KitchenAid W10379132A Parts Supplied, Style 2 Copper Line Connection, Connect to Refrigerator

Page 22

3.

Place the end of the tubing into a bucket, and turn shutoff

Connect to Refrigerator

 

 

valve ON.

 

4.

Check for leaks. Tighten any nuts or connections (including

Parts Supplied:

 

 

connections at the valve) that leak.

 

Style 2 - Copper Line Connection

¹⁄₄" to ¹⁄₄" (6.35 mm to 6.35 mm) male-to-male coupling

 

 

NOTE: If there is a water supply line that meets the specifications

 

 

in “Water Supply Requirements,” proceed to “Connecting to

 

 

Refrigerator.” If not, use the following instructions to connect to

 

 

the household cold water supply.

 

 

1.

Unplug refrigerator or disconnect power.

 

 

2.

Turn OFF main water supply. Turn ON nearest faucet long

 

 

 

enough to clear line of water.

 

 

3.

Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water

 

 

 

pipe near the refrigerator.

 

 

 

IMPORTANT:

 

 

 

Make sure it is a cold water pipe.

 

 

 

Horizontal pipe will work, but drill on the top side of the

 

1"

 

 

(2.54 cm)

 

pipe, not the bottom. This will help keep water away from

7"

 

 

 

the drill and keep normal sediment from collecting in the

(17.78 cm)

 

 

valve.

 

 

4.Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.

 

A

G

B

 

 

C

F E

D

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

NOTE: The flexible, codes approved water supply line can connect to the supply valve through the floor or through the side cabinets, as indicated by the gray boxes above.

1.Unplug the refrigerator or disconnect power.

2.Connect the 7 ft (2.13 m) flexible codes approved water tube to the water supply valve.

3.Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear.

4.Tape the 7 ft (2.13 m) flexible codes approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference.

D. Compression nut

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from becoming clogged.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

5.Connect the 7 ft (2.13 m) flexible codes approved water supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed in line with the water supply line at the front of the product.

7.

Slip the compression sleeve and compression nut on the

 

copper tubing as shown. Insert the end of the tubing into the

 

outlet end squarely as far as it will go. Screw compression nut

 

onto outlet end with adjustable wrench. Do not overtighten the

 

clamp or the sleeve. This will crush the copper tubing.

8.

Turn off the shutoff valve on the water pipe. Coil the copper

 

tubing.

9.

Connect the flexible, codes approved water supply line to the

 

water shutoff valve by threading the provided nut onto the

 

shutoff valve.

10.

Place the end of the tubing into a bucket, and turn shutoff

 

valve ON.

C

B

A

D

E

F G

11. Check for leaks around the saddle valve. Tighten any nuts or

connections (including connections at the valve) that leak.

A. Household water line

E. Bulb

B. Nut (purchased)

F. Nut

C. Ferrule (purchased)

G. Refrigerator water tubing

D. Coupling

 

6.Turn on the water supply valve and check all connections for leaks.

