Harman-Kardon AVR 147 Introduction, Thank you for choosing Harman Kardon, Audio Section

Page 6

INTRODUCTION

Please register your AVR 147 on our Web site at www.harmankardon.com.

Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions.

WWW.HARMANKARDON.COM

Thank you for choosing Harman Kardon®!

In the years since Harman Kardon invented the high-fidelity receiver, we have taken to heart the philosophy of bringing the joy of home entertainment to as many people as possible, adding performance and ease-of-use features that enhance the home entertainment experience. In the years since our first single-channel component was introduced, Harman Kardon has offered a number of receiver models, each an improvement upon its predecessors, leading to the AVR 147, a

5.1-channel digital audio/video receiver that offers a wealth of listening and viewing options, all in an elegant package.

AVR 147 5.1-Channel Audio/Video Receiver

Audio Section

•40 Watts x 5, five channels driven at full power at 8 ohms,

20Hz – 20kHz, <0.07% THD, (surround modes); 200 watts total

•50 Watts x 2, two channels driven at full power at 8 ohms,

20Hz – 20kHz, <0.07% THD, (surround off mode); 100 watts total

•High current capability, ultrawide bandwidth amplifier design with low negative feedback

•All-discrete amplifier circuitry

•Dual independent power supplies, for front and surround channels

•Triple crossover bass management

•24-Bit, twin-core Cirrus Logic® CS 49510 DSP processor with 32-bit post processor

•192kHz/24-bit D/A conversion

•Sampling upconversion to 96kHz

To obtain the maximum enjoyment from your new receiver, we urge you to read this manual and refer back to it as you become more familiar with its features and their operation.

If you have any questions about this product, its installation or its operation, please contact your retailer or customer installer, or visit our Web site at www.harmankardon.com.

Surround Modes

•Dolby® Digital

•Dolby Pro Logic® II (Movie, Music and Game)

•Dolby Virtual Speaker Version 2 (Reference 2- or 3-speaker; Wide 2-, 3-, 4- or 5-speaker)

•Dolby Headphone Version 2

•DTS® (5.1; DTS Stereo)

•DTS 96/24™ (DTS Stereo)

•DTS Neo:6® (Cinema 3- or 5-channel; Music 5-channel)

•Logic 7® (Cinema, Music and Enhance)

•Hall 1 and Hall 2

•Theater

•5-Channel Stereo

•Surround Off (DSP or Analog Bypass)

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AVR Safety Information Safety Information Important Safety InformationStaple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Surround ModesAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Remote Control Functions Video 3 Controls televisions and other video displaysChannel Input Selector Press this button to select Power On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioTypes of Connections Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas RS-232 Serial PortSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasVideo 1 Source VCR, DVR, PVRVideo 2 Source Video 3 SourceHdmi 1 Source Tape Step Five Connect the Video DisplayHdmi 2 Source No video connections are neededStep Six Plug in AC Power Step Seven Insert Batteries in RemoteTurn on your source device Enter a code from aboveStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRConfigure the AVR 147 Using EzSet/EQ Initial SetupUsing the On-Screen Menu System After your desired setting appearsPlug EzSet/EQ microphone into receiver What EzSet/EQ Does EzSet/EQ Specifying a 7.1 SystemConfigure Sources EzSet/EQ CompletedTuner at this time › Button selects the sources in the reverse orderAudio input assigned to the source DMP Setting Menu Screen You are now ready to begin enjoying your new receiverOperation Sleep TimerVolume Control Turning On the AVRTone Controls HeadphonesMute Function Source SelectionChannel Direct Inputs Audio Input SelectionVideo Input Selection We recommend that you connect this player as followsUsing the Tuner Channel Input SelectorXM Radio Operation RecordingUsing TheBridgeTM Tuning DownSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings Dolby Digital EX played as Default Modes0 or Passages to avoid disturbing othersSee below Surround Mode Description Incoming Bitstream or SignalPanorama adjusts wraparound surround effect Dolby Digital 2.0 orAre available Logic Step Two Measure Speaker Distances Manual SetupStep Three Manual Setup Menu Step One Determine Speaker SizeLarge setting Speaker Size MenuDelay Adjust Menu Speaker Crossover MenuUsing the Front-Panel or Remote Control Channel Command Step Four Setting Channel Output Levels ManuallyUsing the Remote Control With the Test Tone Make sure all speakers have been connected correctlySystem Settings Using the Full-OSD MenuPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayResetting the Remote To program, or record a macro, follow these stepsProcessor Reset Troubleshooting Guide AVR 147 Technical Specifications DTSTable A2 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Setting Table A5 Speaker/Channel SettingTable A6 Remote Control Codes Table A7 System SettingsRemote Control Function List Reference Remote Control Function List TV VID3FAV Aiwa Table A9 Table A10Table A11 Remote Control Product Codes CD Table A12 Remote Control Product Codes DVDTable A13 Remote Control Product Codes SAT Table A14 Remote Control Product Codes TapeTable A15 Remote Control Product Codes CBL Table A16 Remote Control Product Codes Table A15Page
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents