Genie 4024H manual Open Door Travel Limit, See long Blue LED flashing, Door Limits are set

Page 7

©2010 The Genie Company

6

PRESS and

RELEASE

PR OGRAM

SET

 

SEE long Blue LED flashing

B) OPEN DOOR TRAVEL LIMIT

7 PRESS and HOLD until door is FULLY OPEN then RELEASE

M

 

 

RA

 

+

 

 

 

Watch door move

NOTE: You can start and stop door

movement using either buttons until door is in correct open or closed position.

8

PRESS and

RELEASE

PR OGRAM

SET

 

Door Limits are set.

Both LEDs flash Blue

and go OFF.

Continue with Step 9 SET FORCE.

12/2010

9SET FORCE Force is set automatically with first full CLOSE/OPEN door operation.

On Wall Console

PRESS and RELEASE

DOOR CLOSES

10

On Wall Console

PRESS and RELEASE

DOOR OPENS

NOTICE

Perform a successful CONTACT REVERSE TEST and then continue with remote programming.

NOTE: To reset LIMIT settings, repeat Steps 1-10.

7

Image 7
Contents Operation and Maintenance Manual Prevention Potential HazardSafety Features Opener FeaturesTable of Contents Infrared Protection Function Important Installation InstructionsClose Door Travel Limit Programming Limits & ForceBoth LEDs flash Blue Go OFF Open Door Travel LimitSee long Blue LED flashing Door Limits are setTest AdjustmentSee round Blue LED come on Bring remotes to powerhead locationSee long Purple LED flashing IntelliCode 1 remotesSee long Purple LED flashing + see both LEDs Flash Purple Genie IntelliCode 1 wireless keypadGenie IntelliCode 1 remote See onePower Head Tête DE Puissance Cabeza DE LA Energía Reference Powerhead & Rail Assembled ViewInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation On powerhead Overview of Powerhead ControlsProgramming Buttons location Hold Overview Remotes and OptionsIntellicode Features Transmitter Compliance Statement Maintenance & TroubleshootingDoor Balance Spring Tension Routine Monthly MaintenanceAdjustment Safe-T-Beam System Check Door balance Contact reverseMotion DETECTOR* Overview Reset OPEN/CLOSE Travel LimitDoor Change Light BulbsClosed Unlock allows controls to work normally Wire routingWall Console Overview Open and closes door from inside garageChain Chain or Belt Tension AdjustmentRemote Battery Replacement BeltChange Speed Setting Adjustment Guide Speed SettingsPowerhead LEDs Round LED Long LED Change Force Setting Adjustment Guide Force SettingsTroubleshooting Guide Operation Powerhead LED Possible Problem Solution Opening Cover May Cause Electric Shock Reference Circuit Wiring DiagramLimited Warranty