Introduction
The Advance Pellet Heater
This heating appliance does not just have automatic ignition, it has total automatic temperature control. The Advance uses a small room sensor rather then a wall thermostat for a more accurate temperature control.
The Advance's control panel is designed for easy and efficient operation. It has 2 automatic modes of operation and 2 manual modes of operation. The Advance's specially designed burn pot and the "Advance Igniter" Automatic Ignition System, allow the unit to burn a large variety of biomass fuels with varying ash content. The Advance feed system has a maximum feed rate of 6 lbs. per hour and a minumum (maintenance) feed rate of 1.0 lbs. per hour.
This 0 to 48,000 BTU pellet stove has an accordian style heat exchanger system that allows maximum surface area for the most efficient heat transfer in a smaller firebox.
The unit has an easy to clean combustion system with an ash pan that holds ash from 1 ton of burned premium pellets. This unit is equipped with several different safety devices which will be explained later in this manual.
Please copy your serial number fromthe label on your stove to the box below.
SERIAL NUMBER
SAFETY NOTICE: IF THIS HARMAN ADVANCE PELLET STOVE IS NOT PROPERLY INSTALLED. AHOUSE FIRE MAY RESULT. FOR YOUR SAFETY, FOLLOW THE INSTAL- LATION DIRECTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALSABOUT RESTRICTIONSAND INSTALLA- TION INSPECTION REQUIREMENTS IN YOUR AREA.
Harman Stove Company 352 Mountain House Road Halifax, PA 17032 sales@harmanstoves.com
Table of Contents
Automatic Operation | 3 |
Manual Operation | 5 |
ESP Control | 7 |
Assembly & Installation | 8 |
Venting | 12 |
Maintenance | 19 |
26 | |
Specifications | 27 |
Wiring Diagram | 28 |
Feeder Parts | 29 |
Parts List | 30 |
Warranty | 31 |
2