such a manner to avoid heat from the stove, traffic, or other damage. Do not route cord under or in front of stove.

ADJUSTING THE BLOWER SPEED CONTROL, IF NECESSARY*

*The blower speed control for this unit is adjusted at the factory and normally does not

require further adjustment.

NOTE: When the speed control is turned clockwise, it will click on to high speed. Continue to turn the speed control clockwise to decrease the speed. At full clockwise, the blower should blow gently, but should not stop.

1.With the unit plugged in, turn the speed control knob to slow (full clockwise).

2.With a small screwdriver, adjust the blower speed by turning the adjustment mechanism through the hole on the side of the speed control.

3.Adjust the speed so the blower runs slowly, but does not stop. Turn clockwise to slow the blower and counterclockwise to increase the speed.

bLOWer SPeeD CONTrOL

 

blower

Outer

Skin

Mounting

 

Flange

 

FIGURE 17A

September 1, 2008

250-7090E

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Wood Stove Location On right side of insert as face the appliance Sample of Serial Number / Safety LabelTable of Contents Installation Materials Needed for Safety Listings & Safety CautionsLocating Your Stove DimensionsClearances to Combustibles UL and ULC Serial Number / Safety Label Location On Back of StoveUSA Floor ProtectionAlternate Materials Worksheet Floor Protection Cont’dChimney HEIGHT/DRAFT Masonry Chimney Flue SystemsMasonry Chimney Cont’d Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Cont’d Interior Chimney Connection to a Metal PRE-FABRICATED ChimneyMobile Home Installation ARS Operating and Cleaning ASH Removal System ARS InstallationLEG Model Pedestal ModelLEG Model Pedestal or LEG KIT Installation Pedestal ModelAdjusting the Blower Speed CONTROL, if Necessary Installation of Optional BLOWER, PartPedestal Model Outside AIR KIT InstallationAIR Controls Building a Fire Operating Instructions Cont’dBurn Rates OpacityWood Selection and Storage Blower Operating InstructionsChimney Cleaning Maintenance and Glass CareCreosote Glass CareReplace with 5mm ceramic glass only Glass ReplacementSpring Handle Warning Door Handle AssemblyBaffle Removal and Installation Appliance AccessoriesService Parts Exploded Views DOOR, Glass and Door Handle AssemblyService And Maintenance Log Service And Maintenance Log Cont’d Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d ACT Wood Stove

820-0721 specifications

Hearth and Home Technologies (HHT) 820-0721 is a premium fireplace and heating solution that exemplifies modern design and innovative technology. Designed for comfort and efficiency, the 820-0721 model brings together aesthetic appeal and advanced functionality, making it an ideal choice for homeowners seeking to enhance their living spaces.

One of the key features of the HHT 820-0721 is its advanced heating capabilities. Utilizing cutting-edge technology, this fireplace delivers impressive heating performance while maintaining energy efficiency. The model is engineered to provide consistent warmth, ensuring that any room remains cozy even during the coldest months of the year. With its ability to efficiently convert fuel into heat, users can enjoy optimal warmth while minimizing energy costs.

Additionally, the HHT 820-0721 incorporates a range of customization options. Homeowners can choose from a variety of styles, finishes, and sizes, allowing them to tailor the fireplace to their specific decor preferences. The sleek and modern design complements a wide array of interiors, from traditional to contemporary, making it a versatile addition to any home.

The technology behind the HHT 820-0721 is also noteworthy. Equipped with advanced safety features, this fireplace includes an automated shut-off system that ensures safe operation. The unit is designed to prevent overheating and includes protective screens that mitigate the risk of accidental burns. These safety enhancements provide peace of mind for families who prioritize both style and security.

The HHT 820-0721 is also user-friendly, featuring intuitive controls that make it easy to adjust temperature settings. Moreover, many models come with remote control options, allowing users to operate their fireplace from anywhere in the room. This convenience adds to the overall appeal of the unit, making it simple to create the perfect ambiance without the hassle of manual adjustments.

In summary, the Hearth and Home Technologies 820-0721 is a premium fireplace solution that excels in heating efficiency, design flexibility, and safety features. Its modern aesthetics, combined with advanced technology and ease of use, make it an outstanding choice for those looking to enhance their home's comfort and visual appeal. As homeowners continue to seek innovative heating solutions, the HHT 820-0721 stands out as a leader in the market.
Top Page Image Contents