Craftsman 139.3043 owner manual Features

Page 31

OPERATION

IMPORTANTSAFETYINSTRUCTIONS

To reducethe risk of SEVEREINJURYor DEATH:

1.READAND FOLLOWALL WARNINGSAND INSTRUCTIONS.

2.ALWAYS keep remote controls out of reach of children. NEVERpermit children to operate or play with garage door control push buttons or remote controls.

3.ONLY activategarage door when it can be seen clearly, it is

properly adjusted, and there are no obstructions to door travel.

4.ALWAYS keepgarage door in sight until completely closed.

NO ONESHOULDCROSSTHE PATHOFTHE MOVINGDOOR.

5.NO ONESHOULDGOUNDERA STOPPED,PARTIALLY OPENEDDOOR.

6.If possible, use emergency release handleto disengage trolley ONLY when garagedoor is CLOSED.Weakor broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly,causing SEVEREINJURY or DEATH.

7.NEVERuse emergency releasehandle unless garagedoorway is clear of persons and obstructions.

8.NEVERuse handle to pull garagedoor open or closed. If rope knot becomes untied, you could fall.

9.After ANY adjustments are made,the safety reversalsystem MUST betested.

10.Safety reversalsystem MUST betested every month. Garagedoor MUST reverseon contact with 1-1/2" high (3.8 cm) object (or a 2x4 laid flat) on the floor.

11.ALWAYS KEEPGARAGEDOORPROPERLYBALANCED(see page 3). An improperly balanced door may NOT reverse when required and could result in SEVEREINJURY or

DEATH.

12.ALL repairs to cables, spring assembliesand other hardware, ALL of which are under EXTREMEtension, MUST

be made by a trained door systems technician.

13.To avoid SERIOUSPERSONALINJURYor DEATHfrom electrocution, disconnect ALL electric and battery power BEFOREperforming ANY service or maintenance.

14.This operator system is equippedwith an unattended

operation feature. The door could move unexpectedly. NO ONESHOULDCROSSTHE PATHOFTHE MOVINGDOOR.

15.DONOTenablethe Timer-to-Close functionality if operating either one-piece or swinging garagedoors. To be enabled ONLYwhen operating a sectional door.

16SAVETHESEINSTRUCTIONS.

Features

Your garagedoor opener is equippedwith features to provide you with greater control over your garagedoor operation.

TIMER-TO-CLOSE

The Timer-to-Close feature automatically closes the door after a specified time period that can be adjusted using the door control. Prior to the door closing there will be an audible and visual alert.

ASSURELINKTM

AssureLinkTM technology uses a 900MHz signal to provide two-way communication betweenthe garage door opener and AssureLinkTM accessories. Your garagedoor opener is compatible with up to 8 AssureLinkTM accessories.

REMOTECONTROLSAND DOORCONTROLS

Your garagedoor opener is compatible with up to 2 door controls. Your garagedoor opener has already been programmed at the factory to operatewith your remote control, which changes with each use, randomly accessing over 100 billion new codes. The garage door opener is compatible with up to 8 remote controls and 1 keyless entry.

THE PROTECTORSYSTEM® (SAFETYREVERSINGSENSORS)

When properly connected and aligned, the safety reversing sensors will detect an obstruction in the path of the infrared beam. If an obstruction breaks the infrared beamwhile the door is

closing, the door will stop and reverseto full open position, and the opener lights will flash 10 times. If the door is fully open, and the safety reversingsensors are not installed, or are misaligned,

the door will not close from a remote control. However,you can close the door if you hold the button on the door control or keyless entry until the door is fully closed. The safety reversing sensors do no effect the opening cycle.

ENERGYCONSERVATION

For energy efficiency the garagedoor opener will enter sleep mode when the door is fully closed. The sleep mode shuts the garage door opener down until activated. The sleep mode is

sequencedwith the garage door opener light bulb; as the light bulb turns off the sensor LEDswill turn off andwhenever the

garage door opener lights turn on the sensor LEDswill light. The garage door openerwill not go into the sleep mode until the garage door opener has completed 5 cycles upon power up.

LIGHTS

The garage door opener light bulbs will turn on when the opener is initially plugged in; power is restored after interruption, or when the garagedoor opener is activated. The lights will turn off automatically after 4-1/2 minutes. An incandescentA19 light bulb (100 watt maximum) or for maximum energy efficiency a 26W (100W equivalent) compact fluorescent light (CFL)bulb may

be used.

The garage door opener is equipped with an addedfeature; the lights will turn on when someone enters through the open garage door and the safety reversing sensor infrared beam is broken. For addedcontrol over the light bulbs on your garage door opener, see the Door Control section.

31

Image 31
Contents Garagedooropener Abridorde Puertadecochera BackCover WarrantySafety SymbolReviewand Signal WordReview 41-42One-Piece Door Preparingyourgarage doorPlanning Sectionaldoor InstallationSectionaldoorinstallation AccessDoorONE-PIECEDOORWITHOUT Track ONE-PIECEDOOR InstallationsONE-PIECEDOORWITH Track With screws3 CartonInventoryNut AssemblyhardwareInstallationhardware HardwareInventoryRail TOP Assemble the Rail and Install the TrolleyFasten the Rail to the Motor Unit Inner TrolleyInstall the Idler Pulley Install the Belt Set the Tensionand Install the SprocketCover ImportantinstallationinstructionsHardware Determine the HeaderBracketLocationOne-piecedoor withouttrack Spring Install the Header BracketWall Headerbracketinstallation CeilingheaderbracketinstallationHeaderWall HeaderBracket IdlerPulley Header0 Attach the Raft to the Header BracketSectionaldooror ONE-PIECEDOORWITH Track Positionthe OpenerONE-PIECEDOORWITHOUTTRACK Orts Hang the OpenerFinished Ceiling WattMax StandardLightBulb Install the LightsAttach the Emergency Release Rope and Handle 100WattMaxWoodDoors Metal, insulated or light weight factoryreinforced doorsFasten the Door Bracket SectionaldoorsBracket Self-ThreadingScrew 1/4-14x5/8Straight DoorArm Connect Door Arm to TrolleySectionaldoorsonly Hole alignment alternativeRing ConnectDoorArm to Tro//eyAttach the Warning Labels OuterConnected to the garage door opener in a later step Install the Door ControlWirethe DOORCONTROLFIGURE2 IntroductionImportantinformationaboutthe Safetyreversing Sensor Install The ProtectorSystemInstall the Door Control Wirethe Doorcontrolto the GaragedooropenerFloor installation Figure Installingthe BracketsGarage door trackinstallation preferred Waft installation Figures2Connectto Garagedooropener Option B Pre-Wired /nsta//ationInsta// TheProtectorSystem MountingElectrical Requirements Aligningthe SafetyReversingSensorsPermanentwiring Optionb WireNutsProgrammingbuttons Aligning the Safety Reversing SensorsIf the Amberled Onthe Sendingsensoris not Glowing If the Greenled on the Receivingsensoris not GlowingProgramthe Travel IMPORTANTNOTEFor one-piece door installations refer toTest The ProtectorSyster Testthe SafetyReversalSystemAdjust ImportantsafetycheckChargethe Battery Testthe BatteryInstall the Battery Batterystatusled GreenledFeatures Door Control Menu Navigation Smart ControlPane/SetupFeatures SettingsEraseall Remotecontrolsand Keylessentries ProgrammingTo Erase the Memory ENTERbuttonEveryyear To Openthe Door ManuallyCareof YourOpener EverymonthFlash 4 Flashes DiagnosticchartFlash 2 Flashes Flash 3 FlashesFlashes 6 Flashes Diagnostic UP DownArrow Flashes 4FLASHES FlashesDescription Rail Assembly Parts Installation Parts41A7630 Motor Unit Assembly PartsKEY Part 41B135 Line cord139.53728 139.53729 Available only throughSears Parts & ServiceInstallingopener in garagewith low headroom clearance ForSectionalDoorsOnly41A7569Page Page Revisi6n de lossimbo/osy trminosde seguridad Herramientasnecesarias Preparaci6nde la puerta de su cocheraPuertade unasola pieza EN Posicion Cerrada Planificaci6nInstalacioncon Unapuertaseccional Instalaciincon UnapuertaseccionalPuertade Unapiezaconcarril Planificaci6n continUaInstalacioncon Puertasde Unasolapieza Puertade UNA Solapiezasin CarrilSecciOndelantera delrielcabezal Inventario de la caia de cartdnCubiertadela banda Contornillos3Tornilleriay Piezasparaelmontaje Inventario de piezasTornilleriay Piezasparalainstalacion Estaspiezasse Muestranen SU Tamaioreal Monte e/fie/e insta/e e/tro/eFije e/tie/a la unidadde/motor PartesuperiorTrole Destornillador Orificiode paro deltrole Nstale la po/ea IocaEstas Piezasse Iviuestranen SU Taiviaioreal Estas Piezasse Muestran EN SU Tamaio Normal Nsta/e /a bandaConector deltrole ConranuraEstas Piezasse Muestran EN SU Tamaionormal InstruccionesimportantesparalainstalacionAccesoriosde montaje Determine d6nde va a insta/ar la mnsulade/cabezaEstas Piezasse Muestran EN SU Tamaioreal Insta/e /a mnsu/a de/cabezaInstalaciinde LA Mensuladel Cabezalen LA Pared Delantera Instalaciinde LA Mensuladel Cabezalen ElcielorasoOrificiode montaje Co/oquee/fie/en la mnsula de/cabezaPUERTASECCIONAL0 Puertade Unasolapiezacon Carril Coloque el abridor en posici6nPuertade Unasolapiezasin Carril Estas Piezas SE Muestran EN SU Tamaioreal Cuelgueel abridorColoquela Manija y la Cuerdade Emergencia Instale /as lucesPuertasseccionales Fije la m6nsuladela puertaPuertas de madera Puertasde Unasolapieza Fije /a mnsu/a de la puerta contin#aCorrecto Incorrecto Conecteel brazo de la puerta al trole16-18x7/8 SI3LOPARA PuertasseccionalesTrole Conectee/brazo de/a puerta a/tro/e contin#aColocar/as etiquetas de advertencia Todaslas Puertasde UnasolapiezaMontar Elcontrolde LA PUERTAFIGURA3 Instalar el controlde la puertaIntroduccion Alambrede Controlde LA PUERTAFIGURA2Instale la ProtectorSystem+ Instalar e/contro/de/a puerta continUaTENDERLOSCABLESDESDEELCONTROLHASTAELABRE-PUERTA FIGURA4 Instalacifin en el piso Figura Instale la ProtectorSystem contin#aInstalacionde LAS Minsulas Instalaci6n en la pared Figuras2 yOpci#n B Concables preinstalados Insta/e /a ProtectorSystem contin#aMontaje Opci#n a Instalaci#nsin cables preinstaladosConexioncon Cableadopermanente Requisitospara /a insta/aciCne/ ctricaAlineaciCnde los sensoresde reversa de seguridad CorrectoincorrectoIntroducci6n Ineaci6n de/os sensores de reversa de seguridad continUaProgramaci6nde/desp/azamiento Ajuste Pruebe e/sistema de seguridadde reversaPrueba la ProtectorSystem PruebaPrueba de la bateria Instale la bateriaFunciones Paraabrir o cerrarla puertautilizarelpulsadorde barra Funcionescontin#aContro/de /a puerta Pu/sadordebarraFunciones Configuraci6nde/a Smart Contro/PaneProgramaciCn Para borrar la memoriaBorrartodoslos Dispositivos Una vez al afio C6moabrir la puerta manualmenteMantenimiento de su abridor de puerta de cochera Una vez al mesSolucion Destello 4 Destellos 51DESTELLO 5 DestellosSensoresde Tablade DiagnisticoDestellos 1DESTELLO Tablade DiagnosticoSeguridadenlaparedo enelpiso OpcionalesParalainstalaci6ndelsensordeS61opara puertas seccionales MY-HOME

