| Door Assembly/Installation Tips | ||
| Bottom Glass Retainer Clip Instructions | ||
| (2) Glass Retainer Clips | Follow the instructions in the door kit except for the | |
| bottom glass retainers. Install the special glass | ||
| supplied with the door kit | ||
| retainer clips to the bottom of the door. | ||
|
|
| |
|
|
| There is a left and right retainer clip with a radius to |
|
|
| match the door bottom. The fiber glass rope on the |
|
|
| clip must be facing the stove body when installed, |
(4) |
| NOT FACING THE GLASS!! | |
screws supplied in the door kit |
|
| |
|
|
| These clips are designed to direct the air wash air |
|
|
| more evenly. |
Gasket goes | (1) left hand |
|
|
|
|
| |
toward the stove | (2) glass retainer clips | Gasket |
|
| (1) right hand | goes |
|
Fig. 3 | toward |
| |
| the stove |
| |
HINGE |
| DOOR | |
|
| ||
PINS |
|
| |
GLASS |
| PAW | |
|
| BOLT | |
|
| GLASS | |
4 GLASS |
| GASKET | |
|
| ||
RETAINER |
|
| |
CLIPS |
| 4 GLASS RETAINER | |
Fig. 4 |
| BOLTS | |
|
| ||
| BRASS | ||
|
| HANDLE | |
SET |
|
| |
SCREW |
|
| |
WOOD |
| HANDLE | |
HANDLE | |||
BOLT | |||
|
| ||
Assembling the door
•Referring to the diagram, note how the various components of the door system fit together.
•Lay the load door face down on a soft surface.
•Clean the glass and gold door using a nonabrasive cleaner. Install the glass gasket around the outer edge of the front face of the door glass carefully to insure proper sealing. Set the glass pane gently onto the door. Install the
•Install door on stove with hinge pins.
•Install door handle as shown on the diagram. NOTE: With the flat surface of the paw bolt to the inside of the door.
•Turn the paw bolt "in" for approx. (17) turns.
•Turn the brass elbow onto the paw bolt approx. (5) turns.
•Align the set screw with the flat spot on the paw and tighten.
•After attaching the door handle, close and latch the door by turning the handle to the six o'clock position. Does the door rope compress? If not, loosen the set screw, turn the paw bolt one more turn into the door. Repeat as required to achieve a tight door fit.
NOTE: Remember to thoroughly clean the glass and the gold door frame before lighting the stove for the first time.
Fig. 5 | PC 45 Corn/Pellet Stove 5 |
|