GE Monogram GXSF18G installation instructions Optional Control Settings, Signals

Page 12
SALT
LEVEL

Installation Instructions

OPTIONAL CONTROL SETTINGS

The controller display has several options and features.

LOW SALT ALARM

 

SALT

 

 

 

 

 

 

LEVEL

 

 

The LOW SALT ALARM, when

 

 

 

 

 

 

 

 

 

 

enabled, will sound the beeper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

when the DAYS TO EMPTY value is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 days or less. To change this setting, press and hold the MODE button for 3 seconds. ON (factory default) or OFF will flash in the display. Press the UP or DOWN buttons to toggle this feature ON or OFF. Press the MODE button to accept, and the display will move to SALT EFFICIENCY.

SALT EFFICIENCY

SALT

 

LEVEL

SIGNALS

LOST TIME SIGNAL

If time is lost on the display due to power interruption, the blue indicator light will flash 4 times every second, until the present time of day is entered.

LOW SALT SIGNAL

When the DAYS TO EMPTY drops to 15, the blue indicator light and DAYS TO EMPTY in the display will flash every second and the alarm will beep every 30 seconds (from 8:00 AM to 8:00 PM), to notify the user that the unit is running low on salt. As soon as any button is pressed, the alarm will stop beeping. The blue indicator light and DAYS TO

When the SALT EFFICIENCY

feature is ON, the unit will operate at a salt efficiency of 4000 grains

E

EMPTY will continue to flash. Once salt is added to the brine tank and the SALT LEVEL is reset, the DAYS TO EMPTY will be reset.

of hardness removed per pound of salt. This mode of operation is the most efficient setting for salt usage, because the system will tend to recharge more often, with less salt usage. Turning the feature OFF will tend to lengthen the time between recharge cycles, which will provide the most efficient usage of water, but may use more salt. The degree of difference between these two cycles is highly dependent on the water usage and hardness

at a particular installation.

If you have very hard water, and you find your system is regenerating every 1–2 days, turn the SALT EFFICIENCY to OFF to lengthen the time between regenerations.

NOTE: California Regulations require this feature to be ON for installations in California.

To change the setting, press the UP or DOWN buttons to toggle the feature ON or OFF. Press the MODE button to accept. The display will move to

SYSTEM/ELECTRONIC DIAGNOSTICS.

SYSTEM/ELECTRONIC

LEVEL

 

SALT

DIAGNOSTICS

This display contains system diagnostics information to assist in troubleshooting problems with the system. See page 17 for details. Press the MODE button to return to the normal run display.

ERROR SIGNALS

If there is an error code detected, the blue indicator light will flash 4 times every second, the display will flash Err and the alarm will beep

every 30 seconds (from 8:00 AM to

8:00 PM) to signal that the softener requires service. The alarm can be turned off by pressing any button, but the blue indicator light and display will continue to flash.

See page 17 for information to assist in troubleshooting error codes. Once the problem is corrected, disconnect the transformer from the wall outlet momentarily, and plug it back in. The normal display will appear. The motor may run for several minutes, as the unit resets. If the problem is not corrected, the error code will reappear in 6 minutes.

BLUE INDICATOR LIGHT

Steady blue light indicates that the unit is working correctly. The light flashes when the unit needs attention from the user.

•Light flashes and DAYS TO EMPTY flashes—check salt level and add salt as required.

•Light flashes and Err is in the display—electrical problem with system—see page 17.