22

Image 22
Contents Table of Contents/Índice/Table des matières BOTTOM-MOUNT BUILT-IN RefrigeratorÍndice Table of ContentsTable DES Matières Refrigerator Safety Your safety and the safety of others are very importantClassic Series 36 91.4 cm Models ModelsArchitect Series 36 91.4 cm Models Overlay Series 36 91.4 cm ModelsTools and Parts Installation RequirementsOpening Dimensions Location RequirementsRecommended Grounding Method Dimension BElectrical Requirements ModelWater Supply Requirements Tipping RadiusTop View 36 91.4 cm Models Product DimensionsSide View 42 106.7 cm ModelsDoor Swing Dimensions Cabinetry HingeSpacer Panel 90˚ Door Stop Position Hinge PanelOverlay Panel 90˚ Door Stop Position Hinge Custom Overlay Panels 36 91.4 cm Models Custom Overlay Panel DimensionsOverlay Series Custom Panels Custom Backer Panels 36 91.4 cm ModelsTop View Piece Overlay Panel ConfigurationSpacer Panels All models Side ViewClassic Series Custom Panels 36 91.4 cm Models Door Panel Routing Requirements Refrigerator and Side Trim DimensionsClassic and Architect Series Custom Side Panels RefrigeratorOverlay Series Custom Side Panels Refrigerator 42 106.7 cm Models Side Trim 36 91.4 cm Models Inset Installation DimensionsRecessed Inset Installation Dimensions 36 91.4 cm Models Side Trim 42 106.7 cm ModelsReduce Tipping Radius Installation InstructionsUnpack the Refrigerator Move the Refrigerator into HouseConnect the Water Supply Install Anti-Tip BoardsTo Install Anti-tip Boards Connect to Water Line Parts NeededConnect to Refrigerator Parts SuppliedStyle 2 Copper Line Connection Connections including connections at the valve that leakMove Refrigerator to Final Location Plug in RefrigeratorLevel and Align Refrigerator Install Overlay and Classic Series Custom Panels Door Panel InstallationDoor Height Adjustment 42 106.7 cm Models Adjust DoorsDoor Alignment 36 91.4 cm Models Hold the door open to a position that is less than Door Swing Adjustment 36 91.4 cm ModelsDoor stop is located on the top hinge Install Side Panel 110Install Base Grille Complete InstallationSeguridad DEL Refrigerador Su seguridad y la seguridad de los demás es muy importanteSerie Classic modelos de 36 91,4 cm ModelosSerie Architect modelos de 36 91,4 cm Serie Overlay modelos de 36 91,4 cmRequisitos de ubicación Requisitos DE InstalaciónPiezas y herramientas Medidas de la aberturaMétodo de conexión a tierra recomendado Requisitos eléctricosModelo Ancho a Medida B Como se muestra Anteriormente Requisitos del suministro de agua Arco de vuelcoVista superior Modelos de 36 91,4 cm Medidas del productoVista lateral Modelos de 42 106,7 cmMedidas de oscilación de la puerta Armarios Bisagra Panel espaciadorRecubierto Puerta Soporte Posición de retención de la puerta de 90˚ Bisagra PuertaRecubierto Panel espaciador Dimensiones del panel recubierto a la medida Paneles a la medida de la Serie OverlayVista superior Configuración del panel recubierto con puerta de 1 piezaPaneles espaciadores todos los modelos Vista lateralPaneles del refrigerador y del congelador Juegos de extensión de agarraderas de la puertaPanel de la rejilla superior Requisitos de contorneado del panel de la rejilla superiorPanel de la puerta Vista lateral Requisitos de contorneado de los paneles de la puertaMedidas del refrigerador y del adorno lateral Agarradera extendida Vista superiorPaneles laterales a la medida para la Serie Overlay Refrigerador modelos de 42 106,7 cm Adorno lateral modelos de 42 106,7 cmCómo reducir el arco de vuelco Instrucciones DE InstalaciónDesempaque el refrigerador Cómo hacer entrar el refrigerador en la casaCómo instalar los tableros antivuelco Cómo instalar los tableros antivuelcoConexión del suministro de agua Conexión a la línea de agua Piezas necesariasConexión al refrigerador Estilo 2 Conexión de la tubería de cobrePiezas suministradas Cómo enchufar el refrigerador Cómo mover el refrigerador a Su ubicación finalNivelación y alineamiento del refrigerador Instalación del panel de la puerta Paneles Cómo ajustar la altura de la puerta modelos de 42 106,7 cm Cómo ajustar las puertasAlineamiento de la puerta modelos de 36 91,4 cm Quite la placa de fijación, como se muestraCómo instalar el panel lateral Cómo terminar la instalación Cómo instalar la rejilla de la baseClave el borde trasero del panel al tablero de soporte Sécurité DU Réfrigérateur Votre sécurité et celle des autres est très importanteSérie Overlay modèles de 36 91,4 cm ModèlesSérie Architect modèles de 36 91,4 cm Série Classic modèles de 36 91,4 cmDimensions de l’ouverture Exigences ’INSTALLATIONExigences d’emplacement Outillage et piècesMéthode recommandée de mise à la terre Spécifications électriquesPression de leau Spécifications de l’alimentation en eauRayon de basculement Alimentation en eau par osmose inverseVue de dessus Modèles de 36 91,4 cm Dimensions du produitVue latérale Modèles de 42 106,7 cmDimensions pour le pivotement des portes Panneau Charnière Placard’espacement Panneau Séparation De séparation Panneaux personnalisés Dimensions Panneaux personnalisés de la série OverlayVue de dessus Configuration pour panneau Overlay monopiècePanneaux de séparation Tous modèles Vue latéralePanneau de la grille supérieure Ensembles de panneaux dorigineEnsembles de poignées de porte prolongées Panneaux du réfrigérateur et du congélateurExigences dusinage des panneaux de porte Dimensions du réfrigérateur et des garnitures latéralesPanneau de porte Vue latérale Panneaux latéraux personnalisés de La série Overlay Réfrigérateur modèles de 42 106,7 cm Garnitures latérales modèles de 42 106,7 cmRéduction du rayon de basculement Instructions D’INSTALLATIONDéballage du réfrigérateur Faire entrer le réfrigérateur dans le domicileRaccordement à lalimentation en eau Installation de planches antibasculementInstallation des planches antibasculement Raccordement à la canalisation deau Pièces nécessairesPièces fournies Raccordement au réfrigérateurStyle 2 Raccordement de la canalisation d’eau en cuivre Brancher le réfrigérateur Déplacement du réfrigérateur à Lemplacement finalRéglage de laplomb et alignement Du réfrigérateur Installation des panneaux de porte Panneaux Alignement des portes modèles de 36 91,4 cm Ajustement de la des portesRéglage de la hauteur de la porte modèles de 42 106,7 cm Installation du panneau latéral Clouer la rive arrière du panneau sur la planche dappui Installation de la grille de la baseAchever l’installation W10379132A

