English / A-15

SQUEEGEE MAINTENANCE

If the squeegee leaves narrow streaks or water, the blades may be dirty or damaged. Remove the squeegee, rinse it under warm water and inspect the blades. Reverse or replace the blades if they are cut, torn, wavy or worn.

To Reverse or Replace the Rear Squeegee Wiping Blade...

1See Figure 3. Raise the squeegee tool off the ﬂoor, then unsnap the Center Latch (A) on the squeegee tool.

2Remove the Tension Straps (B).

3Slip the rear blade off the alignment pins.

4The squeegee blade has 4 working edges. Turn the blade so a clean, undamaged edge points toward the front of the machine. Replace the blade if all 4 edges are nicked, torn or worn to a large radius.

5Install the blade, following the steps in reverse order and adjust the squeegee tilt.

To Reverse or Replace the Front Squeegee Blade...

1Raise the squeegee tool off the ﬂoor, then loosen the (2) Thumb Nuts (C) on top of the squeegee and remove the squeegee tool from the mount.

2Remove both rear Tension Straps ﬁrst.

3Remove all the wing nuts that hold the front blade in place, then remove tension strap and blade.

4The squeegee blade has 4 working edges. Turn the blade so a clean, undamaged edge points toward the front of the machine. Replace the blade if all 4 edges are nicked, torn or worn to a large radius.

5Install the blade, following the steps in reverse order and adjust the squeegee tilt.

SQUEEGEE ADJUSTMENT

There is just one squeegee tool adjustment possible, angle.

Adjusting the Squeegee Angle

Adjust the squeegee angle whenever a blade is reversed or replaced, or if the squeegee is not wiping the ﬂoor dry.

1Park the machine on a ﬂat, even surface and lower the squeegee. Then drive the machine forward enough to have the squeegee blades fold over to the rear.

2Loosen the Lock Wing Nut (D) (hand tightened). This secures the squeegee mount angle from easily vibrating out of adjustment.

3Turn the Adjustment Knob (E) to tilt the tool forward or backwards, until the rear squeegee wiping blade touches the ﬂoor evenly across its entire width.

4Re-tighten by hand the Lock Wing Nut (D).

FIGURE 3

CFRONT

FORM NO. 56041554 - Advenger™, Advenger™ AXP / BR 600S series - A-15

BR 600S Series specifications

The Nilfisk-Advance America BR 600S Series is a remarkable line of ride-on scrubber-dryers designed to enhance cleaning efficiency in a variety of commercial settings. This series combines user-friendly operation with advanced technology to deliver superior cleaning performance for medium to large areas such as warehouses, retail spaces, and industrial facilities.

One of the most prominent features of the BR 600S Series is its innovative scrubbing system. The scrubber utilizes a dual brush design that efficiently covers larger surface areas, providing thorough cleaning and a consistent finish. The machine’s adjustable brush pressure allows operators to customize the scrubbing intensity based on the specific type of flooring, ensuring optimal results whether cleaning hard surfaces or more delicate materials.

Equipped with advanced water management technology, the BR 600S Series optimizes water usage while maintaining effective cleaning. The machine features a unique solution control system that ensures the right amount of water and cleaning solution is applied at all times. This not only reduces water consumption but also minimizes detergent waste, making the machine environmentally friendly and cost-effective.

The BR 600S Series is powered by a high-performance battery system, providing extended runtimes and reducing the need for frequent recharging. The inclusion of an onboard charger simplifies operation, allowing for quick and convenient charging between cleaning tasks. This makes the BR 600S ideal for busy environments that require minimal downtime.

Safety and comfort are paramount in the design of the BR 600S. The spacious operator compartment is ergonomically designed for ease of use, featuring intuitive controls that get operators up and running quickly. The low noise level of the machine also ensures that cleaning can take place during business hours without disrupting operations.

In addition to its performance features, the BR 600S Series emphasizes reliability and durability. Built with high-quality materials, these scrubbers are designed to withstand the rigors of daily use in challenging conditions, thus reducing maintenance costs and extending the lifespan of the machine.

Overall, the Nilfisk-Advance America BR 600S Series stands out in the market for its combination of advanced technology, enhanced cleaning efficiency, and user-friendly design, making it an ideal choice for facilities looking to elevate their cleaning operations.