A
B
1 | 2 |
4 | 5a |
6 | 7 |
9 | 10 |
12 | 13 |
10
3
5b
8
11
14
English
REPLACING THE DUST BAG,
1The dust bag,
2Fold down the carrying handle. Press the catches on the hose, remove the hose and open the cover.
3Lift out the insert holding the
4Pull the cardboard to remove the
5a Insert a new
5 b Attach the insert by placing it on the back pegs in the bag compartment. Then fold down the insert and close the cover.
Note. Replace the
Replacement of the motor filter (Ref. No. EF54)
should be done with every 5th replacement of the dust bag,
6Fold down the carrying handle. Press the catches, remove the hose and open the front cover.
7Lift out the insert holding the
8Pull the motor filter holder upwards until it comes away from the groove.
9Carefully pull the old, dirty filter out of the filter holder and replace it with a new motor filter.
10Reattach the filter holder containing the new motor filter.
11Replace the insert holding the
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag,
There are two types of exhaust filter:
•Hepa H12 (Ref. No. EFH12)
•Microfilter (Ref. No. EF17)
The filters must always be replaced with new ones and cannot be washed.*
12Fold up the carrying handle until it clicks into place.
13Place your thumbs on the back edge of the lid and then open the lid by pulling the handle backwards and upwards with your index/middle finger.
14Lift out the filter. Insert a new filter and replace the lid as shown.
*A washable filter – HEPA H13 – can be bought as an option.
7/18/07 4:32:48 PM