Harman-Kardon AVR 147 owner manual Step Five Connect the Video Display, Hdmi 2 Source, Tape

Page 23

INSTALLATION

The AVR 147 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products.

If your source or video display is equipped with a DVI (Digital Video Interface) input, you may use an HDMI-to-DVI adapter (not included).

Remember to connect the output jacks on your recorder to the Tape or digital audio input jacks on the AVR, and the input jacks on your recorder to the Tape or digital audio output jacks on the AVR.

No video connections are needed.

Figure 24 – HDMI 1 and Coaxial 2 Inputs

HDMI 2 Source

The HDMI 2 source is used with a second device that is capable of outputting digital video through an HDMI connection, such as a DVD, HD-DVD or Blu-ray Disc player. The HDMI 2 source is not used with any of the 2-channel analog audio or video inputs on the AVR 147.

Since the AVR 147 is not capable of processing either the audio or video signal transmitted via the HDMI connection, you will need to connect the source’s optical digital audio output to the Optical 2 digital audio input on the AVR 147, or use the 6-/8-channel inputs. See Figure 25. You will also need to make sure your video display is HDMI-capable, and for many source devices, the display must be HDCP-compliant (High-Bandwidth Digital Content Protection) in order to display copy-protected materials.

If your source or video display is equipped with a DVI (Digital Video Interface) input, you may use an HDMI-to-DVI adapter (not included).

Figure 25 – HDMI 2 and Optical 2 Inputs

CD

The CD source is used for a strictly audio device, such as a CD player.

Referring to Table 2, connect your CD player to the CD Analog Audio inputs and to any available digital audio input. See Figure 26.

Figure 26 – CD Audio Inputs and Digital Audio Inputs

No video connections are needed.

Tape

The Tape source is used for audio-only recorders, such as a CDR, MiniDisc or cassette deck.

Referring to Table 2, connect your recorder to the Tape Analog Audio inputs and outputs, and to any available digital audio input (and corresponding digital audio output). See Figure 27.

TheBridgeTM

With Harman Kardon’s optional The Bridge, you can enjoy audio, video or still images stored on your iPod (not included), use your AVR 147 remote control to operate the iPod, and even charge the iPod while it’s docked in The Bridge.

Simply plug the proprietary cable from The Bridge into the special

The Bridge/DMP connector on the rear of the AVR 147. See Figure 28. Refer to the owner’s manual for The Bridge to select the appropriate insert to match your iPod.

Figure 28 – The Bridge/DMP Connector

Step Five – Connect the Video Display

Only video connections should be made between the receiver and your video display (TV), unless your TV is the source for your television programming (see Video 3 Source above).

You will need to make a video connection for each type of video used for your sources. In addition, even if you didn’t use S-video or composite video for any of your sources, one of these video monitor connections is required to view the AVR 147’s on-screen menus and displays.

First, determine what types of video your display is capable of handling. Remember that HDMI is preferred, followed by component video, S-video and then composite video. Ideally, this guided you in selecting the video connections for your sources.

Next, note which types of video connections you used for your source devices. Make sure you didn’t use a better type of video connection for a source than your video display can handle. If so, you will need to disconnect the source and use a video connection that’s compatible with your display.

If you used an HDMI video connection for any of your sources, then connect the HDMI Output on the AVR to an HDMI input on your video display. See Figure 29. As mentioned previously, you will need to make a separate digital audio connection from each source device to the AVR 147, and you will also need to consult the owner’s guide for your television to learn the proper procedure for disabling or muting the audio.

Figure 29 – HDMI Output

If you used component video for any sources, connect the Component Video Monitor outputs on the receiver to one set of component video inputs on your display. See Figure 30. Make a note of how these inputs are labeled on the display.

Figure 30 –

Component Video Monitor Outputs

23

Figure 27 – Tape Audio Inputs and Outputs, and Digital Audio Inputs and Outputs

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AVR Safety Information Important Safety Information Safety InformationStaple Invoice Here Table of Contents Surround Modes IntroductionThank you for choosing Harman Kardon Audio SectionDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays AVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSpeaker Connections Connecting Source Devices to the AVRConnections Types of ConnectionsAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsRS-232 Serial Port FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferVCR, DVR, PVR Video 1 SourceHdmi 1 Source Video 2 SourceVideo 3 Source No video connections are needed Step Five Connect the Video DisplayHdmi 2 Source TapeStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRAfter your desired setting appears Initial SetupUsing the On-Screen Menu System Configure the AVR 147 Using EzSet/EQPlug EzSet/EQ microphone into receiver EzSet/EQ Specifying a 7.1 System What EzSet/EQ DoesEzSet/EQ Completed Configure SourcesAudio input assigned to the source Tuner at this time› Button selects the sources in the reverse order You are now ready to begin enjoying your new receiver DMP Setting Menu ScreenTurning On the AVR Sleep TimerVolume Control OperationSource Selection HeadphonesMute Function Tone ControlsWe recommend that you connect this player as follows Audio Input SelectionVideo Input Selection Channel Direct InputsChannel Input Selector Using the TunerRecording XM Radio OperationTuning Down Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsDolby Surround Settings Passages to avoid disturbing others Default Modes0 or Dolby Digital EX played asDolby Digital 2.0 or Surround Mode Description Incoming Bitstream or SignalPanorama adjusts wraparound surround effect See belowAre available Logic Step One Determine Speaker Size Manual SetupStep Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Large settingSpeaker Crossover Menu Delay Adjust MenuMake sure all speakers have been connected correctly Step Four Setting Channel Output Levels ManuallyUsing the Remote Control With the Test Tone Using the Front-Panel or Remote Control Channel CommandUsing the Full-OSD Menu System SettingsTo dim the display Advanced Remote Control FunctionsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Resetting the RemoteProcessor Reset Troubleshooting Guide DTS AVR 147 Technical SpecificationsTable A3 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A2 Speaker/Channel Setting DefaultsTable A5 Speaker/Channel Setting Table A4 Source Input SettingTable A7 System Settings Table A6 Remote Control CodesRemote Control Function List Reference TV VID3 Remote Control Function ListFAV Aiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A15 Remote Control Product Codes CBL Table A13 Remote Control Product Codes SATTable A14 Remote Control Product Codes Tape Table A15 Table A16 Remote Control Product CodesPage
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents