Mitsubishi Electronics MSZ-GA24NA operating instructions Contents

Page 2

● OPERATING INSTRUCTIONS ●

CONTENTS

 

■ SAFETY PRECAUTIONS

1

 

 

■ NAME OF EACH PART

3

 

 

■ PREPARATION BEFORE OPERATION

4

 

 

■ SELECTING OPERATION MODES

5

 

 

■ FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT

6

 

 

■ ECONO COOL OPERATION

7

 

 

■ POWERFUL OPERATION

7

 

 

■ TIMER OPERATION (ON/OFF TIMER)

7

 

 

■ CLEANING

8

 

 

■ WHEN YOU THINK THAT TROUBLE HAS OCCURRED

9

 

 

■ WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME

10

 

 

■ INSTALLATION PLACE AND ELECTRICAL WORK

10

 

 

■ SPECIFICATIONS

10

 

 

 

 

 

SAFETY PRECAUTIONS

•Since rotating parts and parts which could cause an electric shock are used in this product, be sure to read these “Safety Precautions” before use.

•Since the cautionary items shown here are important for safety, be sure to observe them.

•After reading this manual, keep it together with the installation manual in a handy place for easy reference.

•Be sure to receive a guarantee card from your dealer and check that the purchased date and shop name, etc. are entered correctly.

Marks and their meanings

WARNING : Incorrect handling could cause serious hazard, such as death, serious injury, etc. with a high probability.

CAUTION : Incorrect handling could cause serious hazard depending on the conditions.

WARNING

Do not connect the power cord to an intermediate point, use an extension cord, or connect multiple devices to a single AC outlet.

• This may cause overheating, fi re, or electric shock.

Make sure the power plug is free of dirt and insert it se- curely into the outlet.

• A dirty plug may cause fi re or electric shock.

Do not bundle, pull, or modify the power cord, and do not apply heat or place heavy objects on it.

• This may cause fi re or electric shock.

Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.

•This may create sparks, which can cause fi re.

•After the indoor unit is switched OFF with the remote con- troller, make sure to turn the breaker OFF or disconnect the power plug.

Do not expose your body directly to cool air for a prolonged length of time.

• This could be detrimental to your health.

The unit should not be installed, relocated, or repaired by the user.

•An improperly handled air conditioner may cause fi re or electric shock.

Do not insert your finger, a stick, or other objects into the air inlet or outlet.

• This may cause injury, since the fan inside rotates at high speeds during operation.

Meanings of symbols used in this manual

: Be sure not to do.

: Be sure to follow the instruction.

: Never insert your fi nger or stick, etc.

: Never step onto the indoor/outdoor unit and do not put anything on them.

: Danger of electric shock. Be careful.

: Be sure to disconnect the power supply plug from the power outlet.

: Be sure to shut off the power.

In case of an abnormal condition (such as a burning smell), stop the air conditioner and disconnect the power plug or turn the breaker OFF.

•A continued operation in the abnormal state may cause a malfunction, fi re, or electric shock. In this case, consult your dealer.

When the air conditioner does not cool or heat, there is a possibility of refrigerant leakage. In this case, consult your dealer. If a repair involves recharging the unit with refrigerant, ask the service technician for details.

•The refrigerant used in the air conditioner is safe. Normally, it does not leak. However, if refrigerant leaks and comes in contact with a heat source such as a fan heater, kerosene heater, or cooking stove, it will create a harmful gas.

CAUTION

Do not touch the air inlet or the aluminum fins of the indoor/outdoor unit.

• This may cause injury.

Do not use insecticides or flammable sprays on the unit.

• This may cause a fi re or deformation of the unit.

Do not expose pets or houseplants to direct airflow.

• This may cause injury to the pets or plants.

Do not place other electric appliances or furniture under the indoor/outdoor unit.

•Water may drip down from the unit, which may cause damage or malfunction.

Do not leave the unit on a damaged installation stand.

• The unit may fall and cause injury.

