KitchenAid TX802RTDF-CU10-F-2 SERIES manual Electrical Requirements, Location Requirements

Page 5

Door Hinge Holes

The views of the top and bottom hinge pin hole show a right- hand hinge. Mirror the image for a left-hand hinge.

We recommend using a C-clamp and two pieces of scrap wood (front and back) to help reinforce the overlay frame when drilling the hinge pin holes.

1.Using a ³⁄₈" Brad point doweling drill bit, drill a hole, ⁹⁄₃₂"

(7.1 mm) deep, into the top of the overlay panel for the top hinge pin. Remove the excess wood, surrounding the hole, by using the rotary tool to complete the hinge depression as shown.

Top View

NOTE: It is recommended that you do not install the wine cellar near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C). For best performance, do not install the wine cellar behind a cabinet door or block the base grille.

¹⁄₄" (6.35 mm)

A

⁷⁄₃₂"

(5.5 mm)

¹⁵⁄₃₂"

(12 mm)

Front Surface

Back Surface

³⁄₈"

(9.5 mm)

2¹⁄₂" (6.35 cm)

Electrical Requirements

A. Diameter ³⁄₈" (9.53 mm)

2.Using a ³⁄₈" Brad point doweling drill bit, drill a hole, ⁹⁄₃₂"

(7.1 mm) deep, in the bottom of the overlay frame for the bottom hinge pin. Remove the excess wood, surrounding the hole, by using the rotary tool to complete the hinge depression as shown.

Bottom View

WARNING

⁷⁄₃₂"

(5.5 mm)

A

³⁄₈"

(9.5 mm)

Back Surface

Front Surface

¹⁵⁄₃₂"

(12 mm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

A. Diameter ³⁄₈" (9.53 mm)

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from wine cellar.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your wine cellar, allow for a ¹/" (6.35 mm) space on each side and at the top. When installing your wine cellar next to a fixed wall, leave 2¹⁄₂" (6.35 cm) minimum clearance on the hinge side to allow for the door to swing open.

Before you move your wine cellar into its final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15– or 20–amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your wine cellar be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, unplug wine cellar or disconnect power.

5

Image 5
Contents Wine Cellar Table of Contents/Índice/Table des matièresTable DES Matières Table of ContentsÍndice Take off the door Wine Cellar SafetyBefore You Throw Away Your Old Wine Cellar Overlay Frame Dimensions-Rear View Installation InstructionsInstall Overlay Hooks Tools and PartsLocation Requirements Electrical RequirementsDoor Hinge Holes Recommended grounding methodUnpack the Wine Cellar Install Custom Overlay FrameDoor Closing Install the DoorDoor Closing Remove the masking tape from the doorWine Cellar USE Using the ControlBase Grille Normal SoundsLighting the Wine Cellar Wine RacksStocking the Wine Cellar Wine Cellar Care CleaningChanging the Light Bulb Vacation and Moving CareTroubleshooting Accessories Assistance or ServiceU.S.A CanadaLimited Warranty Kitchenaid Refrigerator WarrantyItems Excluded from Warranty This limited warranty does not coverAntes de descartar su vieja bodega Seguridad DE LA BodegaPiezas y herramientas Instrucciones DE InstalaciónMarco recubierto a la medida Medidas del marco recubierto Vista posteriorRequisitos de ubicación Requisitos eléctricosOrificios de la bisagra de la puerta Método de conexión a tierra recomendadoCómo instalar el marco recubierto La medida Desempaque de la bodegaCómo quitar los materiales de empaque Limpieza antes del usoCómo instalar la puerta Cómo fijar el marco recubiertoSonidos normales USO DE LA BodegaCierre de la puerta Portabotellas Uso del controlCómo almacenar en la bodega Cuidado DE LA BodegaCómo iluminar la bodega LimpiezaCuidado durante las vacaciones Mudanzas Cómo cambiar el focoPara cambiar el foco VacacionesSolución DE Problemas En los EE.UU Ayuda O Servicio TécnicoEn Canadá AccesoriosGarantía Limitada Garantía DEL Refrigerador DE KitchenaidExclusiones DE LA Garantía Esta garantía limitada no cubrePage Avant de jeter votre vieille cave à vin Sécurité DE LA Cave À VINInstallation des crochets pour cadre décoratif Instructions D’INSTALLATIONOutillage et pièces Cadre décoratif personnaliséMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Trous de charnière de porteDéballage de la cave à vin Installation du cadre décoratif personnaliséEnlèvement des matériaux d’emballage Nettoyage avant l’utilisationÔter le ruban adhésif de masquage de la porte Installation de la porteFixation du cadre décoratif Utilisation DE LA Cave VIN Réinstallation de la grille de la baseFermeture de la porte Grille de la base Sons normauxCasiers à vin Utilisation de la commandeStockage dans la cave à vin Entretien DE LA Cave À VINÉclairage de la cave à vin NettoyageChangement de lampoule Changement de lampoule déclairageVacances DéménagementDépannage Accessoires Assistance OU ServiceAux États-Unis Au CanadaGarantie Limitée Garantie DU Réfrigérateur KitchenaidÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage All rights reserved 2300273D

TX802RTDF-CU10-F-2 SERIES specifications

The KitchenAid TX802RTDF-CU10-F-2 SERIES is a remarkable addition to the array of kitchen appliances designed to elevate culinary experiences. This versatile and powerful kitchen tool combines practicality with innovative technology to make cooking more enjoyable and efficient.

At the core of the TX802RTDF-CU10-F-2 SERIES is its robust motor that delivers consistent performance whether you are kneading dough, mixing batters, or whipping cream. The model boasts multiple speed settings, allowing users to select the appropriate speed for different tasks. This customization helps achieve perfect results, whether you're preparing a delicate meringue or mixing heavy cookie dough.

One of the standout features of this series is its generous mixing capacity. The large stainless-steel bowl is designed to handle significant quantities, making it ideal for both everyday cooking and larger gatherings. With a capacity of up to 10 quarts, this appliance can facilitate the preparation of multiple meals or tackle large baking projects with ease.

The TX802RTDF-CU10-F-2 SERIES incorporates advanced technologies such as the Tilt-Head Design, which allows easy access to the bowl and attachments. This feature makes it simple to add ingredients or change attachments without hassle. Additionally, the model is equipped with a variety of attachments, including a flat beater, dough hook, and wire whip, further enhancing its versatility in handling diverse kitchen tasks.

Another notable aspect of the KitchenAid Series is its durability and classic design. Constructed with high-quality materials, the appliance is not just built to withstand the rigors of daily use but also adds an aesthetic appeal to any kitchen décor. The finish options and sleek lines reflect a timeless elegance that can complement a variety of kitchen styles.

Safety and ease of use are also prioritized in the TX802RTDF-CU10-F-2 SERIES. Non-slip feet provide stability during operation, while a safety lock mechanism ensures that the motor does not accidentally engage when the bowl is not properly positioned.

In conclusion, the KitchenAid TX802RTDF-CU10-F-2 SERIES offers an unparalleled combination of power, capacity, and versatility. Whether you are a seasoned chef or a novice cook, this appliance is designed to make your time in the kitchen more enjoyable and productive. With its thoughtful engineering, robust performance, and classic design, it is undoubtedly a worthy investment for any culinary enthusiast.