Electrolux E15IM60E manual Interior Cleaning As Required, Do not Clean with Steel Wool Pads

Page 26

26Maintenance

•DO NOT CLEAN WITH STEEL WOOL PADS.

•DO NOT USE CLEANERS THAT ARE NOT SPECIFICALLY INTENDED FOR STAINLESS STEEL (this includes glass, tile and counter cleansers).

•If any surface discolors or rusting appears, clean it quickly with Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive cloth. Always clean in the direction of the grain. Always finish this process with a high quality, all-in-one stainless steel cleaner/polish to prevent further problems.

•USE OF ABRASIVE PADS SUCH AS SCOTCHBRITE WILL CAUSE THE GRAINING IN THE STAINLESS TO BECOME BLURRED.

•Rust that is allowed to linger can penetrate into the surface of the stainless steel and become impossible to remove.

!CAUTION

Stainless steel models exposed to chlorine gas and moisture, such as areas with spas or swimming pools, may have some discoloration of the stainless steel. Discoloration from chlorine gas is normal. Follow exterior cleaning instructions.

Interior Cleaning - As Required

1Disconnect power to the ice maker.

2Open the door and remove any ice from the storage bin.

3Wipe down the interior and storage bin with a solution of non-abrasive mild soap or detergent and warm water. Rinse with clean water.

4Sanitize the bin with a solution of 1 tablespoon of bleach in 1 gallon of warm water. Rinse thoroughly with clean water.

5Check that all drain connections are in place.

!CAUTION

•DO NOT use solvent cleaning agents or abrasives on the interior. These cleansers may transmit taste to the ice cubes, or damage or discolor the interior.

•DO NOT use any cleaner on the evaporator plate other than Ice Machine Cleaner. Other cleaners may affect ice quality, or cause damage to the unit that is not covered under warranty. See AUTOMATIC CLEAN CYCLE for more information.

6Reconnect power to the unit.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Use & Care Guide Make a Record for Quick Reference Finding InformationPlease Read and Save this Guide Product Registration Card QUESTIONS?Safety Precautions SafetyImportant Safety Instructions DefinitionsGeneral Precautions Installation Installation DimensionsIce Makers With Factory Installed Drain Pump Drain InstallationInstalling the Drain Gravity DrainBack View Connecting a Drain Pump Drain Pump ConnectionSite Preparation Preparing the SiteCabinet Or Wall Door Swing Clearance Needed Connecting the Water Supply Water Supply ConnectionUL134 Leveling Leveling the UnitDoor Reversal Reversing the Door Some ModelsHinge Screw PIN To adjust DoorAdjustmentAdjusting the Door Door Closers Boss Table of Contents Built-In Installation Installing a BUILT-INStart-up Initial START-UPIce Cube Thickness OperationNormal Operation ICE Dispenser Operation & Care Sample Area Exterior Cleaning As Required MaintenanceMaintaining and Cleaning Your Icemaker Special ConsiderationsInterior Cleaning As Required Do not Clean with Steel Wool PadsCondenser Cleaning Every 3 Months Self Cleaning Every 6 Months Inlet Screen Cleaning Every Year Storage, Vacation and Moving Draining for NON-USETroubleshooting Guide TroubleshootingBefore YOU Call for Service If Service is Required Problem Possible Cause RemedyWarranty Information Period WE will Responsible for Full ONE-YEAR
Top Page Image Contents