En-1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SPLIT-TYPE AIR Conditioners For userContents Consult your dealer for installing the air conditioner Do not pull the power cordDo not operate switches with wet hands Provide a dedicated power supply for the air conditionerIndoor unit Remote controllerName of Each Part Outdoor unitChanging temperature units ºF→ºC Installing the remote controller batteriesSetting current time Preparation Before OperationSelecting Operation Modes Manual FAN Speed and Airflow Direction AdjustmentAuto SwingEcono Cool Operation Powerful OperationWhat is Econo COOL? Front panel CleaningAir cleaning filter Anti-Allergy Enzyme Filter Air filter Catechin air filterWhen YOU Think That Trouble has Occurred Installation place Installation Place and Electrical WorkSpecifications When using the air conditioner againIndicaciones y sus significados ÍndiceMedidas DE Seguridad Símbolos utilizados en este manual y su significadoNo utilice los mandos con las manos mojadas No tire del cable de alimentaciónNo cargue ni desarme las pilas y no las arroje al fuego Pida a su distribuidor que instale el aire acondicionadoUnidad exterior Nombre DE LAS PartesUnidad interior Controlador remotoAjuste de la hora actual Preparación Antes DE LA Puesta EN MarchaInstalación de las pilas del controlador remoto Cambio de unidades de temperatura ºF→ºCSelección DE Modos DE Funcionamiento Dirección del aire cambia con cada pulsación en el OscilaciónPulse Orden siguienteFuncionamiento Powerful Potente Parte posterior del filtro de aire LimpiezaFiltro de aire filtro de aire de taninos InstruccionesSI Cree QUE HA Ocurrido Algún Problema Al volver a usar el acondicionador de aire EspecificacionesLugar DE Instalación Y Trabajo Eléctrico Lugar de instalaciónPrecaution Symboles et leur significationSignification des symboles utilisés dans ce manuel Table DES MatieresCouper le disjoncteur par temps d’orage Ne jamais tirer sur le cordon d’alimentationNe pas faire fonctionner le climatiseur pendant plus de Prévoir un circuit réservé à l’alimentation du climatiseurUnité interne PowerfNomenclature Unité externeRéglage de l’heure Insertion des piles dans la télécommandePreparatif D’UTILISATION Changement des unités de température ºF→ºCSelection DES Modes DE Fonctionnement Auto ManuelOscillation ’ailette monte et descend de façon intermittentePuissance Appuyez sur les touches Augmenter etDiminuer pour régler l’heure de la minuterie ClignoteFiltre d’épuration d’air filtre antiallergique à enzymes NettoyagePanneau frontal Filtre à air filtre à air catéchineEN Presence D’UNE Panne Potentielle Lieu d’installation Lieu D’INSTALLATION ET Travaux ElectriquesLorsque le climatiseur doit être remis en service Fiche TechniqueJG79A166H01

MSZ-GA24NA specifications

The Mitsubishi Electronics MSZ-GA24NA is a versatile and efficient ductless mini-split air conditioning unit that has garnered attention for its advanced features and reliable performance. Designed for residential and light commercial applications, this model combines energy efficiency with innovative technology to deliver optimal indoor comfort year-round.

One of the standout features of the MSZ-GA24NA is its impressive Seasonal Energy Efficiency Ratio (SEER) rating, which ensures lower energy consumption while delivering powerful cooling and heating capabilities. This unit is equipped with a high-efficiency inverter-driven compressor, enabling it to adjust its capacity based on current temperature needs. This results in stable cooling and heating, along with significant energy savings over time.

The MSZ-GA24NA employs advanced filtration systems, including a high-efficiency HEPA filter, which captures even the smallest particles, improving indoor air quality. Additionally, it features a built-in plasma filter that neutralizes odors and eliminates harmful pollutants, making it an excellent choice for allergy sufferers and those seeking cleaner air.

This model is equipped with Mitsubishi's proprietary i-See Sensor technology. This innovative feature allows the unit to detect the temperature distribution within the room, adjusting air direction accordingly for uniform comfort. The i-See Sensor ensures that the space maintains a consistent temperature, preventing hot or cold spots, which enhances overall comfort for occupants.

Noise reduction is another crucial characteristic of the MSZ-GA24NA. Designed with a quiet operation mode, the indoor unit operates at a sound level as low as 19 dB, making it one of the quietest systems in its class. This makes it ideal for bedrooms, offices, or any space where noise may be a concern.

The MSZ-GA24NA also offers user-friendly controls, with options for wireless remote control and compatibility with smart home systems. This allows users to easily adjust settings, monitor energy consumption, and create schedules to optimize comfort and efficiency.

Durability and reliability are key aspects of the MSZ-GA24NA, which is engineered to withstand various weather conditions, thanks to its robust construction and weather-resistant components. Its slim design enables easy installation in a variety of spaces, making it a versatile choice for many applications.

In summary, the Mitsubishi Electronics MSZ-GA24NA stands out in the market for its blend of efficiency, advanced technology, and user-friendly features. With exceptional cooling and heating capabilities, air quality enhancements, and a commitment to silent operation, it is an ideal solution for those looking to improve their indoor environment while keeping energy costs low.
Top Page Image Contents