139.3043 specifications

The Craftsman 139.3043 garage door opener stands out as a robust and reliable solution for homeowners looking to enhance the functionality and security of their garage spaces. This model is designed with the latest technologies and features, making it one of the preferred choices in the market.

One of the key features of the Craftsman 139.3043 is its powerful motor, which provides a smooth and quiet operation. With a lifting capacity that accommodates most standard residential garage doors, this opener ensures that users can operate their doors seamlessly without unnecessary noise. The blend of power and quiet functionality enhances the overall user experience, making it ideal for homes with bedrooms or living areas adjacent to the garage.

The opener also boasts a durable rail system, designed for easy installation and longevity. The straightforward design simplifies the installation process, enabling a typical DIY enthusiast to set it up without the need for professional assistance. Additionally, the sturdy construction of the rail system ensures that it can withstand the rigors of daily use.

Safety and security are paramount with the Craftsman 139.3043. It incorporates advanced safety features, such as the automatic reverse function, which prevents accidents by reversing the door's motion when an obstacle is detected. This feature adds peace of mind for families with children and pets. Furthermore, the built-in security technology includes a rolling code system that changes the access code each time the remote is used, thus protecting against potential unauthorized access.

The Craftsman 139.3043 is equipped with remote control capabilities, allowing users to open and close their garage doors from a distance. The remote is designed to be user-friendly, with buttons that are easy to operate. Additionally, many models include a smartphone app integration, empowering users to control their garage door via their mobile devices, providing convenience and modern accessibility.

Another notable characteristic is the vibrant LED lighting that illuminates the garage space when the door is in use. This not only enhances visibility but also contributes to the overall safety of the area, preventing accidents in dimly lit environments.

In summary, the Craftsman 139.3043 garage door opener combines power, ease of use, advanced safety features, and modern technology. Its reliable performance and user-friendly elements make it a top choice for homeowners seeking an effective solution to their garage door needs.