W10379132A specifications

The KitchenAid W10379132A is a versatile kitchen appliance that enhances culinary experiences through a blend of functionality and innovative design. This attachment is primarily compatible with KitchenAid stand mixers, allowing users to maximize their mixer’s potential by embracing new culinary techniques.

One of the standout features of the W10379132A is its ability to mix, knead, and whip ingredients with ease. It includes a powerful motor and a robust construction that can handle a variety of doughs, from bread to cookie mixtures, ensuring consistent results every time. The motor is designed to minimize noise while providing ample power, so chefs can enjoy a more pleasant cooking experience without compromising on performance.

The attachment also boasts a range of innovative technologies that simplify food preparation. With its adjustable speed settings, users can precisely control the mixing process, allowing for both gentle folding and vigorous stirring, depending on the recipe requirements. This flexibility makes it suitable for both home cooks and professional chefs alike.

Durability is another essential characteristic of the KitchenAid W10379132A. Constructed from high-quality materials, the attachment is designed to withstand the rigors of frequent use. Its seamless design makes cleaning a breeze, as it can be easily detached and washed, either by hand or in a dishwasher, ensuring that hygiene is maintained effortlessly.

Additionally, the W10379132A is equipped with a user-friendly design that makes it easy for anyone to use. The ergonomic handle allows for comfortable handling, while the clearly marked attachments facilitate quick changes between mixing and other culinary tasks. This attention to user experience ensures that both novice cooks and seasoned chefs can achieve excellent results without frustration.

In summary, the KitchenAid W10379132A is more than just a mixer attachment; it is an essential tool for anyone looking to elevate their cooking. With its combination of power, durability, and ease of use, this attachment ensures that culinary creativity can thrive in any kitchen setting. Its myriad features and thoughtful design make it a valuable addition for creating a wide array of delicious dishes with confidence and efficiency.