Changing the Light Bulb
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.
To change the light bulb:
1.Unplug refrigerator or disconnect power.
2.Using a Phillips screwdriver, remove the screw located at the back of the light shield. Pull the light shield back to remove the tabs from the appliance. Remove the light shield.
Vacation and Moving Care
Vacations
If you choose to leave the refrigerator on while you’re away, use up any perishables and freeze other items.
If you choose to turn the refrigerator off before you leave, follow these steps.
A
B
C
1.Remove all food from the refrigerator.
2.Unplug the refrigerator.
3.Clean the refrigerator. See “Cleaning.”
4.Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building up.
Moving
When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.
A. Light shield
B.Tabs
C.Screw
3.Replace the bulb.
4.Reinstall the light shield by inserting the tabs. Align the holes and insert the screw. Tighten the screw.
5.Plug in refrigerator or reconnect power.
1.Remove all food from the refrigerator.
2.Unplug the refrigerator.
3.Clean, wipe, and dry it thoroughly.
4.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.
5.Tape the doors shut and tape the power cord to the back of the refrigerator.
When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator will not operate
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
■Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
■Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit.
■Is the Refrigerator Control turned to the OFF position? See “Using the Control.”
The lights do not work
■Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulb.”
The motor seems to run too much
■Is the temperature outside hotter than normal? Expect the motor to run longer under warm conditions. At normal outdoor temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more of the time.
10