Harman-Kardon AVR 147 owner manual Initial Setup, Using the On-Screen Menu System

Page 27

Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 147 to match your actual system.

Make sure that you have connected a video display to either the S-video or composite video monitor output on the receiver. When you turn on your display and the AVR, you should see a blue screen. A message may appear briefly at the bottom of the screen. This message is part of the on-screen display system, and is referred to as the “semi-OSD”. The semi-OSD is activated any time you send a command to the AVR, and any time the AVR detects a change in the incoming signal. Semi-OSD messages are overlaid on top of any video signal, so that you may continue to watch your program while making adjustments to the AVR.

Although it’s possible to configure the AVR using only the remote and the semi-OSD messages, we recommend that you use the full-screen menu system, known as the “full-OSD”.

Using the On-Screen Menu System

The full-OSD system is accessed by pressing the OSD Button on the remote. See Figure 38. While the full-OSD system is in use, it isn’t possible to see any video programming. In addition, an OSD ON message will appear on the front panel of the receiver to remind you to use a video display.

Figure 38 – Navigation Buttons

The Master Menu will always be displayed when you first press the OSD Button. Use the ¤ Buttons on the remote to point the cursor to different lines in the menu. Press the Set Button on the remote to select a line that has no setting to be adjusted, such as one of the sub- menus listed in the Master Menu, or a line that returns you to a previous menu. Within the submenus, after you have positioned the cursor at a particular line item, use the /Buttons on the remote to change

a setting. When the desired setting appears, use the ¤ Buttons to navigate to another line item. Except for the TITLE setting in the INPUT SETUP menu, there is no need to press the Set Button

after your desired setting appears.

NOTE: The /and Set Buttons on the front panel have no effect on the OSD system.

INITIAL SETUP

The Master Menu allows access to five submenus: Input Setup, Surround Select, EzSet/EQ, Manual Setup and System Setup. See Figure 39.

Figure 39 – Master Menu Screen

If you are an experienced home theater user, you may prefer to use the menus in this order:

1.System Setup (described in Advanced Functions section)

2.EzSet/EQ (described in this section)

3.Manual Setup (described here and in Advanced Functions)

4.Input Setup (described in this section)

5.Surround Select (see Advanced Functions section)

We recommend that most users follow the instructions in this INITIAL SETUP section to configure a basic home theater system. You may return to these menus at any time to make additional adjustments.

This section requires that you complete all of the steps in the Installation section that apply to your receiver. You should have connected all of your loudspeakers and a video display, as well as your source devices. You should be able to turn on the receiver and view a blue screen on your video display. If necessary, reread the Installation Section before continuing.

Configure the AVR 147 Using EzSet/EQ

One of the most important and perhaps often overlooked aspects of setting up a home theater system is calibrating the receiver to match the loudspeakers, which enables the AVR to perform at its best.

Until recently, most receivers required the user to perform the calibration and configuration manually, a somewhat tedious process that called for a good ear or the purchase of an SPL (sound-pressure level) meter. Although you may configure the AVR 147 manually, as described in the Advanced Features section, we recommend that most users take advantage of our signature EzSet/EQ system.

27

Image 27
Contents AVR Safety Information Important Safety Information Safety InformationStaple Invoice Here Table of Contents Surround Modes IntroductionThank you for choosing Harman Kardon Audio SectionDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Navigation Adjust Input Indicators REAR-PANEL Connections DVD A/V Remote Control Functions Video 3 Controls televisions and other video displaysChannel Input Selector Press this button to select AVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSpeaker Connections Connecting Source Devices to the AVRConnections Types of ConnectionsAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsRS-232 Serial Port FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferVCR, DVR, PVR Video 1 SourceVideo 2 Source Video 3 SourceHdmi 1 Source No video connections are needed Step Five Connect the Video DisplayHdmi 2 Source TapeStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRAfter your desired setting appears Initial SetupUsing the On-Screen Menu System Configure the AVR 147 Using EzSet/EQPlug EzSet/EQ microphone into receiver EzSet/EQ Specifying a 7.1 System What EzSet/EQ DoesEzSet/EQ Completed Configure SourcesTuner at this time › Button selects the sources in the reverse orderAudio input assigned to the source You are now ready to begin enjoying your new receiver DMP Setting Menu ScreenTurning On the AVR Sleep TimerVolume Control OperationSource Selection HeadphonesMute Function Tone ControlsWe recommend that you connect this player as follows Audio Input SelectionVideo Input Selection Channel Direct InputsChannel Input Selector Using the TunerRecording XM Radio OperationTuning Down Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsDolby Surround Settings Passages to avoid disturbing others Default Modes0 or Dolby Digital EX played asDolby Digital 2.0 or Surround Mode Description Incoming Bitstream or SignalPanorama adjusts wraparound surround effect See belowAre available Logic Step One Determine Speaker Size Manual SetupStep Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Large settingSpeaker Crossover Menu Delay Adjust MenuMake sure all speakers have been connected correctly Step Four Setting Channel Output Levels ManuallyUsing the Remote Control With the Test Tone Using the Front-Panel or Remote Control Channel CommandUsing the Full-OSD Menu System SettingsTo dim the display Advanced Remote Control FunctionsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Resetting the RemoteProcessor Reset Troubleshooting Guide DTS AVR 147 Technical SpecificationsTable A3 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A2 Speaker/Channel Setting DefaultsTable A5 Speaker/Channel Setting Table A4 Source Input SettingTable A7 System Settings Table A6 Remote Control CodesRemote Control Function List Reference TV VID3 Remote Control Function ListFAV Aiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A13 Remote Control Product Codes SAT Table A14 Remote Control Product Codes TapeTable A15 Remote Control Product Codes CBL Table A15 Table A16 Remote Control Product CodesPage
Related manuals
Manual 52 pages 60.25 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.