Brother XL-3500 operation manual Feather Stitching Costura de plumas

Page 50

XL2600_US-Sp.book Page 49 Thursday, November 4, 2004 11:41 AM

You can use these stitches to join together seams and finish them in one operation. The Overlock Stitches are also useful for sewing stretch materials while the Arrowhead Stitch is ideal for sewing the edge of a blanket.

Con estos tipos de puntadas es posible unir costuras y terminarlas en una sola operación. Las puntadas overlock también resultan útiles para coser telas elásticas, mientras que la puntada de flecha es idónea para coser los bordes de una manta.

1Setstitch.the pattern selection dial to an overedge

Ajuste el selector de puntadas en la puntada de sobreorilla.

2Put the fabric under the presser foot so that the seamline (or arrowhead point) is approximately 3 mm (1/8 inch) to the left of the center of the presser foot. This stitch works best with a seam allowance of approximately 5 mm (3/16 inch) as this allows the right (zigzag) side of the stitch to overlock the cut edge of the fabric.

Ponga la tela debajo del pie prensatela de forma que la línea de costura (o punta de flecha) esté a unos 3 mm (1/8 pulg.) a la izquierda del centro del pie prensatela. Esta puntada tiene los mejores resultados con un margen de costura de unos 5 mm (3/16 pulg.), puesto que esto permite que el derecho (zig-zag) de la puntada quede por encima del borde de corte de la tela.

3If the seam allowance is wider than the stitch pattern, trim away any excess fabric after stitching.

Si el margen de costura tiene una anchura superior al dibujo de la puntada, corte y quite toda la tela sobrante después de la costura.

A finished Elastic Overlock Stitch is shown in the illustration below.

En la ilustración siguiente se muestra una puntada overlock elástica terminada.

Feather Stitching

Costura de plumas

3

Stitch Name

 

Length

Width

Pattern

[mm (inch)]

[mm (inch)]

Nombre de la

Dibujo

Longitud

Anchura

puntada

 

[mm (pulg.)]

[mm (pulg.)]

 

 

 

 

 

 

Feather Stitch

 

Fixed / Fixed

 

 

2.5 (3/32)

3-5

Puntada de

 

 

Fixed / Fixed

(1/8-3/16)

plumas

 

 

 

 

 

2.5 (3/32)

 

Use the Feather Stitch as a decorative top stitch when embroidering or when hemming blankets, tablecloths, or draperies.

La puntada de plumas puede emplearse como costura sobrepuesta decorativa para el bordado o para los dobladillos de mantas, manteles y paños.

1Set the pattern selection dial to the Feather Stitch. Ajuste el selector de puntadas en la puntada de plumas.

2Place the fabric right side up and sew 1 cm (3/8 inch) from the edge of the fabric.

Coloque la tela con el derecho hacia arriba y cosa 1 cm (3/8 pulg.) desde el borde de la tela.

3Trim close to the stitching. Corte cerca de la costura.

The stitch will prevent the fabric from unravelling. La costura impedirá que la tela se deshilache.

