LG Electronics 3828A20025U Be sure not to do Be sure to follow the instruction, Installation

Page 4

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

WARNING

This symbol indicates the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage.

Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING

ENGLISH

Installation

Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

Install the panel and the cover of control box securely.

There is risk of fire or electric shock.

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

Do not disassemble or repair the product. There is risk of fire or electric shock.

Always install a dedicated circuit and breaker.

Improper wiring or installation may cause fire or electric shock

Always ground the product.

There is risk of fire or electric shock.

Use the correctly rated breaker or fuse.

There is risk of fire or electric shock.

Installation Manual 3

Image 4
Contents No A20025U LG Floor Standing Type Air Conditioner Table of Contents Installation Be sure not to do Be sure to follow the instructionAlways ground the product Use the correctly rated breaker or fuseBe sure the installation area does not deteriorate with age OperationKeep level even when installing the product Installation or repair of product Drained away properlyUse two or more people to lift and transport the product Indoor unit Selection of the best locationOutdoor unit Piping length and the elevation Outdoor unit Installation Indoor Unit InstallationRefrigerant amount Installation guide at the seaside Selecting the locationOutdoor UnitInstallation Method Installation works DescriptionsPreparation of installation parts and tools Installation Parts, Tools UsePreparation of Piping Connection of piping Precautions in bendingMove the indoor tubing and drain hose to the hole Connecting the Cable to Indoor Unit Wiring DetailsBConnecting the cables to the outdoor unit Connecting pipings to the outdoor unitConnect wires to the terminals on the control Power supply Power Supply and WiringWiring Vacuum Drying of the Connecting Pipes and the Indoor Unit Form the Piping Final Check and Test Run