Oven Shelves and Shelf Supports
To clean the oven shelves, soak in warm soapywaterandremovestubbornmarkswith
awell wetted soap impregnated pad. Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning.
)Proceed as follows:
1. remove the front screw while keeping the shelf support in position with the other hand (Fig. 13);
2. disengage the rear hook and take off the shelf support (Fig. 14);
3. once the cleaning is carried out, refit the shelf supports following the procedure in reverse.
Please, ensure the retaining nuts are secure when refitting the shelf support.
Replacing the oven light
Disconnect the appliance from the electricitysupply.
If the oven bulb needs replacing, it must comply with the following specifications: electric power, 15 W/25 W; electric rate, 230 V(50Hz);resistanttotemperaturesof300°C; connection type: E14. These bulbs are availablefromyourlocalServiceForceCentre.
) To replace the faulty bulb:
1. Ensure the oven is disconnected from the electrical supply.
2. Turn the glass cover anticlockwise (Fig.
15).
3. Remove the faulty bulb and replace it with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Fig. 13
Fig. 14
Fig. 15