49

Image 50
Contents Manual de Instrucciones Important Safety Instructions Instrucciones Importantes DE Seguridad For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine LEA Estas Instrucciones Antes DE Utilizar LA Máquina Contents Using Attachments and Applications Enhebrado del hilo superior Control de longitud de puntada Costura elásticaDevanado de la bobina Enhebrado del hilo inferior Costura con aguja gemela Tensión del hiloUtilización del pie móvil Cambio de la bombilla Limpieza Solución de problemasFruncidos Zurcidos Aplicaciones Main Parts Permite subir y bajar la aguja de forma manual Esta pieza sostiene el carrete de hiloPara cortar los hilos, páselos por el cortador de hilo Accessories / Accesorios Optional Accessories / Accesorios opcionales Part Name Part Code OthersUsing Your Sewing Machine USO DE LA Máquina DE Coser Machine must be unplugged. For U.S.A. only Connecting Plugs Conexión de enchufesFoot Controller / Pedal Sólo para EE.UUParallel space / Espacio paralelo Checking the Needle Comprobación de la agujaReplacing the Needle Cambio de la aguja Presser foot lever / Palanca del pie prensatela Shank / Lengüeta Changing the Presser Foot Cambio del pie prensatelaPresser Foot / Pie prensatela Slide the flat bed attachment to the left to release it Using a Free-arm Style Uso del estilo de brazo libreFlat Bed Attachment Unidad de cama plana Flat bed attachment / Unidad de cama planaControls / Controles Pattern Selection Dial Selector de puntadasManual Stitches / 25 puntadasPattern / Dibujo Stitch Name StitchesFixed / Fija 3/16 Fixed / Fija3/16 3/32 Stitches Nombre de la puntada13/64 3/32 Stitches / 35 puntadas Selecting a Stretch Stitch Stitch Length Dial Control de longitud de puntadaStretch Stitching Costura elástica Selección de un tipo de puntada elásticaNumbers marked on the dial represent the stitch width Stitch Width Dial Control de anchura de puntadaReverse Sewing Lever Pulsador de retroceso Reverse sewing lever / Pulsador de retrocesoThreading the Machine / Enhebrado DE LA Máquina Winding the Bobbin / Devanado de la bobinaXL2600US-Sp.book Page 27 Thursday, November 4, 2004 1141 AM Pulg This model Other models Lower Threading Enhebrado del hilo inferiorActual size Tamaño real 11.5 mm Cover / Tapa Slide button / Deslizador Illustration Replace the cover so that the endCover as shown by the line Cutter / Cuchilla Upper Threading / Enhebrado del hilo superior Suba el pie prensatela con la palanca del pie prensatelaPutneedle.the thread behind the guide above Hook / Ganchillo Thread / Hilo This feature is only available on certain modelsApague la máquina y baje la palanca del pie prensatela XL2600US-Sp.book Page 35 Thursday, November 4, 2004 1141 AM 3Replace the bobbin cover Sewing with a Twin Needle Costura con aguja gemelaQuick-set Bobbin Threading Vuelva a colocar la tapa de la bobinaModels Equipped with a Needle Threader Attaching the Twin Needle Colocación de la aguja gemela1Thread the left needle Modelos equipados con un enhebrador de agujaUpper Tension is too Tight Thread Tension Tensión del hiloCorrect Tension / Tensión adecuada Upper Tension is too LooseMedida Aguja Fabric Type Thread Size of NeedleTipo de tela Hilo Medida de la XL2600US-Sp.book Page 40 Thursday, November 4, 2004 1141 AM Straight Stitching / Costura recta Pase el hilo superior por la punta del pie prensatela Changing Sewing Direction Cambio de la dirección de costuraMachine Para preparar la máquina para la siguiente Zigzag Stitching Costura en zig-zagFinishing Sewing Finalización de la costura Zig-zagEsta costura actúa como costura reforzada Satin Stitch / Puntada para saténCosa en el pliegue como se indica en la figura C Blind Hem Stitching Costura invisible para dobladilloSew on the fold as in Fig. C Elastic Stitching Costura elástica Adjust the thread tension so that it is tighter than normalShell Tuck Stitching Costura de concha 3/16Joining Fabric / Unión de trozos de tela Double Action Stitching Costura de doble acciónSewing Elastic / Costura de gomas Puntada de Patchworking Costura de patchworkOveredge Stitching Costura de sobreorilla 3/16Ajuste el selector de puntadas en la puntada de sobreorilla Feather Stitching Costura de plumas1Setstitch.the pattern selection dial to an overedge Puntada Decorative Stitching Costura decorativaZig-zag triple HojaXL2600US-Sp.book Page 51 Thursday, November 4, 2004 1141 AM Foot Making a Buttonhole Realización de un ojalLength Width Pattern OjalesZona cosida Dibujo Making a Buttonhole Realización de un ojal Step / PasoPattern StepAdjusting Buttonholes Ajuste de ojales Sewing Buttons Costura de botones 5Connectoutlet. the power supply plug into the wall2Removeoutlet. the power supply plug from Stitch Length WidthRecta Zipper Insertion Costura de cremallerasCentro Zipper foot / Pie para cremallerasSetStitch.the pattern selection dial to Straight Gathering / FruncidosPuntada recta Sewstitches.a single row or many rows of straightStitch Length Darning / ZurcidosAppliqués / Aplicaciones De laDe la Dibujo 3Cutstitching.away any fabric that is left outsideCorte toda la tela que quede fuera de la costura OtroKeep fingers away from moving parts, especially needles Cosa el contorno del diseño moviendo el aro de bordado Asegure con unas cuantas puntadas rectas al final del diseño16-3/16 16-1/8 Optional Accessories / Accesorios OpcionalesUsing the Walking Foot Utilización del pie móvil Recta Using the Quilting Foot Utilización del pie para acolchadosRemove the power supply plug from 1outlet 2Raise the needle and the presser foot6SetStitch.the pattern selection dial to the Straight Quilting design / Diseño de acolchadoNombre de la Using the 1/4-inch Quilting FootUtilización del pie para acolchados de 1/4 pulgadas Stitch Name Length Width PatternDespués de coser entre 2 3/4 pulg. y 3 cm Any Puntada Cualquiera Recta Zig-zagScrew / Tornillo Guide / Guía 4SetStitch.the pattern selection dial to the ZigzagAjuste el selector de puntadas en la puntada de zig-zag Screw / Tornillo Guide / Guía Folded hem / DobladilloMaintenance / Mantenimiento Changing the Light Bulb Cambio de la bombillaGraspthe left.the bobbin case, and then lift it out to Cleaning / LimpiezaCleaning brush / Cepillo de limpieza Race / Pista Coja la caja de la bobina y tire de ella hacia la izquierdaInstall the needle plate cover Tab / Pestaña Notch / Muesca Screws / TornillosTroubleshooting Symptom Possible cause How to put it rightThread ten LowerOr breaks Fabric isThere is a high Stitches areSkipped Pitched noise While sewingSolución de problemas Síntoma Causa posible Solución ReferenciaEl hilo inferior El hilo superiorSe rompe Correcta La tensión delHilo no es La tela estáEnhebrador de No se puedeUtilizar el AgujaIndex NumericsBobina Opcionales AgujaAguja gemela Colocación Bobina rápida Bombilla

