Instruction on setting up 55
Instruction on setting up
1Important! The new appliance may only be installed and connected by quali fied personnel.
Please observe this instruction, otherwise the warranty will not cover any dam age that may occur.
Setting up
•In the units or furniture surrounding the appliance, veneers or plastic coatings must have been made up using heatesistant bonding agents (100°C). If plas tic coatings or cements are not sufficiently heatesistant, the coating may be deformed or loosened.
•The appliance may be installed up against tall units or walls on one side only.
•The distance between the cooking surface and the cooker hood must as a minimum be as great as that indicated in the installation instructions for the cooker hood.
•If the appliance is being placed on a base, measures must be taken to prevent the appliance from sliding off the base.
Making the appliance level
Underneath the appliance there are
4 adjustable feet, which can be used to even out small unlevelnesses in the floor.
1.Remove the pan drawer.
2. Turn the adjustable feet to make them higher or lower as required, until the cook er is standing level.
3. Re pan drawer.
3 The adjustable feet are easier to turn, if the cooker is tilted slightly to take the weight off the foot.