Hearth and Home Technologies 820-0721 warranty Floor Protection, Usa

Page 7

R

5700 ACT Wood Stove

 

FLOOR PROTECTION

FLOOR PROTECTION: Floor protector must be non-combustible material, extending beneath heater and to the front/sides/rear as indicated. The floor must be non-combustible or otherwise adequately protected from radiant heat given off by the unit and from sparks and falling embers. A layer of thin brick or ceramic tile over a combustible floor is not sufficient. A listed hearth pad that has a “k” value of .84 or lower meets this requirement.

In US installations, it is necessary to install a floor protector of 1/2" thick metal clad millboard (“k” value = .84) or equivalent at least 16" (457mm) in front of glass door and 8" (203mm) to both sides of the fuel loading door. Open the door and measure 8” (203mm) from the side edge of the opening in the face of the stove. See *exception below.

See Alternate Materials Worksheet on Page 8 to determine if alternate floor protection materials are acceptable.

In Canada, similar floor protection must be provided 18" (457mm) in front and 8" (203mm) from the sides and rear of the stove. See *exception below.

*Exception: Non-combustile floor protection must extend beneath the flue pipe when installed with horizontal venting and extend 2” (51mm) beyond each side.

NOTE: Drawings are for illustration purposes only and are not to scale.

4-13/16"

3-3/16"

44-9/16" minimum

Fuel loading door

8"

16" from glass

USA

33-5/8"

minimum

 

 

 

52-13/16 in.

 

 

-5/8

.

optional

 

 

33

 

in

coverage

 

 

 

 

 

 

 

 

 

 

 

32-1/16 in.

 

 

 

135°

 

 

 

 

 

.

.

 

 

 

 

in

 

.

 

in

-7/8

in

 

-5/16

-1/16

 

 

 

3

 

44

 

 

29

USA

 

 

 

 

 

203mm (8")

203mm

203mm

(8")

(8")

457mm (18")

CANADA

1083mm (42-5/8") minimum

1387mm (54-9/16") minimum

USA

must extend 2" beyond each side of pipe

USA - Required

Canada - Recommended

Vent Specifications

Single Wall: Six inch (6”) (152mm) diameter, minimum 24 MSG black or blued steel connector pipe, with a Listed factory-built chimney type UL103 HT* suitable for use with solid fuels, or a masonry chimney, and the referenced clearances.

Double Wall: Six inch (6”) (152mm) diameter, listed double wall air insulated connector pipe with Listed factory-built UL103 HT* Class “A” chimney, or a masonry chimney (Mobile Home must be equipped with a spark arrestor), and the referenced clearances.

*In Canada must comply with CAN/ULC-S269-for the 650° C Factory-built chimney

September 1, 2008

250-7090E

Page

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Wood Stove Location On right side of insert as face the appliance Sample of Serial Number / Safety LabelTable of Contents Installation Materials Needed for Safety Listings & Safety CautionsLocating Your Stove DimensionsClearances to Combustibles UL and ULC Serial Number / Safety Label Location On Back of StoveUSA Floor ProtectionAlternate Materials Worksheet Floor Protection Cont’dChimney HEIGHT/DRAFT Masonry Chimney Cont’d Flue SystemsMasonry Chimney Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Cont’d Interior Chimney Connection to a Metal PRE-FABRICATED ChimneyMobile Home Installation Pedestal Model ASH Removal System ARS InstallationARS Operating and Cleaning LEG ModelLEG Model Pedestal or LEG KIT Installation Pedestal ModelAdjusting the Blower Speed CONTROL, if Necessary Installation of Optional BLOWER, PartPedestal Model Outside AIR KIT InstallationAIR Controls Building a Fire Operating Instructions Cont’dBlower Operating Instructions OpacityBurn Rates Wood Selection and StorageGlass Care Maintenance and Glass CareChimney Cleaning CreosoteReplace with 5mm ceramic glass only Glass ReplacementBaffle Removal and Installation Door Handle AssemblySpring Handle Warning Service Parts AccessoriesAppliance Exploded Views DOOR, Glass and Door Handle AssemblyService And Maintenance Log Service And Maintenance Log Cont’d Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d ACT Wood Stove

820-0721 specifications

Hearth and Home Technologies (HHT) 820-0721 is a premium fireplace and heating solution that exemplifies modern design and innovative technology. Designed for comfort and efficiency, the 820-0721 model brings together aesthetic appeal and advanced functionality, making it an ideal choice for homeowners seeking to enhance their living spaces.

One of the key features of the HHT 820-0721 is its advanced heating capabilities. Utilizing cutting-edge technology, this fireplace delivers impressive heating performance while maintaining energy efficiency. The model is engineered to provide consistent warmth, ensuring that any room remains cozy even during the coldest months of the year. With its ability to efficiently convert fuel into heat, users can enjoy optimal warmth while minimizing energy costs.

Additionally, the HHT 820-0721 incorporates a range of customization options. Homeowners can choose from a variety of styles, finishes, and sizes, allowing them to tailor the fireplace to their specific decor preferences. The sleek and modern design complements a wide array of interiors, from traditional to contemporary, making it a versatile addition to any home.

The technology behind the HHT 820-0721 is also noteworthy. Equipped with advanced safety features, this fireplace includes an automated shut-off system that ensures safe operation. The unit is designed to prevent overheating and includes protective screens that mitigate the risk of accidental burns. These safety enhancements provide peace of mind for families who prioritize both style and security.

The HHT 820-0721 is also user-friendly, featuring intuitive controls that make it easy to adjust temperature settings. Moreover, many models come with remote control options, allowing users to operate their fireplace from anywhere in the room. This convenience adds to the overall appeal of the unit, making it simple to create the perfect ambiance without the hassle of manual adjustments.

In summary, the Hearth and Home Technologies 820-0721 is a premium fireplace solution that excels in heating efficiency, design flexibility, and safety features. Its modern aesthetics, combined with advanced technology and ease of use, make it an outstanding choice for those looking to enhance their home's comfort and visual appeal. As homeowners continue to seek innovative heating solutions, the HHT 820-0721 stands out as a leader in the market.
Top Page Image Contents