KitchenAid Overlay Model Beverage Center Beverage Center Care, Cleaning, Changing the Light Bulb

Page 10

BEVERAGE CENTER CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Clean the beverage center about once a month to prevent odors from building up. Wipe up spills immediately.

To clean your beverage center:

6.Clean the condenser coils regularly. They are located behind the base grille. Coils may need to be cleaned as often as every other month. This may help save energy.

Remove the base grille. See “Base Grille.”

Use a vacuum cleaner with an extended attachment to clean the condenser coils when they are dusty or dirty.

Replace the base grille.

7.Plug in beverage center or reconnect power.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your beverage center. Be sure to replace the bulb with one of the same size, shape, and wattage.

To change the light bulb:

1.Unplug beverage center or disconnect power.

2.Using a Phillips screwdriver, remove the screw located at the back of the light shield. Pull the light shield back to remove the tabs from the appliance. Remove the light shield.

1. Unplug beverage center or disconnect power.

2. Remove all racks and shelves from inside the beverage

center.

3. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

To protect wood trim pieces, do not immerse the entire

rack into water when cleaning.

Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs to 1 qt

[26 g to 0.95 L] of water).

4. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners, or cleaners containing

A

B

C

chlorine. These can scratch or damage materials. Dry

thoroughly with a soft cloth. For additional protection against

damage to painted metal exteriors, apply appliance wax (or

auto paste wax) with a clean, soft cloth. Do not wax plastic

parts.

NOTE: To keep your stainless steel beverage center looking

like new and to remove minor scuffs or marks, it is suggested

that you use the manufacturer’s approved Stainless Steel

Cleaner & Polish. To order the cleaner, see “Accessories.”

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner & Polish to come into

contact with any plastic parts such as the trim pieces,

dispenser covers or door gaskets. If accidental contact does

occur, clean plastic part with a sponge and mild detergent in

warm water. Dry thoroughly with a soft cloth.

5. Replace the racks and shelves.

A. Light shield

B.Tabs

C.Screw

3.Replace the bulb.

4.Reinstall the light shield by inserting the tabs. Align the holes and insert the screw. Tighten the screw.

5.Plug in beverage center or reconnect power.

Vacation and MovingCare

Vacations

If you choose to turn the beverage center off before you leave, follow these steps.

1.Remove all wine bottles from the beverage center.

2.Unplug the beverage center.

3.Clean the beverage center. See “Cleaning.”

4.Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building up.

10

Image 10
Contents Beverage Center Índice Table of ContentsTable DES Matières Beverage Center Safety Before You Throw Away Your Old Refrigerated ApplianceToolsand Parts Installation InstructionsCustom OverlayFrame Unpack the Beverage Center Electrical RequirementsLocation Requirements Recommended grounding methodRemove the Door InstallCustom Overlay FrameClean Before Using Attach the Overlay Frame DoorClosing Install the Door Door Closing Base Grille Usingthe ControlBeverage Center USE Normal SoundsStockingthe Beverage Center Beverage/WineRacksLighting theBeverage Center Changing the Light Bulb CleaningBeverage Center Care Vacation and MovingCareTroubleshooting U.S.A Assistance or ServiceAccessories CanadaItems Kitchenaid will not PAY for Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Disclaimer of Implied Warranties Limitation of RemediesSeguridad DEL Refrigerador Para Bebidas Antes de descartar su viejo aparato refrigeradoPiezas y herramientas Instrucciones DE InstalaciónMarcorecubierto a la medida Método de conexión a tierra recomendado Requisitosde ubicaciónRequisitoseléctricos Vista superiorCómo quitar los materiales de empaque Desempaque del refrigerador para bebidasCómo quitar la puerta Limpieza antes del usoCómo fijar el marco recubierto Cómo instalar la puertaSonidosnormales USO DEL Refrigerador Para BebidasCómocerrar la puerta Rejilla de la base Cómo cerrar la puerta Quite la rejilla de la baseUsodel control Portabebidas/portabotellasCómoiluminar el refrigerador para bebidas Cuidado DEL Refrigerador Para BebidasCómo almacenar en el refrigerador Para bebidas LimpiezaPara cambiar el foco Cómocambiar el focoCuidadodurante las vacaciones y mudanzas VacacionesLas luces no funcionan Solución DE ProblemasParece que el motor funciona excesivamente La temperatura está demasiado calienteEs difícil abrir la puerta Hay acumulación de humedad en el interiorLa puerta no cierra completamente En Canadá Ayuda O Servicio TécnicoEn los EE.UU AccesoriosKitchenaid no Pagará POR LOS Siguientes Artículos Garantía DEL Refrigerador DE KitchenaidGarantía Limitada DE UN AÑO Exclusión DE Garantías Implícitas Limitación DE RecursosSécurité DU Réfrigérateur Pour Boissons Avant de jeter votre vieil appareil réfrigéréOutillage etpièces Instructions D’INSTALLATIONCadre décoratif personnalisé Spécificationsélectriques Exigences demplacementMéthode recommandée de mise à la terre Vue supérieureEnlèvement des matériaux demballage Installation du cadre décoratif personnaliséDéballage du réfrigérateur pour boissons Nettoyage avant utilisationInstallation de la porte Fixation du cadre décoratifFermeture de la porte Grille de la base Réinstallation de la grille de la baseUtilisation DU Réfrigérateur Pour Boissons Sons normauxUtilisation de la commande Grillespourle remisage des Boissons et du vinÉclairage du réfrigérateur pour boissons Entretien DU Réfrigérateur Pour BoissonsStockage dans le réfrigérateurpourboissons NettoyageVacances Changement de lampoule déclairageChangement de lampoule DéménagementLes ampoules ne fonctionnent pas DépannageLe moteur semble fonctionner excessivement La porte est difficile à ouvrir La température est trop élevéeIl existe une accumulation dhumidité à lintérieur La porte ne ferme pas complètementAux États-Unis Assistance OU ServiceAccessoires Au CanadaGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge 2300277 All rights reserved