• | If necessary, wash the filter (13) in warm, soapy water as | I |
| shown in figure I. | |
|
| |
• | Make sure that the filter is dry before refitting it to the appliance. |
|
•Refit the pleated filter into the plastic
•Close the transparent door and make sure it clicks into place.
To replace the dust container
• With the filters installed slide the container back onto the base and rotate | 13 |
the handle toward the front of the appliance until an audible click is |
|
heard. Ensure that the container is fully fastened back onto the base. |
|
Cleaning the dust container (fig. J - L) | |
WARNING:Projectile/Respiratory Hazard: | |
Never use the appliance without the filters. | J |
Optimum dust collection will only be achieved | |
with clean filters. |
|
CAUTION: Do not turn |
|
appliance on when dust container is removed. |
|
• Push and hold the release bowl button
(5) on the nozzle.
•Rotate the nozzle toward the bottom of
| the appliance as shown in figure J. | K |
|
• Pull the dust container to the side, and |
| ||
| away from the base of the appliance. | 12 |
|
• | Pull the door latch (9) and open the |
| |
| transparent door (8). |
|
|
• | Remove the |
| 13 |
| (13) from the appliance by twisting the |
| |
| filter to the right and pulling it from the |
|
|
| appliance as shown in figure K. |
|
|
• Once filters are removed, wipe the dust |
|
| |
| container with a damp cloth, or rinse with |
|
|
| warm soapy water as shown in figure L |
|
|
| and allow to dry. | L |
|
To replace the dust container |
| ||
• With the filters installed, slide the |
|
| |
| container back onto the base and |
|
|
| rotate the handle toward the front of the | 10 |
|
| appliance until an audible click is heard. | 12 | |
| Ensure that the container is fully fastened |
| |
| back onto the base. |
|
|
Replacing the filter
The filter should be replaced every
6 to 9 months and whenever worn or damaged. A replacement filter is available
from your Black+Decker dealer (cat. no. PVF110):
•Remove the old filter as described above.
•Fit the new filter as described above.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse the main body of the appliance into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
6