Cuisinart DFP-3 Assembly Instructions, Never touch metal cutting blades, which are razor sharp

Page 7

ASSEMBLY INSTRUCTIONS

Read all instructions on these two pages before you start. Check that your household voltage matches that shown on label on bot- tom of food processor base.

Note: Before using the Handy Prep™ for the first time, wash all parts except base in hot, soapy water. Rinse and dry thoroughly. Handle metal blade and slicing disc or shredding disc with great care. Their blades are razor-sharp. Do not leave them in soapy water, where they may disappear from sight. Never immerse base in water or any liquid.

1.Put base on counter or table near electrical outlet. Do not plug in until food processor is totally assembled.

2.Pick up empty clear work bowl, holding it in both hands, with handle toward you.

Put bowl on base, fitting center tube over shaft on base and placing handle slightly to left of front center (7 o’clock.)

Hold bowl by handle and turn bowl counter- clockwise as far as it will go. It will click into locked position.

3.Pick up metal blade by center plastic part.

Never touch metal cutting blades, which are razor sharp.

Place blade over motor shaft, twisting it gently clockwise until it drops

into place over shaft. Push top of center plastic part to push blade down as far as it will go. Lower blade should almost touch bottom of bowl.

4.Put cover on bowl, with feed tube at back, slightly to right of center.

5.With hand on feed tube, turn cover coun- terclockwise to lock it into place. It will click into position easily. Do not force it.

Motor will not start unless work bowl is securely locked in position and cover is securely locked on work bowl.

6.Hold pusher with more rounded side toward you and insert it in feed tube. Always use pusher to guide food through feed tube. Never use your fingers or spatula.

Plug your Cuisinart® Handy Prep™ into a household electrical outlet.

To remove cover, unlock it by turning it clockwise, then lift it straight up.

THE MACHINE

FUNCTIONS

Control switch on base of machine has 3 positions, giving you fingertip control of operation.

ON (Continuous)

For continuous operation, move control switch up to

ON position. Motor will start, if you have followed assembly instructions.

OFF

To turn motor off, move control switch down to OFF position in center.

PULSE

For on-off operation, called pulse-chopping or pulsing, press control switch down to PULSE position, then release it.

Motor runs as long as you hold control switch down. Motor stops when you release control switch. Try it a few times.

You control duration and frequency of pulses by length of time you hold control switch down and rate at which you press it. Allow enough time between pulses to let food in work bowl fall to bottom.

Always use switch for pulse/chopping. Never turn cover back and forth to start and stop processor.

OPERATING INSTRUCTIONS

You may want to practice before actually using the Handy Prep™ to prepare food for a meal. Try soft fruit or vegetables like an apple or zucchini.

Chopping, Puréeing, Mixing

1.Remove cover and put some food into work bowl. First, cut food into 3/4-inch (2cm) pieces. You will get a more even chop if you start with pieces that are all the same size.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DFP-3 Food Amount DFP-3 CapacitiesImportant Unpacking Instructions Operation CleaningGetting Ready Blades are sharp. Handle them carefullyTable of Contents Motor Base with motor shaft Position control switchPusher that slides inside the feed tube Never touch metal cutting blades, which are razor sharp Assembly InstructionsAdding Food While Processing Slicing Shredding More Than 3 Cups Food Slicing Shredding Less Than 3 Cups FoodFood Blade Preparation/Method Results/Notes Food Prep GuideSmaller pieces until tender For small, round slices Pack feed tube for desired resultsSlices are uneven or slanted Adjust pusher pressure to food textureFood is unevenly chopped Liquid leaks from bottom of work bowl onto motor baseTechnical Data Warranty Pieces Recipe NotesGuacamole Fresh Tomato & Roasted Pepper Salsa CrudaHerbed Chevre & Sun-dried Tomato Torta HummusCreamy Ricotta Herb Dressing/Dip VinaigretteCup fresh flat-leaf parsley Teaspoon dry mustard Flavors to blend ColeslawAsian Carrot Salad Small red onion 2-3 ounces, peeled, halved verticallyPotatoes au Gratin Marinated Cucumber SaladMeatloaf with Mushrooms & Herbs Savory Sweet Potato & Carrot BakeGinger Chicken & Vegetable Stir-Fry Cup cold water PizzaPizza Dough Makes 14 ounces dough to makeCup whole wheat flour Quick & Simple Pizza SauceWhite Wheat Baguette Makes one baguette, about 12 ouncesTablespoon lowfat cream cheese Lows Cherry Walnut Cinnamon BunsPowdered Sugar Glaze Cup walnut halvesOrange Ginger Variation Lemon Macadamia Nut BreadFluffy Buttermilk Biscuits Cranberry Pistachio SconesChocolate Cupcakes Double Chocolate Brownies with WalnutsFor the pastry Chocolate FrostingApple Streusel Pie Tablespoons unsalted butter, cut Pinch saltTo assemble and bake the pie For the streusel toppingFor the apple filling Toss apples gently but thoroughly to combineMakes one 8-inch cheesecake, 6 to 8 servings Creamy Cheesecake with Walnut Crumb CrustIB-4495A

DFP-3 specifications

The Cuisinart DFP-3 is a compact and versatile food processor designed for food enthusiasts who value efficiency and convenience in the kitchen. With a powerful 250-watt motor, this appliance handles a wide range of tasks, from chopping vegetables to kneading dough, making it an indispensable tool for any culinary setup.

One of the standout features of the DFP-3 is its 3-cup bowl capacity. This size is perfect for small to medium food prep tasks, allowing users to process ingredients without the bulkiness of larger models. The unit is equipped with a stainless steel slicing disc, a shredding disc, and a chopping/mixing blade, which enable it to slice, shred, chop, and mix with remarkable precision. The stainless steel material ensures durability and resistance to corrosion, ensuring the longevity of the blades.

The Cuisinart DFP-3 incorporates a unique patented reversible shredding disc that offers both fine and medium shredding options, enhancing the versatility of the processor. Additionally, its easy-to-use toggle switch provides straightforward control over the three main functions: on, off, and pulse. The pulse feature is particularly useful for incorporating ingredients without over-processing, giving users full control over the texture of their food.

Safety is also a priority with the Cuisinart DFP-3. It features a locking mechanism that ensures the bowl is securely attached before operation, which prevents any accidental spills or mishaps during use. The non-slip rubber feet keep the unit stable on the countertop, further enhancing user safety.

In terms of cleanup, the DFP-3 is designed for convenience, with all removable parts being dishwasher safe. This makes it easy to maintain hygiene and effectively manage different ingredients without the worry of cross-contamination.

Overall, the Cuisinart DFP-3 stands out for its compact design, powerful motor, diverse blade options, and safety features. This food processor is ideal for those looking to streamline their cooking processes while still achieving professional-level results. Whether you are a novice cook or a seasoned chef, the DFP-3 is equipped to simplify your meal preparation and inspire creativity in the kitchen.
Top Page Image Contents