Door Options
Tabs |
Tabs |
Fig. 42 |
Fig. 43 |
"Sunrise" Gold Trim
Gold Door
This kit includes a gold trim piece for the ash lip and a gold Sunrise piece for the door. See Fig. 42.
Referring to the diagram, page 5, note how the various components of the door system fit together. Lay the load door face down on a soft surface.
Clean the glass thoroughly using a nonabra- sive glass cleaner. Install the glass gasket around the outer edge of the front face of the door glass carefully to insure proper sealing.
Note: There are 4 tabs on the Sunrise. These tabs have a step on the front side and are flush on the back side. Place the "Sunrise" in the door so the step side is to the front.
Set the glass pane gently onto the door. In- stall the
To install ash lip trim, simply slide the trim over the ash lip and into the groove on the trim.
The gold door (fig. 43) is assembled and in- stalled the same as the standard door. Refer to page
5.Be careful not to scratch the glass and be sure to clean the gold before starting a fire in the stove.
To install ash lip trim, simply slide the trim over the ash lip and into the groove on the trim.
Cleaning Gold
The gold plated door and gold Sunrise should never be buffed or polished. Abrasive cleansers and metal polishes will remove the plating and therefore should never be used. If the gold needs to be cleaned, wait until the stove is completely cool, then use a sponge, soap and water to gently remove dirt and stains. Before relighting the stove, remove all soap residue and wipe dry.
24 PC 45 Corn/Pellet Stove