Harman-Kardon AVR 147 owner manual You are now ready to begin enjoying your new receiver

Page 32

INITIAL SETUP

The remaining lines in the Input Setup menu activate the tone controls, and may be skipped at this time. We recommend leaving the tone controls at their factory defaults for most listening, in order to enjoy the sound mix created by your favorite movie and music artists. However, if your room or speakers have unusual characteristics, or simply as

a matter of personal preference, see the Tone Controls section on page 34 for more information.

You are now ready to begin enjoying your new receiver!

Figure 54 – DMP Setting Menu Screen

MODE: The first line of the DMP SETTING menu allows you to select whether the iPod will be used to listen to music (or other audio materials), or view videos or still images, if you have a video or photo iPod.

REPEAT: Set REPEAT to ONE, ALL or OFF to repeat one track, all tracks in an album or playlist, or not to repeat any tracks.

SHUFFLE: Set SHUFFLE to SONGS to play all songs on the iPod in random order. The ALBUMS setting plays all albums in random order, with each album’s tracks played in album order.

RESUME: Set RESUME to ON to resume playback of a track from the point where it was interrupted by turning off the AVR, switching sources on the AVR, or removing the iPod from The Bridge. Set RESUME to OFF if you wish to restart play from the beginning of the track after interruptions.

NOTE: The Resume setting disables the Remember Playback Position setting that you may set for audio and video files using later versions of iTunes. Resume affects all files on the iPod until you manually change the setting either in the DMP SETTING menu or by using iTunes.

CHARGE IN ST-BY: Your iPod battery may be charged while it is docked in The Bridge with the AVR turned on. Set CHARGE IN ST-BY to ON to enable charging even when the AVR is in Standby mode (but not com- pletely off). When CHARGE IN ST-BY is set to OFF, the iPod will charge only when the AVR is turned on.

NOTE: To access the DMP SETTING menu, press the AVR Selector on the remote so that it operates the AVR 147. You may then press the OSD Button and use the Navigation and Set Buttons, as usual, with the on-screen menu system. When you are ready to return to operation of your iPod using the remote, remember to press the DMP/The Bridge Selector so that the transport and other controls operate The Bridge.

To simplify use, you may wish to program two macros on your remote, one to select the AVR and issue the commands within the OSD system to display the DMP SETTING menu, and a sec- ond macro to remove the menu from the display and return the remote to operation of The Bridge. See the Macros section of the Advanced Functions section of this manual for more information on programming macros.

32

Image 32
Contents AVR Safety Information Safety Information Important Safety InformationStaple Invoice Here Table of Contents Introduction Thank you for choosing Harman KardonAudio Section Surround ModesSupplied Accessories Audio InputsAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Channel Input Selector Press this button to select Remote Control FunctionsVideo 3 Controls televisions and other video displays Power On AVR SelectorRemote Control Functions Introduction to Home Theater Surround ModesTypical Home Theater System Multichannel AudioConnecting Source Devices to the AVR ConnectionsTypes of Connections Speaker ConnectionsAudio Connections Digital AudioVideo Connections Analog AudioFM antenna uses a 75-ohm F-connector. See Figure AntennasAnalog Video RS-232 Serial PortSpeaker Placement Installation Step One Connect the SpeakersStep Two Connect the Subwoofer Step Three Connect the AntennasVideo 1 Source VCR, DVR, PVRHdmi 1 Source Video 2 SourceVideo 3 Source Step Five Connect the Video Display Hdmi 2 SourceTape No video connections are neededStep Six Plug in AC Power Step Seven Insert Batteries in RemoteTurn on your source device Enter a code from aboveStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRInitial Setup Using the On-Screen Menu SystemConfigure the AVR 147 Using EzSet/EQ After your desired setting appearsPlug EzSet/EQ microphone into receiver What EzSet/EQ Does EzSet/EQ Specifying a 7.1 SystemConfigure Sources EzSet/EQ CompletedAudio input assigned to the source Tuner at this time› Button selects the sources in the reverse order DMP Setting Menu Screen You are now ready to begin enjoying your new receiverSleep Timer Volume ControlOperation Turning On the AVRHeadphones Mute FunctionTone Controls Source SelectionAudio Input Selection Video Input SelectionChannel Direct Inputs We recommend that you connect this player as followsUsing the Tuner Channel Input SelectorXM Radio Operation RecordingUsing TheBridgeTM Tuning DownSelecting a Surround Mode Select a Surround Mode RemoteAnalog Audio Signals Digital Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings Default Modes 0 orDolby Digital EX played as Passages to avoid disturbing othersSurround Mode Description Incoming Bitstream or Signal Panorama adjusts wraparound surround effectSee below Dolby Digital 2.0 orAre available Logic Manual Setup Step Three Manual Setup MenuStep Two Measure Speaker Distances Step One Determine Speaker SizeLarge setting Speaker Size MenuDelay Adjust Menu Speaker Crossover MenuStep Four Setting Channel Output Levels Manually Using the Remote Control With the Test ToneUsing the Front-Panel or Remote Control Channel Command Make sure all speakers have been connected correctlySystem Settings Using the Full-OSD MenuAdvanced Remote Control Functions Dim FunctionPunch-Through Programming To dim the displayResetting the Remote To program, or record a macro, follow these stepsProcessor Reset Troubleshooting Guide AVR 147 Technical Specifications DTSAppendix Default settings, worksheets, remote product codes Table A1 Source Input Setting DefaultsTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Setting Table A5 Speaker/Channel SettingTable A6 Remote Control Codes Table A7 System SettingsRemote Control Function List Reference Remote Control Function List TV VID3FAV Aiwa Table A9 Table A10Table A11 Remote Control Product Codes CD Table A12 Remote Control Product Codes DVDTable A15 Remote Control Product Codes CBL Table A13 Remote Control Product Codes SATTable A14 Remote Control Product Codes Tape Table A16 Remote Control Product Codes Table A15Page
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.