KitchenAid TX802RTDF-CU10-F-2 SERIES manual Wine Racks, Stocking the Wine Cellar

Page 9

Wine Racks

To Remove and Replace the Wine Racks

1.Pull the rack forward until it stops. Push in on the tabs to release the rack. Continue pulling the rack forward and lift it up and out of the rack supports.

A

A

A.Tabs

2.Replace the rack by inserting the rack into the supports and sliding it toward the rear of the wine cellar.

To Remove and Replace the Bottom Rack

1.Lift the rack (front and back) up and pull straight out to remove.

2.Replace the rack by pushing it straight back and over the stop. Continue pushing the rack straight back and evenly until it is in place.

Stocking the Wine Cellar

NOTE: For optimum wine storage, place white wines at the top of the wine cellar, light red wines in the center and red wines at the bottom.

To Stock the Wine Cellar

1.Start stocking the wine cellar with the bottom display rack.

2.Starting on the left-hand side, place the first bottle on the bottom of the rack with the neck of the bottle facing the back of the wine cellar.

3.Place the next bottle on its side with the neck of the bottle facing the front of the wine cellar.

4.Alternate in this manner until the display rack is full.

5.Pull the next rack forward.

6.Starting on the left-hand side, place the first bottle on the rack with the neck of the bottle facing forward.

7.Place the next bottle on the shelf with the neck of the bottle facing the rear of the wine cellar.

8.Continue alternating in this manner until the rack is full.

9.Slide the rack into place and continue stocking each remaining rack as described above.

Lighting the Wine Cellar

The wine cellar has an interior light that comes on any time the door is opened. You may also turn the light on at any time by opening the door and pressing the exterior switch located beside the temperature control knob on the base grille.

NOTE: Leaving the light on for an extended period of time will slightly increase the temperature of the wine cellar.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Wine Cellar Table of Contents/Índice/Table des matièresTable of Contents ÍndiceTable DES Matières Wine Cellar Safety Before You Throw Away Your Old Wine CellarTake off the door Overlay Frame Dimensions-Rear View Installation InstructionsInstall Overlay Hooks Tools and PartsLocation Requirements Electrical RequirementsDoor Hinge Holes Recommended grounding methodUnpack the Wine Cellar Install Custom Overlay FrameDoor Closing Install the DoorDoor Closing Remove the masking tape from the doorWine Cellar USE Using the ControlBase Grille Normal SoundsWine Racks Stocking the Wine CellarLighting the Wine Cellar Wine Cellar Care CleaningChanging the Light Bulb Vacation and Moving CareTroubleshooting Accessories Assistance or ServiceU.S.A CanadaLimited Warranty Kitchenaid Refrigerator WarrantyItems Excluded from Warranty This limited warranty does not coverAntes de descartar su vieja bodega Seguridad DE LA BodegaPiezas y herramientas Instrucciones DE InstalaciónMarco recubierto a la medida Medidas del marco recubierto Vista posteriorRequisitos de ubicación Requisitos eléctricosOrificios de la bisagra de la puerta Método de conexión a tierra recomendadoCómo instalar el marco recubierto La medida Desempaque de la bodegaCómo quitar los materiales de empaque Limpieza antes del usoCómo instalar la puerta Cómo fijar el marco recubiertoUSO DE LA Bodega Cierre de la puertaSonidos normales Portabotellas Uso del controlCómo almacenar en la bodega Cuidado DE LA BodegaCómo iluminar la bodega LimpiezaCuidado durante las vacaciones Mudanzas Cómo cambiar el focoPara cambiar el foco VacacionesSolución DE Problemas En los EE.UU Ayuda O Servicio TécnicoEn Canadá AccesoriosGarantía Limitada Garantía DEL Refrigerador DE KitchenaidExclusiones DE LA Garantía Esta garantía limitada no cubrePage Avant de jeter votre vieille cave à vin Sécurité DE LA Cave À VINInstallation des crochets pour cadre décoratif Instructions D’INSTALLATIONOutillage et pièces Cadre décoratif personnaliséMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Trous de charnière de porteDéballage de la cave à vin Installation du cadre décoratif personnaliséEnlèvement des matériaux d’emballage Nettoyage avant l’utilisationInstallation de la porte Fixation du cadre décoratifÔter le ruban adhésif de masquage de la porte Utilisation DE LA Cave VIN Réinstallation de la grille de la baseFermeture de la porte Grille de la base Sons normauxCasiers à vin Utilisation de la commandeStockage dans la cave à vin Entretien DE LA Cave À VINÉclairage de la cave à vin NettoyageChangement de lampoule Changement de lampoule déclairageVacances DéménagementDépannage Accessoires Assistance OU ServiceAux États-Unis Au CanadaGarantie Limitée Garantie DU Réfrigérateur KitchenaidÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage All rights reserved 2300273D

TX802RTDF-CU10-F-2 SERIES specifications

The KitchenAid TX802RTDF-CU10-F-2 SERIES is a remarkable addition to the array of kitchen appliances designed to elevate culinary experiences. This versatile and powerful kitchen tool combines practicality with innovative technology to make cooking more enjoyable and efficient.

At the core of the TX802RTDF-CU10-F-2 SERIES is its robust motor that delivers consistent performance whether you are kneading dough, mixing batters, or whipping cream. The model boasts multiple speed settings, allowing users to select the appropriate speed for different tasks. This customization helps achieve perfect results, whether you're preparing a delicate meringue or mixing heavy cookie dough.

One of the standout features of this series is its generous mixing capacity. The large stainless-steel bowl is designed to handle significant quantities, making it ideal for both everyday cooking and larger gatherings. With a capacity of up to 10 quarts, this appliance can facilitate the preparation of multiple meals or tackle large baking projects with ease.

The TX802RTDF-CU10-F-2 SERIES incorporates advanced technologies such as the Tilt-Head Design, which allows easy access to the bowl and attachments. This feature makes it simple to add ingredients or change attachments without hassle. Additionally, the model is equipped with a variety of attachments, including a flat beater, dough hook, and wire whip, further enhancing its versatility in handling diverse kitchen tasks.

Another notable aspect of the KitchenAid Series is its durability and classic design. Constructed with high-quality materials, the appliance is not just built to withstand the rigors of daily use but also adds an aesthetic appeal to any kitchen décor. The finish options and sleek lines reflect a timeless elegance that can complement a variety of kitchen styles.

Safety and ease of use are also prioritized in the TX802RTDF-CU10-F-2 SERIES. Non-slip feet provide stability during operation, while a safety lock mechanism ensures that the motor does not accidentally engage when the bowl is not properly positioned.

In conclusion, the KitchenAid TX802RTDF-CU10-F-2 SERIES offers an unparalleled combination of power, capacity, and versatility. Whether you are a seasoned chef or a novice cook, this appliance is designed to make your time in the kitchen more enjoyable and productive. With its thoughtful engineering, robust performance, and classic design, it is undoubtedly a worthy investment for any culinary enthusiast.
Top Page Image Contents