Electrolux E15IM60E manual Leveling the Unit

Page 14

Leveling 15

LEVELING THE UNIT

IMPORTANT

It is extremely important that the unit is level. If it is not level, the ice mold will not fill evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into the storage area which will cause the ice in the bin to melt pre-maturely. Remember that floors near drains have a tendency to slope towards the drain.

1Use a level to check the levelness of the ice maker from front to back and from side to side (see Figure 11).

2If the ice maker is not level, adjust the feet on the corners of the unit as necessary (see Figure 12).

3Check the levelness after each adjustment and repeat the previous steps until the unit is level.

CHECK

LEVEL

Figure 11

Figure 12

TURN FOOT TO ADJUST

Image 14
Contents Use & Care Guide Make a Record for Quick Reference Finding InformationPlease Read and Save this Guide Product Registration Card QUESTIONS?Safety Precautions SafetyImportant Safety Instructions DefinitionsGeneral Precautions Installation Installation DimensionsIce Makers With Factory Installed Drain Pump Drain InstallationInstalling the Drain Gravity DrainBack View Connecting a Drain Pump Drain Pump ConnectionSite Preparation Preparing the SiteCabinet Or Wall Door Swing Clearance Needed Connecting the Water Supply Water Supply ConnectionUL134 Leveling Leveling the UnitDoor Reversal Reversing the Door Some ModelsHinge Screw PIN To adjust DoorAdjustmentAdjusting the Door Door Closers Boss Table of Contents Built-In Installation Installing a BUILT-INStart-up Initial START-UPIce Cube Thickness OperationNormal Operation ICE Dispenser Operation & Care Sample Area Exterior Cleaning As Required MaintenanceMaintaining and Cleaning Your Icemaker Special ConsiderationsInterior Cleaning As Required Do not Clean with Steel Wool PadsCondenser Cleaning Every 3 Months Self Cleaning Every 6 Months Inlet Screen Cleaning Every Year Storage, Vacation and Moving Draining for NON-USETroubleshooting Guide TroubleshootingBefore YOU Call for Service If Service is Required Problem Possible Cause RemedyWarranty Information Period WE will Responsible for Full ONE-YEAR