KitchenAid W10379132A manual Plug in Refrigerator, Move Refrigerator to Final Location

Page 23

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Set control switch at top of cabinet to the OFF position.

2.Plug into a grounded 3 prong outlet.

Move Refrigerator to Final Location

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: To avoid floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before moving.

1.Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2.Do not remove film or cover.

3.Move the refrigerator straight back and evenly into the opening. Be sure that the refrigerator side trims are not interfering with the door opening. Also, be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

Level and Align Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving refrigerator and not for permanent support.

After moving the refrigerator to its final location:

1.Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off the floor.

A B

A

B

A. Rear leveling bolt

B. Front leveling bolt

2.Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinetry. The cabinetry surface must be plumb for the ideal fit of the refrigerator side trim.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents BOTTOM-MOUNT BUILT-IN Refrigerator Table of Contents/Índice/Table des matièresTable DES Matières Table of ContentsÍndice Your safety and the safety of others are very important Refrigerator SafetyOverlay Series 36 91.4 cm Models ModelsArchitect Series 36 91.4 cm Models Classic Series 36 91.4 cm ModelsLocation Requirements Installation RequirementsOpening Dimensions Tools and PartsModel Dimension BElectrical Requirements Recommended Grounding MethodTipping Radius Water Supply Requirements42 106.7 cm Models Product DimensionsSide View Top View 36 91.4 cm ModelsDoor Swing Dimensions Spacer Panel HingeCabinetry Panel 90˚ Door Stop Position HingeOverlay Panel 90˚ Door Stop Position Hinge Custom Backer Panels 36 91.4 cm Models Custom Overlay Panel DimensionsOverlay Series Custom Panels Custom Overlay Panels 36 91.4 cm ModelsSide View Piece Overlay Panel ConfigurationSpacer Panels All models Top ViewClassic Series Custom Panels 36 91.4 cm Models Refrigerator Refrigerator and Side Trim DimensionsClassic and Architect Series Custom Side Panels Door Panel Routing RequirementsOverlay Series Custom Side Panels Side Trim 42 106.7 cm Models Side Trim 36 91.4 cm Models Inset Installation DimensionsRecessed Inset Installation Dimensions 36 91.4 cm Models Refrigerator 42 106.7 cm ModelsMove the Refrigerator into House Installation InstructionsUnpack the Refrigerator Reduce Tipping RadiusConnect to Water Line Parts Needed Install Anti-Tip BoardsTo Install Anti-tip Boards Connect the Water SupplyConnections including connections at the valve that leak Parts SuppliedStyle 2 Copper Line Connection Connect to RefrigeratorLevel and Align Refrigerator Plug in RefrigeratorMove Refrigerator to Final Location Door Panel Installation Install Overlay and Classic Series Custom PanelsDoor Alignment 36 91.4 cm Models Adjust DoorsDoor Height Adjustment 42 106.7 cm Models Door stop is located on the top hinge Door Swing Adjustment 36 91.4 cm ModelsHold the door open to a position that is less than 110 Install Side PanelComplete Installation Install Base GrilleSu seguridad y la seguridad de los demás es muy importante Seguridad DEL RefrigeradorSerie Overlay modelos de 36 91,4 cm ModelosSerie Architect modelos de 36 91,4 cm Serie Classic modelos de 36 91,4 cmMedidas de la abertura Requisitos DE InstalaciónPiezas y herramientas Requisitos de ubicaciónModelo Ancho a Medida B Como se muestra Anteriormente Requisitos eléctricosMétodo de conexión a tierra recomendado Arco de vuelco Requisitos del suministro de aguaModelos de 42 106,7 cm Medidas del productoVista lateral Vista superior Modelos de 36 91,4 cmMedidas de oscilación de la puerta Panel espaciador Armarios BisagraRecubierto Puerta Recubierto Panel espaciador Posición de retención de la puerta de 90˚ Bisagra PuertaSoporte Paneles a la medida de la Serie Overlay Dimensiones del panel recubierto a la medidaVista lateral Configuración del panel recubierto con puerta de 1 piezaPaneles espaciadores todos los modelos Vista superiorRequisitos de contorneado del panel de la rejilla superior Juegos de extensión de agarraderas de la puertaPanel de la rejilla superior Paneles del refrigerador y del congeladorAgarradera extendida Vista superior Requisitos de contorneado de los paneles de la puertaMedidas del refrigerador y del adorno lateral Panel de la puerta Vista lateralPaneles laterales a la medida para la Serie Overlay Adorno lateral modelos de 42 106,7 cm Refrigerador modelos de 42 106,7 cmCómo hacer entrar el refrigerador en la casa Instrucciones DE InstalaciónDesempaque el refrigerador Cómo reducir el arco de vuelcoConexión a la línea de agua Piezas necesarias Cómo instalar los tableros antivuelcoConexión del suministro de agua Cómo instalar los tableros antivuelcoPiezas suministradas Estilo 2 Conexión de la tubería de cobreConexión al refrigerador Nivelación y alineamiento del refrigerador Cómo mover el refrigerador a Su ubicación finalCómo enchufar el refrigerador Instalación del panel de la puerta Paneles Quite la placa de fijación, como se muestra Cómo ajustar las puertasAlineamiento de la puerta modelos de 36 91,4 cm Cómo ajustar la altura de la puerta modelos de 42 106,7 cmCómo instalar el panel lateral Clave el borde trasero del panel al tablero de soporte Cómo instalar la rejilla de la baseCómo terminar la instalación Votre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurSérie Classic modèles de 36 91,4 cm ModèlesSérie Architect modèles de 36 91,4 cm Série Overlay modèles de 36 91,4 cmOutillage et pièces Exigences ’INSTALLATIONExigences d’emplacement Dimensions de l’ouvertureSpécifications électriques Méthode recommandée de mise à la terreAlimentation en eau par osmose inverse Spécifications de l’alimentation en eauRayon de basculement Pression de leauModèles de 42 106,7 cm Dimensions du produitVue latérale Vue de dessus Modèles de 36 91,4 cmDimensions pour le pivotement des portes ’espacement Charnière PlacardPanneau Panneau Séparation De séparation Panneaux personnalisés de la série Overlay Panneaux personnalisés DimensionsVue latérale Configuration pour panneau Overlay monopiècePanneaux de séparation Tous modèles Vue de dessusPanneaux du réfrigérateur et du congélateur Ensembles de panneaux dorigineEnsembles de poignées de porte prolongées Panneau de la grille supérieurePanneau de porte Vue latérale Dimensions du réfrigérateur et des garnitures latéralesExigences dusinage des panneaux de porte Panneaux latéraux personnalisés de La série Overlay Garnitures latérales modèles de 42 106,7 cm Réfrigérateur modèles de 42 106,7 cmFaire entrer le réfrigérateur dans le domicile Instructions D’INSTALLATIONDéballage du réfrigérateur Réduction du rayon de basculementRaccordement à la canalisation deau Pièces nécessaires Installation de planches antibasculementInstallation des planches antibasculement Raccordement à lalimentation en eauStyle 2 Raccordement de la canalisation d’eau en cuivre Raccordement au réfrigérateurPièces fournies Réglage de laplomb et alignement Du réfrigérateur Déplacement du réfrigérateur à Lemplacement finalBrancher le réfrigérateur Installation des panneaux de porte Panneaux Réglage de la hauteur de la porte modèles de 42 106,7 cm Ajustement de la des portesAlignement des portes modèles de 36 91,4 cm Installation du panneau latéral W10379132A Installation de la grille de la baseAchever l’installation Clouer la rive arrière du panneau sur la planche dappui

