Genie 3064H manual Test, Adjustment

Page 8

8

 

CONTACT REVERSE TEST

 

 

 

 

 

The Force and Limit settings on the previous page MUST be COMPLETED before Contact

 

Reverse testing.

 

1.Test.

 

 

• Open garage door using wall console.

©2010

 

– Place a 2" x 4" board (laid flat) under center of garage door opening.

 

• Close garage door using wall console.

The

 

• When door contacts board, the door must stop (within 2 seconds) and reverse direction

 

returning to open position.

Genie

2. Adjustment.

Company

 

• If the door:

 

– Stops before it contacts the 2 x 4 board, it may simply be responding to an improperly set

 

 

down limit. Return to pages 6-7 and repeat steps 1 through 10 to correct down limit.

 

 

– Stops after contacting the 2 x 4 board and does not reverse it may need an adjustment to

 

 

the down limit. Return to pages 6-7 and repeat steps 1 through 10 to correct down limit.

 

 

• Test again. Repeat as necessary until door reverses upon contacting board.

PRESS and RELEASE

2

3

12/2010

DOOR OPENS

WARNING

A moving door can cause serious injury or death.

1.Keep people clear of opening while door is moving.

2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.

3.During programming, door opener could begin to run, so stay away from moving door and its parts.

On Wall Console

1PRESS and RELEASE

4

Once the Contact Reverse Testing is complete continue with Programming Remotes on the next page.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operation and Maintenance Manual Potential Hazard PreventionOpener Features Safety FeaturesTable of Contents Important Installation Instructions Infrared Protection FunctionProgramming Limits & Force Press See long Blue LED flashingPress and Hold until door is Fully Open then Release Both LEDs flash Blue Go OFFAdjustment TestProgram Intellicode 2 Remote to Powerhead IntelliCode 1 remotesSee round Blue LED come on See both LEDs Flash Blue See both LEDs OFFGenie IntelliCode 1 wireless keypad Genie IntelliCode 1 remoteSee one See long Purple LED flashingReference Powerhead & Rail Assembled View Typical Sectional Door Installation Typical ONE Piece Door Installation Programming Buttons location Overview of Powerhead ControlsOn powerhead Overview Remotes and Options HoldPress both Simultaneously onIntellicode Features Use thisNew IntelliCode 2 openers 2010 IntelliCodeMaintenance & Troubleshooting Transmitter Compliance StatementRoutine Monthly Maintenance AdjustmentSafe-T-Beam System Check Door balance Contact reverse Door Balance Spring TensionDisconnect power to door opener Reset OPEN/CLOSE Travel LimitChange Light Bulbs Shuttle ENGAGE/DISENGAGEWire routing Wall Console OverviewOpen and closes door from inside garage Controls door opener lights from inside garageRemote Battery Replacement This area left blankPowerhead LEDs Round LED Long LED Adjustment Guide Speed SettingsChange Speed Setting Adjustment Guide Force Settings Change Force SettingDown Force settings within the available range Force Level LED indicator colorsTroubleshooting Guide Operation Powerhead LED Possible Problem Solution Disconnect power from opener prior to removing cover Opening Cover May Cause Electric ShockTrilo

3064H, 3064 specifications

The Genie 3064 and 3064H are renowned models in the realm of compact aerial work platforms. These versatile machines are designed for indoor and outdoor construction, maintenance, and industrial applications. Their compact design and advanced technologies make them suitable for tight spaces, while their impressive lift capabilities ensure productivity and safety.

One of the defining features of the Genie 3064 series is its impressive working height. The 3064 model can reach heights of up to 36 feet, enabling operators to perform tasks high above the ground safely and efficiently. The 3064H variant, with its hybrid technology, allows for seamless transitions between electric and diesel power, making it exceptionally versatile for various job sites. The hybrid engine ensures minimal emissions, which is particularly beneficial for indoor applications where air quality is a concern.

The Genie 3064 series boasts a maximum capacity of 500 pounds. This makes it ideal for tasks that require multiple workers, tools, and equipment. The platform's extension offers increased reach, allowing users to work on a wider area without the need to reposition the lift frequently. This feature enhances productivity and minimizes downtime, crucial factors in any construction or maintenance project.

Both models come equipped with Genie’s signature technology, the Smart Link Control System, which provides intuitive operation and helps reduce training time for new operators. The user-friendly interface integrates critical information, including platform height, load capacity, and battery levels, ensuring that operators have all necessary data at their fingertips.

The machines are built with durability in mind. High-grade steel and robust components ensure they can withstand the rigors of challenging job sites. The steel chassis provides stability while the non-marking tires protect floors in sensitive indoor environments.

Safety is a top priority with the Genie 3064/3064H series. Features like guardrails, emergency stop buttons, and a tilt sensor are standard, ensuring compliance with stringent safety regulations. The design allows for rapid deployment, reducing setup time and enhancing accessibility.

In summary, the Genie 3064 and 3064H aerial work platforms combine innovative technology, robust construction, and user-friendly features. Their versatility, safety measures, and exceptional performance make them a preferred choice for contractors, maintenance teams, and anyone needing reliable access solutions in various environments.
Top Page Image Contents