XL-3500 specifications

The Brother XL-3500 is a versatile and user-friendly sewing machine designed for both beginners and experienced crafters. Known for its reliability and ease of use, this machine offers a wide range of features that cater to various sewing projects, making it an excellent choice for those looking to enhance their sewing skills.

One of the standout features of the Brother XL-3500 is its 35 built-in stitches, including utility, decorative, and quilting options. This variety allows users to explore creativity while meeting the demands of various sewing tasks. Each stitch can be easily selected via a straightforward dial, ensuring a hassle-free experience when changing stitches.

The XL-3500 also comes equipped with an automatic one-step buttonhole feature, which simplifies the buttonhole creation process. Users can quickly and accurately sew buttonholes, making garment construction or repair effortless. Additionally, the machine offers a convenient drop-in bobbin system, allowing for quick bobbin changes with minimal threading fuss. This feature is particularly appreciated by sewists who often switch between different threads and fabrics.

For added convenience, the Brother XL-3500 includes an easy-to-read LCD display that provides clear information about the selected stitch, allowing for seamless adjustments. The adjustable stitch length and width further enhance customization, enabling users to tailor their sewing according to their specific project needs.

The machine is also designed with portability in mind, featuring a lightweight build and a built-in carrying handle. This makes it easy to transport for classes, workshops, or simply moving it from room to room. Additionally, it includes a range of accessories such as presser feet, a needle set, and a foot pedal, ensuring that users have everything they need to get started right out of the box.

Safety features such as the automatic needle threading mechanism reduce the likelihood of errors and improve efficiency. The free arm functionality allows for easy access to tubular projects like sleeves or pant hems, making those tasks less cumbersome.

The Brother XL-3500 combines functionality with user-friendly design, making it an exceptional choice for anyone looking to embark on their sewing journey or expand their existing skills. With its diverse stitch options, ease of use, and thoughtful features, this machine stands out as a reliable tool for all sewing enthusiasts.