•Light will also flash when power to the unit has been interrupted. Check the PRESENT TIME setting.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Safety Information Care and Cleaning7289396 215C1173P027 49-5018207-06 JR Write the model and serial numbers here Model #Safety Precautions Before Beginning Installation Important Installation RecommendationsRead these instructions completely and carefully Where to Install the Softener Unpacking and InspectionTransit Plan HOW YOU will Install the Softener OUTInstall Bypass Valve Before YOU BeginAdapter Valve body Bypass valve Inlet or outletConnect and RUN the Valve Drain Hose Plumb in and OUT Pipes to and from SoftenerConnecting a Rigid Valve Drain Tube Drain Hose Tie or wire Hose in placeFittings On valve Valve 11⁄2″ air gapInstall Grounding Clamp ADD Water and Salt to the Brine TankWith salt Connect to Electrical Power Programming the ControlSET Present Time of DAY SET Water Hardness NumberSET Salt Level SET Recharge Starting TimeDays to Empty Optional Control Settings SignalsSanitizing Procedures SPECIFICATIONS/DIMENSIONS30″ 33⁄8″ Outlet Inlet 22.9″ 14.5″About the water softener system Cleaning the Nozzle and Venturi Assembly Breaking a Salt BridgeGe.com Feature Optional Recharge Controls Feature MemoryFeature/Service Automatic Electronic Diagnostics Normal Operation, Control DisplaysService Timer/Softener, Service Checkout Procedure To remove an error code 1. Unplug transformerERR Service Set Model Code Operation of DiagnosticsIf the water softening system does not draw brine, check Care and cleaning of the water softening system Cleaning Iron Out of the Water Softening SystemChecking the Salt Storage Level and Refilling However, you must keep the tank supplied with saltBefore you call for service… What To DoNo soft water Taken not plumbed to soft waterExcessive/high level Water in brine tankBrown/yellow colored Water after installation Salty tasting orBrown/yellow Colored water Resin beads showingPage Ge.com Page Parts list Parts list Parts catalog General Electric Parts CatalogSupport Screen What Is Not Covered For The Period We Will ReplaceWarrantor General Electric Company. Louisville, KY GE Water Softening System Warranty. For Customers in Canada For The Period Of We Will ReplaceWarrantor Mabe Canada INC One YearCómo limpiar la ensambladura De agua Cuidado y limpiezaDe averías Advertencia Advertencia No use con aguaRecomendaciones Importantes Para LA Instalación Lea estas instrucciones completa y cuidadosamenteDesempacado E Inspección Donde Instalar EL DescalcificadorHerramientas Y Materiales Necesarios Para LA Instalación Use la válvula de bypass incluida para instalarPlanifique LA Instalación DEL Descalcificador Ilustración DE Instalación NormalAntes DE Comenzar Instale LA Válvula DE BypassRemueva el tapón plástico de embalaje y el cable de la Retire el descalcificador del lugar de instalación Cerciórese de cumplir con los códigos localesSalmuera Y LA Manguera ContCómo Conectar UN Tubo DE Drenaje DE Válvula Rígida Instale LA Abrazadera DE Tierra Cierre todos los grifos de aguaConectar a LA Fuente Eléctrica Programación DEL ControlAjuste LA Hora DEL DÍA Hora actualAjuste EL Nivel DE SAL Días Hasta VacíoDe recarga De salAjustes Opcionales DE Control Eficiencia DE LA SALSeñals Procedimientos DE Desinfección En la fábrica se siguen los cuidados para mantenerNi infectarán su suministro de agua ni causarán que Sobre el sistema de descalcificación de agua Cómo romper un puente de sal Cómo limpiar la ensambladura de la boquilla y el Venturi Operación normal, Pantalla de control Función Controles opcionales de recargadoFunción Memoria Característica/Servicio Diagnóstico electrónico automáticoVisualizado Servicio Diagnóstico electrónico iniciado manualmente Vea la sección Programación del controlServicio Configurar el código del modelo Servicio Inspección manual del avance de la recargaCuidado y limpieza del sistema de descalcificación de agua Cuándo rellenar con sal Si una luz indicadoraAntes de llamar para solicitar servicio… Qué hacerVeces el agua Luz intermitente azul Notas Lista de partes Ge.com Catálogo de partes Catálogo DE Partes DE General ElectricPASADOR, Expansión Garantía GE para el Sistema de Descalcificación de Agua Por el período de ReemplazamosLo que no está cubierto Soporte al Consumidor Página Web de GE Appliances Solicite una reparaciónGarantías ampliadas Piezas y accesoriosSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

GXSF18G specifications

The GE Monogram GXSF18G is a premium side-by-side refrigerator that combines sophisticated design with cutting-edge technology. This model is designed to meet the needs of modern households, blending style, functionality, and energy efficiency. It stands out with its sleek stainless steel finish and a professional look that elevates any kitchen decor.

One of the primary features of the GE Monogram GXSF18G is its spacious interior. With an impressive capacity, this refrigerator offers ample storage options for all your food items. The adjustable shelves allow for customization of the space, accommodating tall bottles or large containers with ease. The clear drawers provide easy visibility, ensuring that you can quickly find what you need without rummaging through the fridge.

The GXSF18G includes advanced cooling technologies that help maintain optimal temperature and humidity levels for food preservation. Its dual climate control system ensures separate temperature zones for the refrigerator and freezer. This innovation not only keeps your food fresher for longer but also helps reduce energy consumption, thus improving efficiency.

Another standout feature is the energy-efficient LED lighting, which illuminates the interior while consuming less power than traditional bulbs. This feature enhances visibility, making it easier to see everything inside and find items quickly, even in low light conditions.

The water and ice dispensing system is also noteworthy. It provides easy access to clean drinking water and ice without opening the refrigerator door, minimizing temperature fluctuations and maintaining freshness. The water filtration system is designed to reduce contaminants, ensuring you have access to pure, refreshing water.

Furthermore, the GE Monogram GXSF18G is equipped with smart technology, allowing you to monitor and manage settings right from your smartphone. This tech-savvy feature offers convenience for busy individuals, making it simple to keep track of your refrigerator's performance and any alerts that may arise.

In conclusion, the GE Monogram GXSF18G is a top-tier refrigerator that combines style, efficiency, and advanced technology. With its spacious interior, innovative cooling solutions, energy-saving features, and smart connectivity, it is an excellent choice for those looking to enhance their kitchen with a premium appliance that doesn't compromise on performance or design. Investing in this refrigerator means investing in quality and convenience for your home.
Top Page Image Contents