ASSEMBLY & OPERATION
mini Chopper
To attach the chopping blade, chopping bowl and chopping bowl lid.
Remove the blending shaft from the motor body (follow the instructions on page 10 “To detach the blending shaft”).
Place the chopping blade onto the metal pivot pin in the base of the chopping bowl. Place the food inside the chopping bowl. Do not exceed the maximum 'MAX' marking.
Place the lid onto the chopping bowl.
Align the motor body with the chopping bowl lid and push down until the motor body ‘clicks’ into place. Ensure the chopping bowl lid is dry with no water left inside before reattaching.
NOTE
Always place the chopping blade onto the pivot pin on the bottom of the chopping bowl BEFORE placing any food in the bowl. Do not lift the blade before the complete chopping operation is finished.
To use the chopping bowl
For food preparation tips and recipes refer to page 19 and the recipes section of this booklet.
Ensure the chopping bowl is completely and properly assembled.
1.Place food to be processed into the chopping bowl. Do not exceed the 'MAX' marking on the chopping bowl.
2.Insert the plug into a 110/120V power outlet.
3.By turning the speed control dial at the top of motor body, select a speed between 1 and 15.
Low Speed : 1
High Speed : 15
4.Press the trigger switch to turn the mini chopper on. The button must be held for the required duration of operation.
11
BSB510XL_IB_A10_FA.indd 11 | 5/08/10 9:49 AM |