Electrolux D4100 Preparing Cabinet for Fitting of Oven, Do not lift the appliance by the handles

Page 44

THINGS TO NOTE

This cooker is designed to be fitted in cabinets of the recommended dimensions as shown (Fig. 3), page 44.

If your cabinet interior dimension is between 565-570mm the oven may still be fitted. However, a minor modification to the cabinet will be required.

The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

Enquiries regarding the installation of the cooker point if required should be made to your Regional Electricity Company to ensure compliance with their regulations.

The cooker socket switch should be outside the cabinet but within 2m of the cooker to make it accessible to switch off the cooker in case of an emergency.

To protect the hands wear gloves when lifting the oven into its housing.

Do not lift the appliance by the handles.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the cooker is connected to the mains supply and re-checked after fitting.

PREPARING CABINET FOR FITTING OF OVEN

Make sure the cabinet is the correct size for the appliance to be fitted (Ref. Fig. 3), page 44.

If the size is between 565-570mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 560-565mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

The cabinet must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.

43

Image 44
Contents Competence D4100 Important Safety Information Contents Description of the Oven Getting to Know Your Oven Control PanelGrill and Oven Furniture Before Using the Oven for the First Time Minute Minder Electronic TimerSET the Time of DAY To SET the Timer to Switch on and OFF Automatically To Cancel the Minute MinderHOW to SET the Oven Timer Control To Return the Cooker to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme LTHINGS to Note Automatic CookingDual Grill Using the GrillUsing the Telescopic Runners Grill PAN and Handle Hints and TipsGrilling Chart Food Grill TimeTo FIT the Second Oven Shelf Using the Second OvenSecond Oven Hints and Tips Second Oven Cooking Chart FoodMain FAN Oven LHINTS and Tips Using the Conventional Oven Conventional OvenHints and Tips Oven Cooking Chart FAN Oven ConventionalRoasting Chart Roasting ChartInternal Temperatures Meat SECOND/FAN Cooking Time OvenUsing Pizza Function Pizza FunctionCooking Times Using SpeedcookSpeedcook Hints and Tips Using Thermal Grilling Thermal GrillingThermal Grilling Chart Food Shelf TempUsing Defrost Feature DefrostingPage Helpful Hints When Buying and Preparing Food Meat TemperaturesCare and Cleaning Cleaning MaterialsCleaning the Outside of the Oven Removing and Replacing Wirework Side RunnersTo Remove the Inner Glass Cleaning Inside the OvensCleaning the Door Glass To Replace the Inner Glass Panel To Clean the Inner Glass Door PanelsCleaning the Grill and Oven Furniture Replacing AN Oven Light Bulb Problem If Something Doesnt WorkOven light fails to illuminate Guarantee Conditions European GuaranteeService and Spare Parts Customer Care DepartmentAEG SL1 1DZAEG Service Centres Midlands LO on & East Anglia South East South West Installation Instructions Technical DetailsChoice of Electrical Connection Preparing Cabinet for Fitting of Oven Do not lift the appliance by the handlesCross section HOW to Finish Unpacking Tools RequiredMaking the Electrical Connections Preparing CableTo Remove Cover of Mains Terminal Checking Electrical Connections Connecting to Mains TerminalConnecting to a HOB or Cooker Point Fitting Into the Cabinet Appliance by the handlesCompetence D4100 Rating Plate Reference Telephone 0870 5