Hearth and Home Technologies 820-0721 warranty ASH Removal System ARS Installation, LEG Model

Page 15

R

ASH REMOVAL SYSTEM (ARS) INSTALLATION

1.Place protective pad or stove pallet on floor.

2.Lay body of stove on its back on protective pad or pallet.

3.Remove ash removal system top and bottom cover plates by loosening nuts under stove. Discard both plates.

5700 ACT Wood Stove

ARS OPERATING AND CLEANING

1.When stove is cool, open front door and brush most of the ash into the center of the firebox. Remember to leave 1/4” to 1/2” (6-13mm) of ash on the firebox floor to act as a natural grate, allowing air to flow freely underneath wood.

STOVe bOTTOM

TOP COVer

grATe

 

PLATe

 

 

 

 

NUTS

 

FIGURE 15A

4.Using a rubber mallet, install plugs (supplied) into two front holes, See Figure 15B.

5.Line up holes in ash removal system with holes in adapter on bottom of stove.

6.Screw ash removal system securely in place.

7.Insert ashpan into ash removal system box, making sure the overhanging lip is facing towards you.

8.Attach legs or pedestal.

CAUTION FOR NOTE LEG MODELS: DO NOT TILT THE UNIT ON THE CAST IRON LEGS. Lift the unit upright and place it into position on the floor protector.

9.After righting stove, insert ash removal system grate into opening in firebox floor.

DISCARD

INSTALL PLUGS

INTO THESE TWO

HOLES

FIGURE 15b

2.Clean ash down through the ash removal system grate into the drawer below. If there are large pieces in the ashes, you can remove the grate before brushing the ash into the drawer. Be sure to replace the grate before operating the stove.

3.Swing open ash removal door on leg model. (On the pedestal model, first pull down the hinged pedestal front to expose the ash removal door).

4.Pull out the ash drawer. CLOSE the ash removal door. (Closing this door avoids ash blowing into the room in the event of a downdraft).

5.Empty the ashes following the directions below.

6.Swing open ash removal door and replace ash drawer with the overhanging lip facing toward you.

7.Close ash removal door securely.

Disposal of Ashes. Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a non-combustible floor or on the ground, well away from all combustible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled.

Ash

Drawer

 

LEG MODEL

 

 

Ash

Drawer

 

 

 

 

 

Pull down

pedestal

front

first

 

 

 

 

 

 

 

PEDESTAL MODEL

September 1, 2008

250-7090E

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Wood Stove Location On right side of insert as face the appliance Sample of Serial Number / Safety LabelTable of Contents Installation Materials Needed for Safety Listings & Safety CautionsLocating Your Stove DimensionsClearances to Combustibles UL and ULC Serial Number / Safety Label Location On Back of StoveUSA Floor ProtectionAlternate Materials Worksheet Floor Protection Cont’dChimney HEIGHT/DRAFT Flue Systems Masonry Chimney Cont’dMasonry Chimney Solid Pack Chimney with Metal Supports AS a Thimble Solid Pack Chimney with Metal Supports AS a Thimble Cont’d Interior Chimney Connection to a Metal PRE-FABRICATED ChimneyMobile Home Installation Pedestal Model ASH Removal System ARS InstallationARS Operating and Cleaning LEG ModelLEG Model Pedestal or LEG KIT Installation Pedestal ModelAdjusting the Blower Speed CONTROL, if Necessary Installation of Optional BLOWER, PartPedestal Model Outside AIR KIT InstallationAIR Controls Building a Fire Operating Instructions Cont’dBlower Operating Instructions OpacityBurn Rates Wood Selection and StorageGlass Care Maintenance and Glass CareChimney Cleaning CreosoteReplace with 5mm ceramic glass only Glass ReplacementDoor Handle Assembly Baffle Removal and InstallationSpring Handle Warning Accessories Service PartsAppliance Exploded Views DOOR, Glass and Door Handle AssemblyService And Maintenance Log Service And Maintenance Log Cont’d Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d ACT Wood Stove

820-0721 specifications

Hearth and Home Technologies (HHT) 820-0721 is a premium fireplace and heating solution that exemplifies modern design and innovative technology. Designed for comfort and efficiency, the 820-0721 model brings together aesthetic appeal and advanced functionality, making it an ideal choice for homeowners seeking to enhance their living spaces.

One of the key features of the HHT 820-0721 is its advanced heating capabilities. Utilizing cutting-edge technology, this fireplace delivers impressive heating performance while maintaining energy efficiency. The model is engineered to provide consistent warmth, ensuring that any room remains cozy even during the coldest months of the year. With its ability to efficiently convert fuel into heat, users can enjoy optimal warmth while minimizing energy costs.

Additionally, the HHT 820-0721 incorporates a range of customization options. Homeowners can choose from a variety of styles, finishes, and sizes, allowing them to tailor the fireplace to their specific decor preferences. The sleek and modern design complements a wide array of interiors, from traditional to contemporary, making it a versatile addition to any home.

The technology behind the HHT 820-0721 is also noteworthy. Equipped with advanced safety features, this fireplace includes an automated shut-off system that ensures safe operation. The unit is designed to prevent overheating and includes protective screens that mitigate the risk of accidental burns. These safety enhancements provide peace of mind for families who prioritize both style and security.

The HHT 820-0721 is also user-friendly, featuring intuitive controls that make it easy to adjust temperature settings. Moreover, many models come with remote control options, allowing users to operate their fireplace from anywhere in the room. This convenience adds to the overall appeal of the unit, making it simple to create the perfect ambiance without the hassle of manual adjustments.

In summary, the Hearth and Home Technologies 820-0721 is a premium fireplace solution that excels in heating efficiency, design flexibility, and safety features. Its modern aesthetics, combined with advanced technology and ease of use, make it an outstanding choice for those looking to enhance their home's comfort and visual appeal. As homeowners continue to seek innovative heating solutions, the HHT 820-0721 stands out as a leader in the market.
Top Page Image Contents