W10379132A specifications

The KitchenAid W10379132A is a versatile kitchen appliance that enhances culinary experiences through a blend of functionality and innovative design. This attachment is primarily compatible with KitchenAid stand mixers, allowing users to maximize their mixer’s potential by embracing new culinary techniques.

One of the standout features of the W10379132A is its ability to mix, knead, and whip ingredients with ease. It includes a powerful motor and a robust construction that can handle a variety of doughs, from bread to cookie mixtures, ensuring consistent results every time. The motor is designed to minimize noise while providing ample power, so chefs can enjoy a more pleasant cooking experience without compromising on performance.

The attachment also boasts a range of innovative technologies that simplify food preparation. With its adjustable speed settings, users can precisely control the mixing process, allowing for both gentle folding and vigorous stirring, depending on the recipe requirements. This flexibility makes it suitable for both home cooks and professional chefs alike.

Durability is another essential characteristic of the KitchenAid W10379132A. Constructed from high-quality materials, the attachment is designed to withstand the rigors of frequent use. Its seamless design makes cleaning a breeze, as it can be easily detached and washed, either by hand or in a dishwasher, ensuring that hygiene is maintained effortlessly.

Additionally, the W10379132A is equipped with a user-friendly design that makes it easy for anyone to use. The ergonomic handle allows for comfortable handling, while the clearly marked attachments facilitate quick changes between mixing and other culinary tasks. This attention to user experience ensures that both novice cooks and seasoned chefs can achieve excellent results without frustration.

In summary, the KitchenAid W10379132A is more than just a mixer attachment; it is an essential tool for anyone looking to elevate their cooking. With its combination of power, durability, and ease of use, this attachment ensures that culinary creativity can thrive in any kitchen setting. Its myriad features and thoughtful design make it a valuable addition for creating a wide array of delicious dishes with confidence and efficiency.
Top Page Image Contents