Harman-Kardon AVR 147 owner manual Using TheBridgeTM, Tuning Down

Page 38

OPERATION

NOTES:

1.Analog audio signals are not converted to digital form, and digital audio signals are not converted to analog audio form. However, you may record a coaxial or optical digital audio source using either type of digital audio output.

2.Only PCM digital audio signals are available for recording. Proprietary formats such as Dolby Digital and DTS may not be recorded using the digital audio connections, although if the source is connected to the AVR using the analog audio connections, an analog recording may be made.

3.HDMI and Component video sources are not available for recording.

4.Please make certain that you are aware of any copyright restrictions on any material you record. Unauthorized duplica- tion of copyrighted materials is prohibited by federal law.

Using TheBridgeTM

The Bridge is an optional dock that may be used with a compatible iPod (not included). When The Bridge is connected to its proprietary input on the AVR 147 and the iPod is docked, you may enjoy the audio, video and still-image materials on your iPod through your high-quality audio/video system, operate the iPod using the AVR remote or the AVR’s front-panel controls, view navigation messages on the AVR’s front panel or a connected video display, and charge the iPod.

Either press the front-panel Source Selector repeatedly until the message “DMP/The Bridge is CONNECTED” scrolls across the front-panel and semi-OSD displays, or press the DMP Button on the remote to select The Bridge as the input source.

(Left) Figure 73 – Using The Bridge (Remote)

(Above) Figure 74 – Using The Bridge (Front Panel)

Table 5 summarizes the controls available when The Bridge is in use; see also Figures 73 and 74.

Table 5 – Using The Bridge

 

iPod Function

Remote Control Key

Front-Panel Button

 

 

 

 

 

 

 

Play

Play (›)

Tuner Mode

 

 

 

 

 

 

 

Pause

Pause (II)

Tuner Mode

 

 

 

 

 

 

 

Menu

Menu (Spkr)

Tuner Band (AM/FM)

 

 

 

 

 

 

 

Select

Set

Set

 

 

 

 

 

 

 

Scroll Forward

Left Arrow (‹)

Preset Down

 

 

 

 

 

 

 

Scroll Reverse

Right Arrow (›)

Preset Up

 

 

 

 

 

 

 

Forward Search/Next Track

Forward/Next (››)

Tuning Up

 

 

 

 

 

 

 

Reverse Search/Previous Track

Reverse/Previous (‹‹)

Tuning Down

 

 

 

 

 

 

NOTE: For the Search function, press and hold the indicated button. Pressing the Previous Track Button once skips to the beginning of the current track. Press the Previous Track Button twice to skip to the beginning of the previous track.

It is possible to activate Repeat (one track or one album/playlist) and Shuffle (songs or albums) modes using the DMP SETTING menu (see Figure 54). This menu may also be used to turn on the Resume feature, which resumes play of the current track from the point it was interrupted, or to enable charging while the AVR is in Standby mode.

NOTE: The Resume setting disables the Remember Playback Position setting that you may set for audio and video files using later versions of iTunes. Resume affects all files on the iPod until you manually change the setting either in the DMP SETTING menu or using iTunes.

Access the DMP SETTING menu by pressing OSD to display the MASTER MENU. Press the Set Button to display the INPUT SETUP menu. When DMP/The Bridge is selected as the current source, you may scroll down to the GO TO DMP SETTING line and press the Set Button to display the DMP SETTING menu. See the Initial Setup section for more information on using the DMP SETTING menu.

NOTES ON VIDEO PLAYBACK:

•Before attempting to play videos stored on your iPod, check the Video Settings menu on the iPod and make sure that the TV Out setting is set to On. The TV Signal setting should be NTSC to match the capabilities of your video display. Set Widescreen to On or Off, depending on the aspect ratio of your video display. If your selection was playing and paused at the time you changed the TV Out setting, the iPod may require you to navi- gate its menu system and reselect the video for the new TV Out setting to take effect. Resuming play from the Now Playing function may not reflect the change to the TV Out setting. This is a function of the iPod, not the AVR 147.

•In Video mode, the iPod’s menus will not be visible on your video display, although you may view them on the iPod’s screen. You may operate the iPod using the AVR remote, as long as it is in The Bridge device mode.

•You may view the AVR’s on-screen displays while The Bridge is in use, just as you would with any other video source.

•The MP4 and H.264 video formats often used for videos to be played on the iPod are intended for optimal performance on the iPod’s small screen. Playback on larger displays may have different results.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents AVR Safety Information Safety Information Important Safety InformationStaple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Surround ModesAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays Power On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioTypes of Connections Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas RS-232 Serial PortSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasVideo 1 Source VCR, DVR, PVRHdmi 1 Source Video 2 SourceVideo 3 Source Tape Step Five Connect the Video DisplayHdmi 2 Source No video connections are neededStep Six Plug in AC Power Step Seven Insert Batteries in RemoteTurn on your source device Enter a code from aboveStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRConfigure the AVR 147 Using EzSet/EQ Initial SetupUsing the On-Screen Menu System After your desired setting appearsPlug EzSet/EQ microphone into receiver What EzSet/EQ Does EzSet/EQ Specifying a 7.1 SystemConfigure Sources EzSet/EQ CompletedAudio input assigned to the source Tuner at this time› Button selects the sources in the reverse order DMP Setting Menu Screen You are now ready to begin enjoying your new receiverOperation Sleep TimerVolume Control Turning On the AVRTone Controls HeadphonesMute Function Source SelectionChannel Direct Inputs Audio Input SelectionVideo Input Selection We recommend that you connect this player as followsUsing the Tuner Channel Input SelectorXM Radio Operation RecordingUsing TheBridgeTM Tuning DownSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings Dolby Digital EX played as Default Modes0 or Passages to avoid disturbing othersSee below Surround Mode Description Incoming Bitstream or SignalPanorama adjusts wraparound surround effect Dolby Digital 2.0 orAre available Logic Step Two Measure Speaker Distances Manual SetupStep Three Manual Setup Menu Step One Determine Speaker SizeLarge setting Speaker Size MenuDelay Adjust Menu Speaker Crossover MenuUsing the Front-Panel or Remote Control Channel Command Step Four Setting Channel Output Levels ManuallyUsing the Remote Control With the Test Tone Make sure all speakers have been connected correctlySystem Settings Using the Full-OSD MenuPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayResetting the Remote To program, or record a macro, follow these stepsProcessor Reset Troubleshooting Guide AVR 147 Technical Specifications DTSTable A2 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Setting Table A5 Speaker/Channel SettingTable A6 Remote Control Codes Table A7 System SettingsRemote Control Function List Reference Remote Control Function List TV VID3FAV Aiwa Table A9 Table A10Table A11 Remote Control Product Codes CD Table A12 Remote Control Product Codes DVDTable A15 Remote Control Product Codes CBL Table A13 Remote Control Product Codes SATTable A14 Remote Control Product Codes Tape Table A16 Remote Control Product Codes Table A15Page
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents