KitchenAid TX802RTDF-CU10-F-2 SERIES manual Door Closing, Install the Door

Page 7

2.Insert the overlay hooks into the top of the holes in the door. Push against the overlay frame to force the overlay hooks deeper into the door. Pull the overlay frame straight down to secure the overlay hooks to the door.

3.Using a Phillips screwdriver, attach the overlay plates to the bottom of the overlay frame and door as shown.

AB C D

A. Overlay frame

B.Door

C.Overlay plates (2)

D.Round-head screws (8)

Install the Door

IMPORTANT: To ensure proper operation, be sure to grease the top hinge, top spacer and washer with petroleum jelly.

1.Using a Phillips screwdriver and three screws, attach the top spacer to the door.

2.Using petroleum jelly, grease the bottom spacer hole and the bottom hinge pin. Align the washer with the bottom spacer hole.

3.Slowly lower the door straight and evenly onto the bottom hinge pin. Be sure the washer stays in place. Close the door. Be sure the door properly aligns to the cabinet.

NOTE: Provide additional support for the door when moving the hinges. Do not depend on the door magnets to hold the door in place while you are working.

4.Using masking tape, secure the door to the cabinet before installing the top spacer as shown.

A

B

A. Top spacer

B. Masking tape

5.Place the washer on the top spacer and align the holes. Grease the top hinge pin, top spacer and washer with petroleum jelly. Insert the top hinge pin into the washer and top spacer.

6.Using a Phillips screwdriver and three screws, attach the top hinge to the cabinet as shown.

A

B

C

D

E

F

A. Screws (3)

D. Top spacer

B. Top hinge

E. Door

C. Washer

F. Overlay frame

7.Remove the masking tape from the door.

Door Closing

Door Closing

Your wine cellar has four leveling legs. If your wine cellar seems unsteady or you want the door to close more easily, adjust the wine cellar’s tilt using the instructions below.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

WARNING

Excessive Weight Hazard

Use two or more people to move and install wine cellar. Failure to do so can result in back or other injury.

2.Move the wine cellar into its final location.

3.Turn the leveling legs to the right to lower the wine cellar or turn the leveling legs to the left to raise it. It may take several turns of the leveling legs to adjust the tilt of the wine cellar.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Wine Cellar Table of Contents/Índice/Table des matièresÍndice Table of ContentsTable DES Matières Before You Throw Away Your Old Wine Cellar Wine Cellar SafetyTake off the door Tools and Parts Installation InstructionsOverlay Frame Dimensions-Rear View Install Overlay HooksRecommended grounding method Electrical RequirementsLocation Requirements Door Hinge HolesUnpack the Wine Cellar Install Custom Overlay FrameRemove the masking tape from the door Install the DoorDoor Closing Door ClosingNormal Sounds Using the ControlWine Cellar USE Base GrilleStocking the Wine Cellar Wine RacksLighting the Wine Cellar Vacation and Moving Care CleaningWine Cellar Care Changing the Light BulbTroubleshooting Canada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover Kitchenaid Refrigerator WarrantyLimited Warranty Items Excluded from WarrantyAntes de descartar su vieja bodega Seguridad DE LA BodegaMedidas del marco recubierto Vista posterior Instrucciones DE InstalaciónPiezas y herramientas Marco recubierto a la medidaMétodo de conexión a tierra recomendado Requisitos eléctricosRequisitos de ubicación Orificios de la bisagra de la puertaLimpieza antes del uso Desempaque de la bodegaCómo instalar el marco recubierto La medida Cómo quitar los materiales de empaqueCómo instalar la puerta Cómo fijar el marco recubiertoCierre de la puerta USO DE LA BodegaSonidos normales Portabotellas Uso del controlLimpieza Cuidado DE LA BodegaCómo almacenar en la bodega Cómo iluminar la bodegaVacaciones Cómo cambiar el focoCuidado durante las vacaciones Mudanzas Para cambiar el focoSolución DE Problemas Accesorios Ayuda O Servicio TécnicoEn los EE.UU En CanadáEsta garantía limitada no cubre Garantía DEL Refrigerador DE KitchenaidGarantía Limitada Exclusiones DE LA GarantíaPage Avant de jeter votre vieille cave à vin Sécurité DE LA Cave À VINCadre décoratif personnalisé Instructions D’INSTALLATIONInstallation des crochets pour cadre décoratif Outillage et piècesTrous de charnière de porte Exigences d’emplacementMéthode recommandée de mise à la terre Spécifications électriquesNettoyage avant l’utilisation Installation du cadre décoratif personnaliséDéballage de la cave à vin Enlèvement des matériaux d’emballageFixation du cadre décoratif Installation de la porteÔter le ruban adhésif de masquage de la porte Sons normaux Réinstallation de la grille de la baseUtilisation DE LA Cave VIN Fermeture de la porte Grille de la baseCasiers à vin Utilisation de la commandeNettoyage Entretien DE LA Cave À VINStockage dans la cave à vin Éclairage de la cave à vinDéménagement Changement de lampoule déclairageChangement de lampoule VacancesDépannage Au Canada Assistance OU ServiceAccessoires Aux États-UnisLa présente garantie limitée ne couvre pas Garantie DU Réfrigérateur KitchenaidGarantie Limitée Éléments Exclus DE LA GarantiePage All rights reserved 2300273D

TX802RTDF-CU10-F-2 SERIES specifications

The KitchenAid TX802RTDF-CU10-F-2 SERIES is a remarkable addition to the array of kitchen appliances designed to elevate culinary experiences. This versatile and powerful kitchen tool combines practicality with innovative technology to make cooking more enjoyable and efficient.

At the core of the TX802RTDF-CU10-F-2 SERIES is its robust motor that delivers consistent performance whether you are kneading dough, mixing batters, or whipping cream. The model boasts multiple speed settings, allowing users to select the appropriate speed for different tasks. This customization helps achieve perfect results, whether you're preparing a delicate meringue or mixing heavy cookie dough.

One of the standout features of this series is its generous mixing capacity. The large stainless-steel bowl is designed to handle significant quantities, making it ideal for both everyday cooking and larger gatherings. With a capacity of up to 10 quarts, this appliance can facilitate the preparation of multiple meals or tackle large baking projects with ease.

The TX802RTDF-CU10-F-2 SERIES incorporates advanced technologies such as the Tilt-Head Design, which allows easy access to the bowl and attachments. This feature makes it simple to add ingredients or change attachments without hassle. Additionally, the model is equipped with a variety of attachments, including a flat beater, dough hook, and wire whip, further enhancing its versatility in handling diverse kitchen tasks.

Another notable aspect of the KitchenAid Series is its durability and classic design. Constructed with high-quality materials, the appliance is not just built to withstand the rigors of daily use but also adds an aesthetic appeal to any kitchen décor. The finish options and sleek lines reflect a timeless elegance that can complement a variety of kitchen styles.

Safety and ease of use are also prioritized in the TX802RTDF-CU10-F-2 SERIES. Non-slip feet provide stability during operation, while a safety lock mechanism ensures that the motor does not accidentally engage when the bowl is not properly positioned.

In conclusion, the KitchenAid TX802RTDF-CU10-F-2 SERIES offers an unparalleled combination of power, capacity, and versatility. Whether you are a seasoned chef or a novice cook, this appliance is designed to make your time in the kitchen more enjoyable and productive. With its thoughtful engineering, robust performance, and classic design, it is undoubtedly a worthy investment for any culinary enthusiast.
Top Page Image Contents