Electrical Requirements

2.Drill a ¹⁄₂" (1.27 cm) deep hole in the bottom of the overlay frame for the bottom hinge pin as shown.

Bottom View

¹⁷⁄₃₂"

(1.35 mm)

¹⁄₂"

(1.2 cm)

Front Surface

Back Surface

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

A. Radius 5.0

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from beverage center.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your beverage center, allow for a ¹/₄" (6.35 mm) space on each side and at the top. When installing your beverage center next to a fixed wall, leave 2¹⁄₂" (6.35 cm) minimum clearance on each side to allow for the door to swing open.

NOTE: It is recommended that you do not install the beverage center near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C). For best performance, do not install the beverage center behind a cabinet door or block the base grille.

¹⁄₄" (6.35 mm)

2¹⁄₂" (6.35 cm)

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your beverage center into its final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15– or 20–amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your beverage center be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, unplug beverage center or disconnect power.

Unpack the Beverage Center

WARNING

Excessive Weight Hazard

Use two or more people to move and install beverage center.

Failure to do so can result in back or other injury.

Remove the Packaging

■Remove tape and glue residue from surfaces before turning on the beverage center. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your beverage center. For more information, see “Beverage Center Safety.”

Overlay Model Beverage Center specifications

The KitchenAid Overlay Model Beverage Center is the ultimate solution for beverage storage and organization, seamlessly blending functionality and style within your kitchen. This appliance is designed to provide a dedicated space for everything from chilled wines to refreshing sodas, all while maintaining the aesthetic coherence with your kitchen cabinetry thanks to its customizable overlay panel.

One of the main features that sets the KitchenAid Overlay Model apart is its impressive storage capacity. With adjustable shelves, this beverage center can accommodate a variety of bottle sizes and shapes, from standard wine bottles to larger craft beer cans. The glass door not only offers visibility into the contents but also allows for easy access, making it convenient to grab your favorite drink on the go. The interior LED lighting enhances the visibility, illuminating the beverages while minimizing energy consumption.

Temperature control is another standout characteristic of the KitchenAid Overlay Model Beverage Center. Equipped with a sophisticated temperature management system, it ensures that your drinks are stored at optimal temperatures. Users can set two separate temperature zones, making it perfect for keeping wines at the ideal serving temperature while simultaneously chilling other beverages.

The appliance is engineered with a quiet operation technology that maintains a peaceful kitchen ambiance, allowing you to enjoy a tranquil environment without the distraction of unnecessary noise. Additionally, the unit features a door alarm that alerts you if the door is left ajar, preventing fluctuations in temperature that could compromise your beverage inventory.

In terms of design, the KitchenAid Overlay Model Beverage Center is tailored to integrate seamlessly with your existing kitchen décor. The sleek finish and customizable panel options allow homeowners to match the beverage center beautifully with their cabinetry, creating a cohesive and sophisticated look.

Overall, the KitchenAid Overlay Model Beverage Center embodies a blend of stylish design, innovative technologies, and practical features. With its ample storage capacity, precise temperature controls, and quiet operation, it makes a perfect addition to any kitchen or entertaining space, ensuring your beverages are always perfectly chilled and ready to serve.