Bradley Smoker MG-2/BIR3 installation instructions Assembly of Components, Other replacement parts

Page 13

	Express® Lavatory System - MG Series with Battery Infrared Control
Installation Instructions	MG-2/BIR3

Assembly of Components

END CAP (LEFT) (PART NUMBER VARIES WITH COLOR OF UNIT. CONTACT YOUR LOCAL BRADLEY REP. FOR ASSISTANCE).

STAINLESS STEEL ACCESS PANEL 186-1263.

SPRAYHEAD BODY

(PART NUMBER VARIES WITH COLOR OF UNIT. CONTACT YOUR LOCAL BRADLEY REP. FOR ASSISTANCE).

BOWL

(PART NUMBER VARIES WITH COLOR OF UNIT. CONTACT YOUR LOCAL BRADLEY REP. FOR ASSISTANCE).

SPRAYHEAD

MOUNTING BOLTS (3)

END CAP (RIGHT)

(PART NUMBER VARIES WITH COLOR OF UNIT. CONTACT YOUR LOCAL BRADLEY REP. FOR ASSISTANCE).

Figure 8

Other replacement parts

Bradley Corporation • 215-1510 Rev. D; ECN 07-815

8/23/07

13

Image 13

Contents Table of Contents Installation InstructionsPre-Installation Information MG-2/BIR3 Express Lavatory System Dimensions Dimensions Rough in supplies and optional hot water heater Installation Instructions23/07 Bradley Corporation 215-1510 Rev. D ECN Rough in wall anchors Mount frame to wall Do not overtighten Install bowl assemblyHot Counterclockwise to increase Connecting electrical and supply tubingTerreon and panel maintenance Cleaning and Maintenance InstructionsStainless Steel Access Panel cleaning Terreon Bowl, Sprayhead and Pedestal End Cap cleaningOther replacement parts Assembly of ComponentsSensor assembly and solenoid valve access Infrared Window Sprayhead Body NUT Solution Remove debris between diaphragm and the valve seat Troubleshooting BIR3 ComponentsSolenoid Valve S07-072 closed body and S07-072A thru body Problem Limited water flow Thermostatic Mixing Valve Maintenance and TroubleshootingProblem External leaks in the system Repair Kit S65-259 Vernatherm Thermostatic Mixing Valve S01-524