Harman-Kardon AVR 147 owner manual System Settings, Using the Full-OSD Menu

Page 49

ADVANCED FUNCTIONS

You may also access the Channel command by pressing the Channel Button on the remote. Use the ⁄/¤ Buttons to select the desired speaker channel and press the Set Button, then use the ⁄/¤ Buttons again to adjust the level. As with the front-panel controls, a source should be playing for best results. However, the source may be mixed to highlight certain channels at various times during the selection, which could skew the results when a different program is played.

C. Using the Full-OSD Menu

Next to EzSet/EQ, the full-OSD menu system offers the easiest and most flexible manner of setting output levels. Press the OSD Button to display the Master Menu, and then navigate to the MANUAL SETUP line. Press the Set Button to display the Manual Setup menu, and then navi- gate to the CHANNEL ADJUST line. Press the Set Button to display the Channel Adjust menu. See Figure 85.

When this setting reads MANUAL, the test tone will not move to the next channel until you use the ⁄/¤ Buttons to move it.

TEST TONE: This line determines whether the test tone is active. To begin the process of setting the levels, use the ‹/› Buttons to change the setting to ON. Any time you manually move the cursor out of the channel listings area of the screen, this setting will automatically change to OFF, stopping the test tone.

NOTE: Setting the channel levels while one surround mode is active does not necessarily carry over to all other modes. We recommend that after you have set the levels satisfactorily in one mode, you note the results and change to other surround modes. For those modes that don’t reflect your level settings, you may either copy the settings you obtained (as a short cut), or re-do the procedure to determine the correct settings for those surround modes.

System Settings

The AVR 147 offers several system settings that allow you to make the receiver easier to use rather than directly affecting performance. Most of these settings may be accessed from the SYSTEM SETUP menu, which is selected by pressing the OSD Button and navigating to the SYSTEM SETUP line of the MASTER MENU. Press the Set Button to display the submenu. See Figure 86.

Figure 85 – Channel Adjust Menu Screen

All of the speaker channels will appear at the top of the screen with their current level settings. Any channels that have not been programmed using the Speaker Size menu will display four dashes and will not be accessible. If you have selected a surround mode that does not utilize all speakers, such as Surround Off, you will see dashed lines next to the speakers that aren’t needed for that mode.

CHANNEL RESET: If you wish to start by resetting all of the levels to their factory defaults of 0dB, navigate to this line and change the setting to ON. The levels will be reset, and this setting will then revert to OFF.

If you are using an external source to set your output levels, simply navigate to each channel and use the ⁄/¤ Buttons to adjust the level as desired.

If you would like to set your levels using the AVR 147’s internal test tone, adjust the TEST TONE SEQ and TEST TONE lines as follows.

TEST TONE SEQ: When this setting reads AUTO, the test tone will automatically circulate to all channels, pausing for a few moments at each channel and then moving to the next channel several seconds later, as indicated by the blinking cursor. You may adjust the level for any channel when the test tone is paused there by using the ‹/› Buttons. You may also use the ⁄/¤ Buttons at any time to move the cursor to another line, and the test tone will follow the cursor.

Figure 86 – System Setup Menu Screen

VFD FADE TIME OUT: Some people find the brightness of the AVR’s front-panel display distracting during movies or listening sessions. It’s possible to dim the front-panel display completely using the Dim function (see below). This sets the display to remain dark most of the time, lighting up only when a button is pressed or a remote command is received, and going dark again 5 seconds after the last command. The VFD FADE TIME OUT feature also causes the display to light up only when a button is pressed or a change in the incoming signal is detected, but the display immediately begins to fade to dark. This setting allows you to program the length of the fade time.

Select a time-out period of between 3 and 10 seconds, or select OFF if you prefer to leave the displays on at all times or to use the Dim function.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents AVR Safety Information Important Safety Information Safety InformationStaple Invoice Here Table of Contents Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Video 3 Controls televisions and other video displays Remote Control FunctionsChannel Input Selector Press this button to select AVR Selector Power OnRemote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Connections Speaker ConnectionsDigital Audio Audio ConnectionsVideo Connections Analog AudioAntennas FM antenna uses a 75-ohm F-connector. See FigureAnalog Video RS-232 Serial PortSpeaker Placement Step One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasVCR, DVR, PVR Video 1 SourceVideo 3 Source Video 2 SourceHdmi 1 Source Hdmi 2 Source Step Five Connect the Video DisplayTape No video connections are neededStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRUsing the On-Screen Menu System Initial SetupConfigure the AVR 147 Using EzSet/EQ After your desired setting appearsPlug EzSet/EQ microphone into receiver EzSet/EQ Specifying a 7.1 System What EzSet/EQ DoesEzSet/EQ Completed Configure Sources› Button selects the sources in the reverse order Tuner at this timeAudio input assigned to the source You are now ready to begin enjoying your new receiver DMP Setting Menu ScreenVolume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionVideo Input Selection Audio Input SelectionChannel Direct Inputs We recommend that you connect this player as followsChannel Input Selector Using the TunerRecording XM Radio OperationTuning Down Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings 0 or Default ModesDolby Digital EX played as Passages to avoid disturbing othersPanorama adjusts wraparound surround effect Surround Mode Description Incoming Bitstream or SignalSee below Dolby Digital 2.0 orAre available Logic Step Three Manual Setup Menu Manual SetupStep Two Measure Speaker Distances Step One Determine Speaker SizeSpeaker Size Menu Large settingSpeaker Crossover Menu Delay Adjust MenuUsing the Remote Control With the Test Tone Step Four Setting Channel Output Levels ManuallyUsing the Front-Panel or Remote Control Channel Command Make sure all speakers have been connected correctlyUsing the Full-OSD Menu System SettingsDim Function Advanced Remote Control FunctionsPunch-Through Programming To dim the displayTo program, or record a macro, follow these steps Resetting the RemoteProcessor Reset Troubleshooting Guide DTS AVR 147 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Setting Table A4 Source Input SettingTable A7 System Settings Table A6 Remote Control CodesRemote Control Function List Reference TV VID3 Remote Control Function ListFAV Aiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A14 Remote Control Product Codes Tape Table A13 Remote Control Product Codes SATTable A15 Remote Control Product Codes CBL Table A15 Table A16 Remote Control Product CodesPage
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents