Genie 4024H manual See long Purple LED flashing, Bring remotes to powerhead location

Page 9

2 PROGRAM INTELLICODE® 2 REMOTE TO POWERHEAD

 

Bring remote(s) to powerhead location.

 

 

©2010

Begin with Step 1 and continue through Step 7 for each button to be programmed.

NOTE: The following instructions are for the remote(s) provided with this opener. This

The

remote is preset for use with the IntelliCode® 2 Access Security System. Refer to page

16 for additional information on IntelliCode® 1 and 2 remotes and how to switch from

Genie

IntelliCode® 2 to IntelliCode® 1. See page 10 for programming instructions using

IntelliCode® 1 remotes.

 

 

 

Company

1 PRESS and HOLD

2

3

RELEASE

 

 

 

 

PRESS and

FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, door opener could begin to run, so stay away from moving door and its parts.

4

PROGRAM

SET

+

 

RELEASE

PROGRAM

SET

+

 

PRESS and

RELEASE

SEE BOTH Blue LEDs come ON

SEE round Blue

LED come ON

SEE long Purple

LED flashing

SEE both LEDs flash Purple

12/2010

5

 

PRESS and

RELEASE

SEE both LEDs

flash Blue

6

SEE both LEDs OFF

7

PRESS and

RELEASE

The next press of the remote will operate door.

Repeat as necessary for other remotes.

Basic powerhead programming is complete. Your garage door opener is ready to use.

9

Image 9
Contents Operation and Maintenance Manual Prevention Potential HazardSafety Features Opener FeaturesTable of Contents Infrared Protection Function Important Installation InstructionsClose Door Travel Limit Programming Limits & ForceSee long Blue LED flashing Open Door Travel LimitDoor Limits are set Both LEDs flash Blue Go OFFTest AdjustmentSee long Purple LED flashing Bring remotes to powerhead locationIntelliCode 1 remotes See round Blue LED come onGenie IntelliCode 1 remote Genie IntelliCode 1 wireless keypadSee one See long Purple LED flashing + see both LEDs Flash PurplePower Head Tête DE Puissance Cabeza DE LA Energía Reference Powerhead & Rail Assembled ViewInstallation Typique SUR UNE Porte Sectionelle Typical ONE Piece Door Installation Overview of Powerhead Controls On powerheadProgramming Buttons location Hold Overview Remotes and OptionsIntellicode Features Transmitter Compliance Statement Maintenance & TroubleshootingAdjustment Routine Monthly MaintenanceSafe-T-Beam System Check Door balance Contact reverse Door Balance Spring TensionDoor Reset OPEN/CLOSE Travel LimitChange Light Bulbs Motion DETECTOR* OverviewWall Console Overview Wire routingOpen and closes door from inside garage Closed Unlock allows controls to work normallyRemote Battery Replacement Chain or Belt Tension AdjustmentBelt ChainAdjustment Guide Speed Settings Change Speed SettingPowerhead LEDs Round LED Long LED Change Force Setting Adjustment Guide Force SettingsTroubleshooting Guide Operation Powerhead LED Possible Problem Solution Opening Cover May Cause Electric Shock Reference Circuit Wiring DiagramLimited Warranty