Bradley Smoker MG-2/BIR3 installation instructions Infrared Window Sprayhead Body NUT

Page 15

	Express® Lavatory System - MG Series with Battery Infrared Control
Installation Instructions	MG-2/BIR3

Assembly of Components continued . . .

SENSOR EYES 30" (251-019A) 60" (251-019B)

INFRARED WINDOW 269-1241

SPRAYHEAD BODY

NUT

110-115

CONNECTOR 1/4" TUBE 145-089

ACCESS PLATE 150-201

	SCREW ALLEN SOCKET #10-24
HOUSING,	160-138
FLOW CONTROL
S05-142

Figure 11a

WINDOW

PURPLE EYE

Figure 11b

Bradley Corporation • 215-1510 Rev. D; ECN 07-815

8/23/07

15

Image 15

Contents Table of Contents Installation InstructionsPre-Installation Information MG-2/BIR3 Express Lavatory System Dimensions Dimensions Rough in supplies and optional hot water heater Installation Instructions23/07 Bradley Corporation 215-1510 Rev. D ECN Rough in wall anchors Mount frame to wall Do not overtighten Install bowl assemblyHot Counterclockwise to increase Connecting electrical and supply tubingTerreon Bowl, Sprayhead and Pedestal End Cap cleaning Cleaning and Maintenance InstructionsTerreon and panel maintenance Stainless Steel Access Panel cleaningOther replacement parts Assembly of ComponentsSensor assembly and solenoid valve access Infrared Window Sprayhead Body NUT Solution Remove debris between diaphragm and the valve seat Troubleshooting BIR3 ComponentsSolenoid Valve S07-072 closed body and S07-072A thru body Thermostatic Mixing Valve Maintenance and Troubleshooting Problem Limited water flowProblem External leaks in the system Repair Kit S65-259 Vernatherm Thermostatic Mixing Valve S01-524