Harman-Kardon AVR 147 owner manual Operation, Turning On the AVR, Sleep Timer, Volume Control

Page 33

Now that you have installed your system components and completed at least a basic configuration of your receiver, you are ready to begin enjoying your home theater system.

OPERATION

the Master Power Switch. When the Master Power Switch is turned off, any settings you have programmed, including system configuration and preset radio stations, will be preserved for up to four weeks.

Turning On the AVR 147

Gently press the Master Power Switch until the word OFF is no longer visible. The Power Indicator above the two power switches should light up in amber. This indicates that the AVR is in Standby mode and is ready to be turned on. Normally, you may leave the Master Power Switch in the ON position, even when the receiver is not being used. See Figure 55.

Figure 55 – Power Switches

There are several ways in which the AVR 147 may be turned on:

a)Press the Standby/On Switch on the front panel. See Figure 55.

b)Press the Source Select Button on the front panel. See Figure 56.

Figure 56 – Source Select Button

c)Using the remote, press any one of these buttons: AVR, DVD/CD, TAPE/The Bridge, HDMI 1/HDMI 2, VID1, VID2, VID3, XM, AM/FM or 6CH. See Figure 57.

Figure 57 – AVR and Input Selectors

NOTE: Any time you press one of the remote’s Input Selectors (i.e., DVD/CD, TAPE/The Bridge, HDMI 1/HDMI 2, VID1, VID2 or VID3), the remote will switch modes so that it will only transmit the codes programmed to operate that device. In order to con- trol the receiver, you will need to press the AVR Button to return the remote to AVR mode.

To turn the receiver off, press either the Standby/On Switch on the

front panel, or press the AVR Button and the OFF Button on the remote. Unless the receiver will not be used for an extended period of time (for example, if you will be on vacation), it is not necessary to turn off

Sleep Timer

You may program the AVR to play for up to 90 minutes and then turn off automatically using the sleep timer.

Press the Sleep Button on the remote, and the time until turn-off will be displayed. See Figure 58. Each additional press of the Sleep Button will reduce the time until turn-off by 10 minutes, until the OFF setting is reached, which disables the sleep timer.

Figure 58 – Sleep Button

When the sleep timer has been set, the front-panel display will automati- cally dim to half-brightness. If you press any button on the remote or front panel, the display will return to full-brightness. The display will dim again several seconds after your last command.

If you press the Sleep Button after the timer has been set, the remaining time until turn-off will be displayed. You may press the Sleep Button to change the time until turn-off. Pressing and holding the Sleep Button will disable the sleep timer, and the SLEEP OFF message will appear.

Volume Control

The volume may be adjusted either by turning the knob on the front panel (clockwise to increase volume or counterclockwise to decrease volume), or by pressing the Volume Control Buttons on the remote. See Figure 59. The volume is displayed as a negative number of decibels (dB) below the 0dB reference point, and may be changed in 0.5dB increments.

Unlike the volume controls on some other products, 0dB is the maximum volume for the AVR 147. Although it’s physically possible to turn the volume to a higher level, doing so may damage your hearing and your speakers. For certain more dynamic audio materials, even 0dB may be too high, allowing for damage to equipment.

Figure 59 – Volume Controls

The AVR 147 is designed to reproduce audio with a minimum amount of distortion, which may lead you to think that your hearing and the equipment can handle higher volumes. We urge caution with regard to volume levels.

33

Image 33
Contents AVR Safety Information Important Safety Information Safety InformationStaple Invoice Here Table of Contents Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Remote Control Functions Video 3 Controls televisions and other video displaysChannel Input Selector Press this button to select AVR Selector Power OnRemote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRTypes of Connections Speaker ConnectionsDigital Audio Audio ConnectionsVideo Connections Analog AudioAntennas FM antenna uses a 75-ohm F-connector. See FigureAnalog Video RS-232 Serial PortSpeaker Placement Step One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasVCR, DVR, PVR Video 1 SourceVideo 2 Source Video 3 SourceHdmi 1 Source Hdmi 2 Source Step Five Connect the Video DisplayTape No video connections are neededStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRUsing the On-Screen Menu System Initial SetupConfigure the AVR 147 Using EzSet/EQ After your desired setting appearsPlug EzSet/EQ microphone into receiver EzSet/EQ Specifying a 7.1 System What EzSet/EQ DoesEzSet/EQ Completed Configure SourcesTuner at this time › Button selects the sources in the reverse orderAudio input assigned to the source You are now ready to begin enjoying your new receiver DMP Setting Menu ScreenVolume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionVideo Input Selection Audio Input SelectionChannel Direct Inputs We recommend that you connect this player as followsChannel Input Selector Using the TunerRecording XM Radio OperationTuning Down Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings 0 or Default ModesDolby Digital EX played as Passages to avoid disturbing othersPanorama adjusts wraparound surround effect Surround Mode Description Incoming Bitstream or SignalSee below Dolby Digital 2.0 orAre available Logic Step Three Manual Setup Menu Manual SetupStep Two Measure Speaker Distances Step One Determine Speaker SizeSpeaker Size Menu Large settingSpeaker Crossover Menu Delay Adjust MenuUsing the Remote Control With the Test Tone Step Four Setting Channel Output Levels ManuallyUsing the Front-Panel or Remote Control Channel Command Make sure all speakers have been connected correctlyUsing the Full-OSD Menu System SettingsDim Function Advanced Remote Control FunctionsPunch-Through Programming To dim the displayTo program, or record a macro, follow these steps Resetting the RemoteProcessor Reset Troubleshooting Guide DTS AVR 147 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Setting Table A4 Source Input SettingTable A7 System Settings Table A6 Remote Control CodesRemote Control Function List Reference TV VID3 Remote Control Function ListFAV Aiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A13 Remote Control Product Codes SAT Table A14 Remote Control Product Codes TapeTable A15 Remote Control Product Codes CBL Table A15 Table A16 Remote Control Product CodesPage
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.