Harman-Kardon owner manual AVR 147 Technical Specifications, Dts

Page 54

AVR 147 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

50 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

40 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side) channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic I/II

40dB

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

The AVR 147 is Simplay HD™-verified for compatibility via the HDMI connection with other Simplay HD-verified products.

AM Tuner Section

 

 

Frequency Range

520–1720kHz

 

Signal-to-Noise Ratio

45dB

 

Usable Sensitivity

Loop 500µV

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

10Hz–8MHz (–3dB)

 

(Composite and S-Video)

 

 

Video Frequency Response

10Hz–100MHz (–3dB)

 

(Component Video)

 

 

HDMI™

Switching

 

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

65W idle, 540W maximum

 

 

(5 channels driven)

 

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

22 inches (559mm)

Height

6-1/2 inches (165mm)

10-1/2 inches (266mm)

Depth

15 inches (382mm)

18-5/16 inches (465mm)

 

(Product)

(Shipping)

Weight

21.3 lb (9.7kg)

26.2 lb (11.9kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered

in the United States and/or other countries. Designed to Entertain, TheBridgeTM and EzSet/EQ are trademarks of Harman International Industries, Incorporated.

Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

“DTS” and “DTSIES Neo:6” are registered trademarks of DTS, Inc. “96/24” is a trademark of DTS, Inc.

Cirrus Logic is a registered trademark of Cirrus Logic, Inc.

SACD is a trademark of Sony Corporation.

Apple, iTunes and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Computer, Inc.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

TiVo is a registered trademark of TiVo Inc.

HDMI is a trademark of HDMI Licensing LLC.

XM and XM Ready are registered trademarks of XM Satellite Radio.

Audiovox is a registered trademark of Audiovox Corporation.

The Simplay HD logo and the Simplay, Simplay HD and Simplay Labs trademarks are owned by Silicon Image, Inc. and are used under license from Silicon Image, Inc. and/or Simplay Labs, LLC.

Please register your AVR 147 on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents AVR Safety Information Safety Information Important Safety InformationStaple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Surround ModesAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Remote Control Functions Video 3 Controls televisions and other video displaysChannel Input Selector Press this button to select Power On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioTypes of Connections Connecting Source Devices to the AVRConnections Speaker ConnectionsVideo Connections Audio ConnectionsDigital Audio Analog AudioAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas RS-232 Serial PortSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasVideo 1 Source VCR, DVR, PVRVideo 2 Source Video 3 SourceHdmi 1 Source Tape Step Five Connect the Video DisplayHdmi 2 Source No video connections are neededStep Six Plug in AC Power Step Seven Insert Batteries in RemoteTurn on your source device Enter a code from aboveStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRConfigure the AVR 147 Using EzSet/EQ Initial SetupUsing the On-Screen Menu System After your desired setting appearsPlug EzSet/EQ microphone into receiver What EzSet/EQ Does EzSet/EQ Specifying a 7.1 SystemConfigure Sources EzSet/EQ CompletedTuner at this time › Button selects the sources in the reverse orderAudio input assigned to the source DMP Setting Menu Screen You are now ready to begin enjoying your new receiverOperation Sleep TimerVolume Control Turning On the AVRTone Controls HeadphonesMute Function Source SelectionChannel Direct Inputs Audio Input SelectionVideo Input Selection We recommend that you connect this player as followsUsing the Tuner Channel Input SelectorXM Radio Operation RecordingUsing TheBridgeTM Tuning DownSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundDolby Surround Settings Dolby Digital EX played as Default Modes0 or Passages to avoid disturbing othersSee below Surround Mode Description Incoming Bitstream or SignalPanorama adjusts wraparound surround effect Dolby Digital 2.0 orAre available Logic Step Two Measure Speaker Distances Manual SetupStep Three Manual Setup Menu Step One Determine Speaker SizeLarge setting Speaker Size MenuDelay Adjust Menu Speaker Crossover MenuUsing the Front-Panel or Remote Control Channel Command Step Four Setting Channel Output Levels ManuallyUsing the Remote Control With the Test Tone Make sure all speakers have been connected correctlySystem Settings Using the Full-OSD MenuPunch-Through Programming Advanced Remote Control FunctionsDim Function To dim the displayResetting the Remote To program, or record a macro, follow these stepsProcessor Reset Troubleshooting Guide AVR 147 Technical Specifications DTSTable A2 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Setting Table A5 Speaker/Channel SettingTable A6 Remote Control Codes Table A7 System SettingsRemote Control Function List Reference Remote Control Function List TV VID3FAV Aiwa Table A9 Table A10Table A11 Remote Control Product Codes CD Table A12 Remote Control Product Codes DVDTable A13 Remote Control Product Codes SAT Table A14 Remote Control Product Codes TapeTable A15 Remote Control Product Codes CBL Table A16 Remote Control Product Codes Table A15Page
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents