Genie 4024H manual Potential Hazard, Prevention

Page 2

SAFETY INFORMATION

OVERVIEW OF POTENTIAL HAZARDS

READ THIS SAFETY INFORMATION

CONVENTIONS USED IN THESE INSTRUCTIONS

Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual. If you have questions or do not understand the information presented, call your nearest trained door system technician or visit our website.

The following Safety Alert symbol and signal words are used throughout this manual to call attention to and identify different levels of hazard and special instructions.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and the word "DANGER", "WARNING", or "CAUTION"

DANGER indicates an imminently hazardous situation which, if NOT avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if NOT avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if NOT avoided, may result in injury or property damage.

The word NOTE is used to indicate important steps to be followed or important considerations.

IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS

Potential Hazard

Effect

Prevention

 

WARNING

Keep people clear of opening while Door is moving.

 

 

 

Could result in

Do NOT allow children to play with the Door Opener.

 

 

 

Death or Serious

Do NOT operate a Door that jams or one that has a broken

 

Injury

spring.

WARNING

Turn OFF power before removing opener cover.

 

Could result in

When replacing cover, make sure wires are NOT pinched or

near moving parts.

Death or Serious

Injury

Opener must be fully grounded.

 

 

WARNING

Do NOT try to remove, install, repair or adjust springs or

anything to which door spring parts are fastened, such as,

 

Could result in

wood blocks, steel brackets, cables or other like items.

 

Death or Serious

Installations, repairs and adjustments must be done by

Injury

a trained door system technician using proper tools and

 

instructions.

2

©2010 The Genie Company

12/2010

Image 2
Contents Operation and Maintenance Manual Potential Hazard PreventionOpener Features Safety FeaturesTable of Contents Important Installation Instructions Infrared Protection FunctionProgramming Limits & Force Close Door Travel LimitDoor Limits are set Open Door Travel LimitSee long Blue LED flashing Both LEDs flash Blue Go OFFAdjustment TestIntelliCode 1 remotes Bring remotes to powerhead locationSee long Purple LED flashing See round Blue LED come onSee one Genie IntelliCode 1 wireless keypadGenie IntelliCode 1 remote See long Purple LED flashing + see both LEDs Flash PurpleReference Powerhead & Rail Assembled View Power Head Tête DE Puissance Cabeza DE LA EnergíaInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation Programming Buttons location Overview of Powerhead ControlsOn powerhead Overview Remotes and Options HoldIntellicode Features Maintenance & Troubleshooting Transmitter Compliance StatementSafe-T-Beam System Check Door balance Contact reverse Routine Monthly MaintenanceAdjustment Door Balance Spring TensionChange Light Bulbs Reset OPEN/CLOSE Travel LimitDoor Motion DETECTOR* OverviewOpen and closes door from inside garage Wire routingWall Console Overview Closed Unlock allows controls to work normallyBelt Chain or Belt Tension AdjustmentRemote Battery Replacement ChainPowerhead LEDs Round LED Long LED Adjustment Guide Speed SettingsChange Speed Setting Adjustment Guide Force Settings Change Force SettingTroubleshooting Guide Operation Powerhead LED Possible Problem Solution Reference Circuit Wiring Diagram Opening Cover May Cause Electric ShockLimited Warranty